Sequential Tail Lights Installed....Sweet!

[MI2QWK4U]

I recieved my WebElectric Sequential Tail Light Kit today on the 06 Mustang GT. Very easy to do, it is basically a stock wiring harness modified to sequence the brake/turn lights. Instructions were easy to read, and went very well. You need to loosen 3 retaining nuts to release the whole tailight assembly, remove the old harness, put the bulbs in the new harness, reinstall and you are done. 45 minute job, but the results are stunning. Even my wife spoke up and thought it looks sweet...go figure. Some kits you have to modify your old harness, but not with this company, its plug and play. I emailed him for his suggestions for doing the simplest plug and play setup for the Marauder. I am going to order a kit for the Mach 1 too. Simple mods...gotta love em!

http://www.webelectricproducts.com/sts/mustang/05/m05seq.gif

[STLR FN]

Good mod Dave. I always did like the 94 and newer Stangs with the sequential tail lights.

[martyo]

I told you I love those. But if I recall correctly, you made fun of me when I suggested them. :confused:

[MI2QWK4U]

I told you I love those. But if I recall correctly, you made fun of me when I suggested them. :confused:

Wasn't me. You can get a set when you buy a 06 or newer Mustang. I will get a set for the Mach 1 too.

[Marauder8]

I recieved my WebElectric Sequential Tail Light Kit today on the 06 Mustang GT. Very easy to do, it is basically a stock wiring harness modified to sequence the brake/turn lights. Instructions were easy to read, and went very well. You need to loosen 3 retaining nuts to release the whole tailight assembly, remove the old harness, put the bulbs in the new harness, reinstall and you are done. 45 minute job, but the results are stunning. Even my wife spoke up and thought it looks sweet...go figure. Some kits you have to modify your old harness, but not with this company, its plug and play. I emailed him for his suggestions for doing the simplest plug and play setup for the Marauder. I am going to order a kit for the Mach 1 too. Simple mods...gotta love em!

http://www.webelectricproducts.com/sts/mustang/05/m05seq.gif
Where did you get the kit? I have an 05 GT.

[MI2QWK4U]

Where did you get the kit? I have an 05 GT.


http://www.webelectricproducts.com/products.htm

[Logan]

They've been on mine for a couple weeks, I like em...

[Donny Carlson]

Some kits you have to modify your old harness, but not with this company, its plug and play. I emailed him for his suggestions for doing the simplest plug and play setup for the Marauder.

This same company makes a sequential kit for the Crown Vic.

[Petrograde]

This same company makes a sequential kit for the Crown Vic.

so,.. do they work in our Marauders?

...I'd think so?

[Donny Carlson]

so,.. do they work in our Marauders?

...I'd think so?

If you click on the link ^^ up there and look for Crown Vic, you'll see that it only requires two light bulb tail lights to work. Yup, the Marauder should work.

[MI2QWK4U]

They make a do it yourself splice in kit for generic 2 lamp setups, nothing specific for the Crown Vic. Nothing plug and play like Logan and I got for the New Mustangs. Personally it doesnt look as good on the Crown Vic/Marauder as it does on the Mustang.
http://www.webelectricproducts.com/sts/sts2/cvseqs.gif
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=85 72&d=1139114893

[03MERCMARAUDER]

Looks good, Looks like I found another thing I need to buy for the stang. Want to get all this stuff so it can go on the day it arrives. Jow about some pics of them in your car, or a vid.

Joe

[MI2QWK4U]

Looks good, Looks like I found another thing I need to buy for the stang. Want to get all this stuff so it can go on the day it arrives. Jow about some pics of them in your car, or a vid.

Joe


They are a simple must do mod for the Mustang, not super flashy, but very subtle, and from what I have seen so far, car guys notice.