Billatpro
04-03-2003, 03:09 PM
I have been beating bushes for every mod I can find for our cars and I think I have found an interesting alternative.
Macs process of stages has served as a catalist in my thinking and set me on a mission to formulate a sane and reasonable process of Modifications.
3 or more "Stages" of building blocks can be put together in a logical order and "stacked" one the other that could any level to anyones needs goals.
I have had several conversations with a few individuals who are now involoved in development work on this car and have some "Kit's" already to go. these kits seem to me to be a good starting point.
At this moment I am waiting to receive more complete information and pricing, until I have these I won't detail this any further.
Mac, a question for you. Not wanting to pry to much but would you be adverse to telling us this : for the performance level your at, how much have you spent? if you don't to put that in print or a PM, well I understand.
My point was to compare what you have spent with what one might spend on an alternative. I'm guessing something short of $2500.00 (Parts) which would be a bargin for your result!
I know you have posted your results in your sig. but I don't recall them right off but I have seen results (on paper) of one kit that would produce 300HP and 386 lbs of twist at the wheels for about $3600.00 (parts) and would be the first building block for a future Blower!
Now if any one has slightest bit of interest I will be glad to upload the stages layout as soon as Im finished, a week or so should do it.
Macs process of stages has served as a catalist in my thinking and set me on a mission to formulate a sane and reasonable process of Modifications.
3 or more "Stages" of building blocks can be put together in a logical order and "stacked" one the other that could any level to anyones needs goals.
I have had several conversations with a few individuals who are now involoved in development work on this car and have some "Kit's" already to go. these kits seem to me to be a good starting point.
At this moment I am waiting to receive more complete information and pricing, until I have these I won't detail this any further.
Mac, a question for you. Not wanting to pry to much but would you be adverse to telling us this : for the performance level your at, how much have you spent? if you don't to put that in print or a PM, well I understand.
My point was to compare what you have spent with what one might spend on an alternative. I'm guessing something short of $2500.00 (Parts) which would be a bargin for your result!
I know you have posted your results in your sig. but I don't recall them right off but I have seen results (on paper) of one kit that would produce 300HP and 386 lbs of twist at the wheels for about $3600.00 (parts) and would be the first building block for a future Blower!
Now if any one has slightest bit of interest I will be glad to upload the stages layout as soon as Im finished, a week or so should do it.