Log in

View Full Version : Three bar spinners anyone?



Bowman9
06-13-2005, 04:09 PM
Here's a site selling three bar spinners (straight & slanted) for modern ford rims.
You use your exsisting center caps.
I wonder what they would look like on marauder rims?

http://www.brsparts.com/homepg2.html

MarauderMark
06-13-2005, 04:27 PM
Too much bling fer me..

QWK SVT
06-13-2005, 04:56 PM
Too much bling fer me..
I'm with you... They would stick out past the fenders on our cars :down:

dwasson
06-13-2005, 05:24 PM
I wonder what they would look like on marauder rims?


I don't think Logan will let us say.

BK_GrandMarquis
06-13-2005, 05:48 PM
Here's a site selling three bar spinners (straight & slanted) for modern ford rims.
You use your exsisting center caps.
I wonder what they would look like on marauder rims?

http://www.brsparts.com/homepg2.html

I thought those were called knock-offs because you would use a rubber mallet to knock them off the wheel. I think the real ones are used with some safety wire to prevent the knock-off from spinning off completely from the wheel.

Joe Walsh
06-13-2005, 05:55 PM
I thought those were called knock-offs because you would use a rubber mallet to knock them off the wheel. I think the real ones are used with some safety wire to prevent the knock-off from spinning off completely from the wheel.


Yep....Cobras have 'pin drive' wheels with 'knock-off' spinners.
Reverse threaded on the passenger's side and they should be safety wired,..... as a loose spinner will quickly get you in deep doo doo! :(

Back to the thread....I think that the spinners look good on Mustangs. but I'm not sure about the Marauder....

If you did use them, they would be good for dicing up small offending rodents on the side of the road!

Or, maintaining proper lane control in heavy traffic....

(Kinda like the Ben Hur chariot race!!)

SergntMac
06-13-2005, 06:27 PM
Yep....Cobras have 'pin drive' wheels with 'knock-off' spinners.
You mean Shelby AC Cobras, Joe, right? Not the SVT Cobra based on a Mustang more familiar today. Don't want the kiddies to get confused, do we?

I think these spinners are neat, and a real timesaver too. You can edge the front lawn while backing down the drive...

Joe Walsh
06-13-2005, 06:35 PM
You mean Shelby AC Cobras, Joe, right? Not the SVT Cobra based on a Mustang more familiar today. Don't want the kiddies to get confused, do we?

I think these spinners are neat, and a real timesaver too. You can edge the front lawn while backing down the drive...

:lol:


Yes, I did mean the Shelby AC Cobras....sorry for any confusion.

I hope no one thought I was speaking of the 'highly desirable' COBRA II Mustang from the mid 70s!!!

CBT
06-13-2005, 07:44 PM
Corvettes had them too, if I'm not mistaken.

texascorvette
06-13-2005, 08:09 PM
:lol:


Yes, I did mean the Shelby AC Cobras....sorry for any confusion.

I hope no one thought I was speaking of the 'highly desirable' COBRA II Mustang from the mid 70s!!!
Now that may be the funniest thing I've seen in any of these threads!!!!