maf adapter

[txmarauder]

For those of you DIY CAI guys http://cgi.ebay.com/ebaymotors/Ford-Mustang-Cobra-Marauder-air-filter-adaptor_W0QQitemZ7995278649QQc ategoryZ43946QQrdZ1QQcmdZViewI tem

[Petrograde]

jeez,.. looks like this guy was welding blindfolded!
http://i12.ebayimg.com/03/i/04/c7/a2/c9_1_b.JPG

[Logan]

You flyboy mechanics are just picky... :D

[MENINBLK]

For those of you DIY CAI guys http://cgi.ebay.com/ebaymotors/Ford-Mustang-Cobra-Marauder-air-filter-adaptor_W0QQitemZ7995278649QQc ategoryZ43946QQrdZ1QQcmdZViewI tem

But where does the other side mount to ??? :dunno:

[torinodan]

But where does the other side mount to ??? :dunno:Looks like an F-150 or some other truck.

[SergntMac]

It's a mounting bracket from somewhere in cyber-supercharger land that happens to fit a Marauder.

It comes with one of many Vortech kits, but Vortech is rather "quiet" about that stuff. They parse out 411 sparingly, just like Trilogy, and it's Ford Racing part numbers.

If you have a Marauder with a centrifugal blower, with an air source behind the passenger side fog lamp, and you have upgraded from the OEM/stock 80mm MAF to the 90mm MAF from the Lightening, or, added the SCT "Big Air" which is also a 90mm MAF, this part is for you.

If this part fit your needs, jump on it. You won't find it elsewhere. The seller has another bracket listed that would likewise fit this application, just make sure you need it before you bid.

I know this because I just recently switched from a "blow through" air source, to a "suck through", and I needed this bracket to move my MAF and conical filter from under the hood on the driver's side, to behind the passenger side fog lamp, and accomodate the 10mm swelling as well. Last time I looked, there are only five of us here at our MM.Net who could possibly want to make this change. Oops...Make that four.

Don't get your undies in a bunch over it's looks. After you install it, no one will ever see it again.