PDA

View Full Version : Cruise Control Light


Canadasvt
10-14-2005, 10:50 AM
I hope this is not a repost. I searched and couldn't find anything.
Does anyone know where the light on the dash is to remind you that the cruise is on? I don't have one.
mcb26
10-14-2005, 11:01 AM
Don't think there is one. I never use cruse anyway.
Breadfan
10-14-2005, 11:05 AM
There isn't one as far as I know.
Sully008
10-14-2005, 11:20 AM
Yup, there isn't one. I found this rather odd in my CV when I tried the cruise for the first time. I thought it wasn't working when I turned it on and no light in the gauges lit up. My Taurus had a cruise light though.
jgc61sr2002
10-14-2005, 01:34 PM
That's correct there is no light for the cruise control on the Marauder. :(
LordVader
10-14-2005, 02:25 PM
No light to indicate "Cruise" on the MM. Found it a little strange at first, but used to it now.
RoyLPita
10-14-2005, 02:56 PM
Only the digital dash in both of my 1992 GMs had a cruise light.
Canadasvt
10-14-2005, 08:23 PM
Thanks everyone for confirming this. Now I can stop trying to find it:)
merc6
10-31-2005, 06:42 AM
Only the digital dash in both of my 1992 GMs had a cruise light. with that being said... can the grand marquis gauges work in our cars?

http://www.mercuryvehicles.com/grandmarquis/img/main_int_5.jpg
CBT
10-31-2005, 09:56 AM
AAAACCCKK!!!
with that being said... can the grand marquis gauges work in our cars?

http://www.mercuryvehicles.com/grandmarquis/img/main_int_5.jpg
the_pack_rat
10-31-2005, 10:03 AM
While I've personally never had one out &/or apart ...

I was told there really wasn't any room left in the cluster to put one.
RF Overlord
10-31-2005, 10:06 AM
That steering wheel is fo' ****ZLE! I'm a-gonna get me one! :rolleyes:
SergntMac
10-31-2005, 10:16 AM
There is a cruise control indicator in our gauge panel, it's next to the OD Off indicator, but blacked out from behind. The're a socket for a lamp in the PCB as well, but I have no idea why this feature was not implemented. I'm not sure sticking a bulb in place would make it work.

Come to think of it, there are a number of blank squares in the gauge panel, suggesting useful locations for mounting accessory LEDs. Taking the gauge panel out isn't a serious project, and all is quite accessible. Just be patient with the plastic, it's not all that durable. The only sealed unit, is the speedo. Hope this helps.