View Full Version : Are the MM engines more like Mach 1 setups or 01 Cobra?
Vortech347
12-22-2005, 10:42 AM
I've read both. I'm leaning more towards the Mach 1 because the Mach auto's have the same trans and HP/TQ numbers. And also has a slightly lower redline/shift point 5800/5900 like our cars.
An 01 cobra engine you can spin to almost 7k stock....
Also anyone here spin these past 6500?
FordNut
12-22-2005, 11:51 AM
I've read both. I'm leaning more towards the Mach 1 because the Mach auto's have the same trans and HP/TQ numbers. And also has a slightly lower redline/shift point 5800/5900 like our cars.
An 01 cobra engine you can spin to almost 7k stock....
Also anyone here spin these past 6500?
Mach 1.
I spun mine up there on the dyno once but with it n/a the power drops off dramatically above 6200 so it's really useless.
SergntMac
12-22-2005, 11:52 AM
Marauder and Mach I with auto trans engines are identical, except for the shaker scoop and intake. Mach I with manual tranny gets an 8 bolt steel forged crank and a 7K redline. I've been up over 6500 RPM, and didn't find much power after that. My power peaks at 6200, so I set my shift points to 6000. I'm happy with the results.
Vortech347
12-22-2005, 12:41 PM
Very cool. Just wanted to confirm this. Thanks guys.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.