need more power

[detroitmercury]

im trying to get about 400 horses out of my of what should i do besides a super charger and intake

[jstevens]

nos should add 100hp

[SergntMac]

Dude...Can't wait to help you out, K?

First...What car are you asking about?

Second...What mods do you have in place now?

Third...Do you want this HP increase full time? Or, just when you need it? Like Barry just asked, are you thinking 400+ at the crank, or, at the back wheels?

Help us out with giving you the right answers. eh?

[Rider90]

i have this friend and we both have 04 marauders so yesterday we raced and its usually a tie well this time his car jumped off the line from the light and left me by about 5 car lengths i was pissed so we raced again same out come so when we get back to my house i pop his hood and what do i see a 04 ford mustang cobra engine he swapped his engine from a rec yard for 1100 dollars plus a new trans man his car really moves now im looking for a engine swap now lol
Ask your friend :rolleyes:

[Marauder2005]

1,100 dollars? I did not think it would be a direct swap. All in all

it must have cost him more then that. Prob. would have been cheaper

to have bought a S/C from one of our venders. Prob. your best option

as well DetroitMerc.

[Blackened300a]

How about you head to the Junk yard and pick up a 04 cobra engine with the tranny for $1100 and then you will be even with your friend who did the swap the first time.

[DEFYANT]

Dont feed the:

http://i5.photobucket.com/albums/y193/Defyant/trolls.jpg

[Bradley G]

A Supercharger and an intake should do that.
Welcome to the collective :P What's your story?

[jimlam56]

Dude...Can't wait to help you out, K?

First...What car are you asking about?

Second...What mods do you have in place now?

Third...Do you want this HP increase full time? Or, just when you need it? Like Barry just asked, are you thinking 400+ at the crank, or, at the back wheels?

Help us out with giving you the right answers. eh?
The benefit of the doubt is wearing thin...

[SergntMac]

You guys have no sense of humor...

[juno]

Well, if you can fit about 8 tornado's in series, you might get close.

[Leadfoot281]

You've got to be carefull with those Tornados! I put two of them in my Escort and snapped the factory 9" rear-end and blew the cylinder heads off.:D

[King Fubar]

Go with the Motorcraft AXG678-8304-9 Muffler bearings and the Titanium Spark Plug gaskets......good for about 150 hp

[RoyLPita]

Go with the Motorcraft AXG678-8304-9 Muffler bearings and the Titanium Spark Plug gaskets......good for about 150 hp

Add super heavy duty headlight fluid for the other 50HP. My ex-girlfriend says that it works.

[jimlam56]

Don't forget the Gonkulator.

[Blackened300a]

Page 52 in the Ford Engine Manual describes a 9 step process on how to adjust the Gafferated Slyrod, I hear its good for another 50 RWHP if you set it to full advance.

BTW, The Muffler bearings are a good idea, They need adjusting every 150 Revs.
Now see how informative we are!

[King Fubar]

I get alot of stuff from here....they're great



kalecoauto (http://www.kalecoauto.com/)

[Blackened300a]

I get alot of stuff from here....they're great



kalecoauto (http://www.kalecoauto.com/)

Thanks!! I got the Wiper blade sharpener,the Left-handed Metric screwdriver and a set of cross-drilled brake lines coming!!!
They are back-ordered on the blinker fluid so Ill have to deal with my slow turn signal for a little while.
You da Man!

[MarauderMark]

Hey since were on the subject , i would like to know where/how can i get twin turbo setup in my Marauder as a direct swap from????:rolleyes:

[Vortech347]

Wow you guys are harsh!

[bigslim]

Glad I didn't start the responses to this thread......:rolleyes:

[RoyLPita]

Make sure that when you do these modifications that you use the Metric/American Crescent wrench. Unfortunately, as of late, it is only available at a few mom and pop auto parts stores in NJ.

[Joe Walsh]

Hey! Don't listen to those wise guys...just do the same thing that I did:
Disconnect your Fratzit Valve. It costs nothing and will yeild a dyno verified 107 HP!

Caution!....As was previously mentioned: DO NOT combine this mod with the Tornado intake....and God forbid you go all out and put on Type 'R' stickers...all bets are Off!

[fastblackmerc]

Go with the Motorcraft AXG678-8304-9 Muffler bearings and the Titanium Spark Plug gaskets......good for about 150 hp
Can't you just lube the stock muffler bearing? Of course you'll have to clean it first with a bucket of steam after you loosen the cover with a left handed monkey wrench......:D

[STLR FN]

What about the Kanuter valve? Wrenchin on it has to yield... what 25hp.