COMMAND Automotive Rotors Now Available

[wchain]

I just finished getting set up with COMMAND Automotive, to start carrying their Rotors. COMMAND makes rotors custom suited for Severe Service/Police Vehicles.

COMMAND's SD1 Rotors offer Shorter Stopping Distances, outlast standard Rotors by 300-400%, and Increases Brake Pad Life 200-300% regardless of pad brand.

These rotors are cryogenically processed, and are virutally fade resistant, and the rotors are garunteed against warpage for the life of the product!!

I'm going to get a set for my car as a 'tester' but all the CVPIs that Innovative buys from Texas DPS are equipped with COMMAND brake rotors.

COMMAND recommends no particular pad, but I personally have been installing Wagner Thermoquiets on 98-02 cars with these rotors with good results, not to mention We have a one time wear down warranty on Thermoquiet pads (you can swap them out for a new set once, as long as they're not metal to metal), just call us, and we'll send you another set of pads, free, as long as you send us the old ones back!

Pricing is as follows:
03-05 CV/GM/MM Front $129.48
03-05 CV/GM/MM Rear $105.57

98-02 CV/GM Front $112.40
96-02 CV/GM Rear $76.44

Due to the wait, I am unable to offer free shipping on these rotors. But these rotors are generally unavailable to the public

FWD Impalas and Chevrolet Tahoe, and Intrepids are also Available.

[torinodan]

Bout time, this is something I've been waiting for. Thanks for being the test bench.

[twolow]

How do you like them Wes? Are they installed and working in your DTR now?

[MarauderMark]

Is this price each or for front set and back set.

Pricing is as follows:
03-05 CV/GM/MM Front $129.48
03-05 CV/GM/MM Rear $105.57

[RoyLPita]

I guess that they are not available for my '95 CVPI. Are they crossdrilled and/or slotted?

[torinodan]

Linky linky:
http://www.commandautomotive.com/default.htm

[TheDonk]

It would be nice to see some update to this thread. Answers to questions.
Info on ordering - that is if they are actually going to be available for sale.
Thread was started 3 weeks ago w/ no followup.

[wchain]

Is this price each or for front set and back set.

Pricing is as follows:
03-05 CV/GM/MM Front $129.48
03-05 CV/GM/MM Rear $105.57

Pricing is per rotor.

[wchain]

It would be nice to see some update to this thread. Answers to questions.
Info on ordering - that is if they are actually going to be available for sale.
Thread was started 3 weeks ago w/ no followup.

Sorry for the Delay, I have the rotors, and plan on installing them either this weekend or the next. I should have ordering up soon for them as well!

Thanks for your patience!
Wes

[MENINBLK]

I wish I would have seen this earlier...
I just finished paying $100 to have my rotors turned.

[Dave Compson]

I recieved my command front rotors and new pads. Ill probably install them at the same time i am working on my engine. Ill let you know. Thanks wes! Prompt service, great advise!

[TheDonk]

I take it we can order them now???

[wchain]

I take it we can order them now???

Yessir! :burnout:

[torinodan]

And any updates on how they perform?:confused: I'm thinking of these with SS lines would be a great move for someone who doesn't want BIG brakes and they can use parts that look OEM.

[torinodan]

And any updates on how they perform?:confused: Bump bump:woohoo:

[wchain]

FINALLY INSTALLED!

I've driven several pre 03 cars with these rotors and a few 2003+ Crown vics, but on the MM, The Stopping Power is AMAZING. These rotors are totally fade free and grip TENACIOUSLY!

I am using Wagner Thermoquiet Pads (Ceramic) with the car, and there is no noise and the stops are great. I have made some (ahem) Higher speed stops, and there is no warpage or fade from triple digit speeds (on a controlled test area).

Right now, if you purchase a set of four (front and rear) I'm offering Free Shipping, (a set of 4 weighs well over 60 lbs!!), and 20% Discount on any brake pads purchased from us!

Wagner Thermoquiet (Choose either Semi Metallic or Ceramic)
Hawk HPS Pads

[Dave Compson]

I am installing mine on saturday. One car project a weekend. Last week new head, this week front brakes - oil change - php intake spacer. Ill post more later.

[Cobra25]

I guess that they are not available for my '95 CVPI. Are they crossdrilled and/or slotted? I also wish to know if they are cross drilled & or Slotted?

[wchain]

I also wish to know if they are cross drilled & or Slotted?

Nope, dont need to be. These rotors are used in Police Duty CVPIs and they have a hard time getting them to warp! Texas DPS is now using them now.

I do carry Powerslot Slotted and Powerslot Cryogenic Slotted as well.

[MENINBLK]

Do the rear rotors have the drums incorporated
for the emergency brake or are they separate?

Does your emergency brake hold the Marauder any better
than the stock rotors?