PDA

View Full Version : TA Performance / FRPP/SVO Girdle cover + e-brake bracket issue


metroplex
05-20-2005, 02:20 PM
I just did the cover install today and discovered the e-brake bracket clips onto the e-brake cable.

I removed the bracket and just slipped a wire loom over the e-brake cable to prevent chaffing/damage from rubbing. Voila, Mustanganized...

I hope this information helps someone.
rocknrod
05-20-2005, 06:00 PM
Ever see the old Charlie Brown cartoons, where the parent is speaking.......?:dunno:
I never thught I'd say this, but sometimes I don't think I'm "with it". . . .
metroplex
05-20-2005, 07:37 PM
wob wob wob wob? wob wob wob!!! wob wob! wob? wob! Wob, wob wob wob; wob wob.
BK_GrandMarquis
05-20-2005, 08:27 PM
wob wob wob wob? wob wob wob!!! wob wob! wob? wob! Wob, wob wob wob; wob wob.
I think he's lost it. :dunno:
metroplex
05-21-2005, 04:06 AM
There was a thread awhile back where someone was asking about what to do with the e-brake bracket when upgrading to the SVO cover.

Some people left it there.... but I found that the bracket simply clips onto the e-brake. Unclip the bracket and remove it altogether.
Bonedriver
05-21-2005, 10:16 PM
I just left mine hanging after I put the FRPP cover on... I then had this weird clanging noise coming from the rear. I put some 1/4" foam and afixed it with electrical tape. Ghetto... yes. Can anyone see it... no.
metroplex
05-22-2005, 08:10 AM
I didn't leave mine hanging because this is why.

The bracket is clipped onto the cable. Just unclip it. :dontknow:
SergntMac
05-22-2005, 08:10 AM
There was a thread awhile back where someone was asking about what to do with the e-brake bracket when upgrading to the SVO cover.

Some people left it there.... but I found that the bracket simply clips onto the e-brake. Unclip the bracket and remove it altogether.
Came up #2 in a search for "SVO girdle"

http://www.mercurymarauder.net/forums/showthread.php?t=17432&highlight=SVO+girdle