PDA

View Full Version : Mods before or after?



Tallboy
05-04-2005, 05:32 AM
OK, Trilogy guys-I've made up my mind on a couple things I was thinking about. But, as usual, I want your input. For those of you with the Trilogy kit and other mods I want to know if you did the additional mods before or after you installed the blower.

Thanks in advance...:beer:

Deebar
05-04-2005, 06:12 AM
Trilogy sc first, then Nittos w/DRs and 4.10s. Phase 3 was better breathing with Kooks long tubes, custom 2 1/2 inch exhaust, JLT intake and 2.8 pulley. 500 miles later MMX drive shaft rear end girdle and stud kit. Next up- fuel pump upgrade, big brakes (Jerry?!?) and possibly an accufab TB.

Cobra25
05-04-2005, 07:31 AM
OK, Trilogy guys-I've made up my mind on a couple things I was thinking about. But, as usual, I want your input. For those of you with the Trilogy kit and other mods I want to know if you did the additional mods before or after you installed the blower.

Thanks in advance...:beer:
Did most of the mods before the S/C with the exception of the K&N Air Charger Kit & the DiabloSport Mafia -MAF extender.

Tallboy
05-05-2005, 01:12 PM
Did most of the mods before the S/C with the exception of the K&N Air Charger Kit & the DiabloSport Mafia -MAF extender.Z, thanks again for letting me drive your car! Your car is the reason I'm going with the K&N and the 10.5 PSI pulley.:up:

MARAUDER S/C #5
05-05-2005, 02:08 PM
After...............

Roger D
05-05-2005, 06:01 PM
4.10's and bigger rims simultaneously during the s/c install before the car was registered - swaybar after, kooks, intake, speakers and lights to come.


Roger D

BillyGman
05-06-2005, 12:07 AM
Everything was before the S/Cer except the Nitto drag radials. I never had any need for drag radials until I S/Ced the car.

Cobra25
05-06-2005, 06:27 AM
Z, thanks again for letting me drive your car! Your car is the reason I'm going with the K&N and the 10.5 PSI pulley.:up: You might want if you get the 10.5 pully to change the belt so it's not at the end of the tensioner. The new Belt # NAPA 25- 080505. Cost $26.99. You will need a second hand getting it on.

bigslim
05-06-2005, 08:34 AM
Had the 410's and the K&N before the kit.