410 gears (question)

[William B]

I ordered 410's to replace the 255's. Will i see a noticable performance increase from 0-60 and 0-100? Right now my time for 0-60 is 4.88

Thanks

[Rider90]

I noticed a big seat of the pants difference, never plugged any numbers, but I knew I made the right move by doing the swap.

[William B]

thanks for the feed-back.....appreciate it
Have a good one..

[gonzo50]

I ordered 410's to replace the 255's. Will i see a noticable performance increase from 0-60 and 0-100? Right now my time for 0-60 is 4.88Thanks
I know you mean 3.55's because with 2.55's it would be like driving with the anchor down.:bigcry:

Are you Supercharged, because your 0-60 times are super fast for stock.:confused:

[Rider90]

I know you mean 3.55's because with 2.55's it would be like driving with the anchor down.:bigcry:

Are you Supercharged, because your 0-60 times are super fast for stock.:confused:

See: http://www.mercurymarauder.net/forums/showthread.php?t=16219

[gonzo50]

Thanks Rider90.:rolleyes:

[Rider90]

Thanks Rider90.:rolleyes:
Anytime gonzo50.:rolleyes:

[William B]

SC trilogy, delta exhaust, ordered air induction on tuesday...410's should work well

[Marauder2005]

SC trilogy, delta exhaust, ordered air induction on tuesday...410's should work well


Indeed! :D

[RF Overlord]

410's should work wellYes. Yes they will. :D

[fastblackmerc]

Other that a "tune", installing the 4.10's was the best mod I've done to my MM

[TripleTransAm]

I know you mean 3.55's because with 2.55's it would be like driving with the anchor down.:bigcry:


LOL, true.
2.56s in my '78 Trans Am, those 325 lb-ft at 1600 RPM have a lot of work in front of them on a hard launch (stall speed is around 1600 RPM too, if I recall).

[William B]

and then??

[QWK SVT]

and then??

http://painfullycool.com/uploads/72/318/andthennoandthen.wav

Sorry, I couldn't resist...

I noticed a big improvement, on my near-stock MM... I'm sure you'll have even bigger traction problems, soon :burnout: