need center cap measurements or photos

[67merc]

hello i'm putting the mercgod caps on 05 mustang wheels for my 67 mercury, need to know if they will fit, a measurement of the cap itself, the wheel opening for the cap or even a good photo of the rear of the cap is appreciated, also a source for 4 caps or even good decals thanks nice marauder site.

[TheDonk]

hello i'm putting the mercgod caps on 05 mustang wheels for my 67 mercury, need to know if they will fit, a measurement of the cap itself, the wheel opening for the cap or even a good photo of the rear of the cap is appreciated, also a source for 4 caps or even good decals thanks nice marauder site.

2 1/4" diameter.

[Petrograde]

ask and ye shall receive! :P

[67merc]

ask and ye shall receive! :P
is 2 1/4 the opening because another guy says the face of the emblem is 2 9/16

[fast Ed]

I don't have measurements off hand, but I don't believe that they will fit the 05 Mustang wheels. The MM caps fit the Mustang wheels up to 04. When I first had some of the 05 and 06 Mustang wheels in at the dealership, I tried the earlier style pony caps, and they were close, but didn't snap in.

cheers
Ed N.

[TheDonk]

is 2 1/4 the opening because another guy says the face of the emblem is 2 9/16

The diameter of the opening is 2 1/4" (Face will be bigger).
BTW the Merc head is held on to the insert assembly by double stick tape. :)

[67merc]

The diameter of the opening is 2 1/4" (Face will be bigger).
BTW the Merc head is held on to the insert assembly by double stick tape. :)
great the opening on the 05 stang wheels is 2.25 also, i think i can make it work. any place to get them other than fleabay or dealer?....

[X369]

Contact member Ray "The Dealer" for the center caps. What model 67 do you have? Could you post pics when you put the wheels on?

Thanks,
Ron

[67merc]

My car is a 67 caliente, 390 c-6 tripower carbs fiberglass hood. A marauder is in my future, as soon as i pay off my wife's new mountaineer. here's a link to some photo's some are old, the 05 stang wheels will need spacers to fit. i'm just mocking them up for now, the mercman caps are from some 68 spinner caps i bought off ebay.

http://www.picturetrail.com/gallery/view?p=999&gid=6137062&uid=3028367&members=1

[TheDealer]

The caps measure 2.25 ID where it fits into the wheel. The OD is 2 9/16. They retail for $39.33 ea. and would cost you $28.10 ea. Shipping would be about $8.00. Here's my 67 Comet Cyclone.
http://www.mustangmods.com/data/85/comet_auto_rush.jpg

[67merc]

The caps measure 2.25 ID where it fits into the wheel. The OD is 2 9/16. They retail for $39.33 ea. and would cost you $28.10 ea. Shipping would be about $8.00. Here's my 67 Comet Cyclone.
http://www.mustangmods.com/data/85/comet_auto_rush.jpg
need any cyclone hubcaps? have a pretty nice set i no longer need? also pic didn't show for me, i'll let you know if i decide to get them. your price can't be beat.