TooManyFords
01-31-2006, 06:42 AM
I'm fabbing up something "custom" and am down to replacing the upper intake. I'm looking for a custom throttle body that has provisions for the AIC and TPS. This should ideally be able to connect to a custom "tube" [we'll call it a tube for now] made from aluminum that hopefully will be round with a square flange and 4 bolts to attach to this tube.
I'd like it to be self-contained in that it has all the idle circuits and tps ports so that I can position it 'somewhere' over the drivers side valve cover in 'approximately' the same position as the current one so I can reuse the current throttle cables. If I need to change cables, that is ok too and I'll rig up an adapter.
Suggestions welcome!
John
I'd like it to be self-contained in that it has all the idle circuits and tps ports so that I can position it 'somewhere' over the drivers side valve cover in 'approximately' the same position as the current one so I can reuse the current throttle cables. If I need to change cables, that is ok too and I'll rig up an adapter.
Suggestions welcome!
John