Over Spray On Mm Wheels

[NATEHAWK]

Anyone know of something good to use to get the overspray off....When i went to get my Vic repainted they got overspray on my wheels.. I gotta have both cars shining...Any help would be appreciated

[HwyCruiser]

Claybar should do the trick.

[Marauder2005]

Claybar should do the trick.

Yes this is a good idea. Did the same thing when I had blue flames

painted under my molding. There was clear coat overspray all over the

wheels. Used the Mother clay bar kit, and it did the trick.

[NATEHAWK]

They sell this at the local parts stores?

[Marauder2005]

I got mine at AutoZone

[de minimus]

link to the product below

http://www.meguiars.com/whatsnew/newproductdetail_page.cfm?SKU= G1016

[merc6]

wow good to know :)

[gdmjoe]

NATEHAWK - Anyone know of something good to use to get the overspray off....When i went to get my Vic repainted they got overspray on my wheels.. I gotta have both cars shining...Any help would be appreciated
As long as it hasn't set-up too much (i.e. weeks, months, years, etc.), in the past I've used Liquid Glass (http://www.liquidglass.com/lgpolish.htm).

*Available at (say) CarQuest.

[magindat]

MM wheels are clear-coated.
If it's color paint, you can use laquer thinner. (Don't freak, I've done it)
If it's clear overspray, you have to use a clay bar.
Laquer thinner does not 'melt' clear cuz it's 2-part cured. Color is 1-part in most cases and can be removed with a solvent.
Good luck.
RW

[KillJoy]

I use 0000 Steel Wool on all of the Chrome on my Bike. Perhaps this could work?

KillJoy

[RR|Suki]

I use 0000 Steel Wool on all of the Chrome on my Bike. Perhaps this could work?

KillJoy
wheels have clear coat over them...

[RoyLPita]

I used thinner on my wheels with no problems whatsoever.

[KillJoy]

wheels have clear coat over them...

Then you probably wouldn't want to Steel Wool them!:down:

KillJoy

[DeadVic]

I've also used Mequire's Step 1 (Body Scrub) to get overspray off.