PDA

View Full Version : Need a rear 21mm Sway bar



Berts444
12-13-2005, 06:59 PM
Hi there, Long time lurker, first time poster.

If anyone out there has a 21mm rear sway bar taking up space in their garage (from an Addco upgrade etc.) that they'd like to sell, please e-mail me at the address below. (a new 21mm sway bar from Ford for an HPP Vic is only $50 bucks, I don't know why, but I figured I's ask here first.)

Looking to upgrade my wimpy 17 mm rear bar in my 2002 P71. I read here on www.crownvic.net that alot of you MM folks like the bigger bars and therefore have the old ones possibly just lying around!

Thanks for any / all help!
C~
Southestern MA
2002 Ford P71 W/ Street appearance / Admin package Ex Boston Based Federal vehicle
CSCharron@hotmail.com
:beer:

SergntMac
12-13-2005, 07:29 PM
Are you sure the sway bar you seek will fit your 2002 CV?

For the Marauder, the rear shocks went outboard of the frame, which may have changed some mounting locations for the sway bar as well. Lot's of our suspension stuff was not backward compatabile with previous Panther framed automobiles. Please double check your measurements, what you ask for may not buy you what you want.

Berts444
12-13-2005, 07:47 PM
As far as I know, all the panther rear bars are the same 98+. I checker FordPartsnetwork.com Good point on the 03+ rear & front suspensions being different. I will double check, but I was under the assumtion (I know, I know.....what happens when you ass-u-me) and I'll get right back.
Thanks for the input,
C~

Rider90
12-13-2005, 08:39 PM
If they are compatible and you're interested, PM me an offer. I don't know how I'm going to ship this :shake:

MM03MOK
12-13-2005, 09:05 PM
:welcome: C~ So, you're not far from me?? We're getting a small group together on Saturday in Wrentham. Check out this thread.....

http://www.mercurymarauder.net/forums/showthread.php?t=22667

jgc61sr2002
12-13-2005, 09:27 PM
Berts444 - Welcome to the MM site.:D :welcome: