Badgeless grill install?

[Matt Johnson]

Can someone take me through these steps, or direct me to the thread that does so. Got my grill from Zach about 5 months ago and finally have 5 minutes to spend putting it on. Hopefully someone can help me out here...

[Marauderman]

It's been awhile but I think it went something like this----

_ Open hood and take off the plastic cover inside front of the engine.
_ Reach inside under lip and use a pliers to unscrew bolts on post holding grill
in place--( loosen and then you should be able to use your fingers to remove rest of bolts)There is a bunch--about 6-
or so across the inside top.
- Pull out grill by slight twisting and pulling and it should come loose--The bottom is a snap in I believe-(help here
anyone).
_ Pull off and replace with new one--using same bolts--just don't tighten to tight---just snug...
_ replace top shelf plastic guard and close hood--BooM! Done.

[Agent M79]

11mm socket.

You'll be able to see where they are and where the clips are by looking at the grille you are getting ready to install, so don't worry about missing one.

The rating (1 to 10) of this project on the MM Difficultomometer is: 1 [ding!]

Seriously, it's harder to wash the car than it is to change the grille.

[fastblackmerc]

marauderman & AgentM79 are correct. Very easy to do, just take your time so you don't chip or scratch your new or old grill.

[Matt Johnson]

Excellent. Thanks everyone.