View Full Version : Steering Column Pod
DEFYANT
01-24-2006, 10:44 PM
Does anyone know the part number for the steering column guage pod for the F150 that fits our cars?
The below thread I found during a search, but does not have a part number.
http://www.mercurymarauder.net/forums/showthread.php?t=3073&highlight=f150+guage
This is a link to Summit Racing, but the part shown is for an automatic F150.
http://store.summitracing.com/default.asp?target=esearch.asp&N=110&Ntk=KeywordSearch&Ntt=marauder
Rider90
01-24-2006, 10:51 PM
It doesn't fit. Wes did some experimenting for me. The one for the CV will work, but it has a column shifter hole. The one for the Super Duty will not work because our column has a "Step-Off" in the back that would be left open with that pod. I am not aware of one for the F-150, but would be interested in the results.
DEFYANT
01-25-2006, 07:37 AM
:bump:
anyone?
gdmjoe
01-25-2006, 08:31 AM
AutoMeter part# 15005 (http://hp.autometer.com/products/mounting_solutions/steering_col_truck/steering_col_truck.html) - Ford F-150 97-01 (manual)
BruteForce
01-25-2006, 08:44 AM
I have this on my MM (AF meter gauge). Summit Racing part #ATM-15011 29.95.
Rider90
01-25-2006, 08:46 AM
You have the F-150 pod or the Super Duty pod? Pics?
BruteForce
01-25-2006, 08:47 AM
I have the pod who's part number I posted. :D It is the same part gdmjoe posted, just a retailer's internal part number.
DEFYANT
01-25-2006, 09:09 AM
Thanks guys!!
Rider90
01-25-2006, 09:10 AM
Bruteforce will get some pictures later
:::Eagerly Waiting::: :D
BruteForce
01-25-2006, 09:38 AM
Pics as promised. Click da pic to enlarge.
http://www.mercurymarauder.net/showcase/files/1/7/1/3/column_gauge_pod_thumb.jpg (http://www.mercurymarauder.net/showcase/showimage.php?i=1211&c=3&userid=1713)
http://www.mercurymarauder.net/showcase/files/1/7/1/3/column_gauge_pod2_thumb.jpg (http://www.mercurymarauder.net/showcase/showimage.php?i=1212&c=3&userid=1713)
And one of the matching console gauge cluster
http://www.mercurymarauder.net/showcase/files/1/7/1/3/console_gauges_thumb.jpg (http://www.mercurymarauder.net/showcase/showimage.php?i=1210&c=3&userid=1713)
Rider90
01-25-2006, 09:40 AM
Thanks a lot! Good lookin setup!
snowbird
01-25-2006, 11:00 AM
:bump:
anyone?
Defyant,
Last summer, i did modify a Mustang pod to fit. Like another poster said, there's a difference in the shape of the 2 steering columns so i had to cut and fill quite a bit to fit. The above picture are not so clear because at that time, i had only a 35mm camera that i later scanned for Internet duty.
Anyway, the last picture show the pod at primer finish, ready for install and deposited on the column to have an idea.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.