PDA

View Full Version : Mmds


Dennis Reinhart
02-15-2006, 11:13 AM
We got a new order of Metal Matrix Drive Shafts, in today and are offering free shipping, and we have one intake spacer.
Cobra25
02-15-2006, 12:32 PM
Hello Dennis, I hope your showing up for our picnic this sunday at Markham park. So far 37 Marauders and about 97 People are going.
Dennis Reinhart
02-15-2006, 12:38 PM
Thanks Zoltan, but we are really tied up we have several project cars going, hopefully we can do this next year, it is a 4 hour drive one way so we would have to come up and stay over, and right now we are busy. I did enjoy this the last time we attended.
Cobra25
02-15-2006, 12:42 PM
Your always welcome to join us anytime Dennis.
hitchhiker
02-15-2006, 02:14 PM
We got a new order of Metal Matrix Drive Shafts, in today and are offering free shipping, and we have one intake spacer.

What would an intake spacer do for performance?

Thanks,

Dave

:D
Petrograde
02-15-2006, 03:42 PM
What would an intake spacer do for performance?

Thanks,

Dave

:D

Dave,
they say it adds around 10 HP,... I dunno what the exact numbers are,.. but, I felt a nice little increase with my 'seat-o-the-pants-o'meter'! :P
Rider90
02-15-2006, 04:13 PM
Dave,
they say it adds around 10 HP,... I dunno what the exact numbers are,.. but, I felt a nice little increase with my 'seat-o-the-pants-o'meter'! :P
I second this.
Dragcity
02-15-2006, 06:24 PM
Hi Dennis,

Still have a Pro-Guard taking up space in your inventory.? I PM'd you a week or so ago. I will take one if you have it...
Big House
02-15-2006, 10:11 PM
Waht does the spacer do for a NA car?
Petrograde
02-16-2006, 04:00 AM
see my post above,.... my MM is N/A.
Big House
02-16-2006, 11:13 AM
see my post above,.... my MM is N/A.

How hard is the install?
BruteForce
02-16-2006, 11:39 AM
How hard is the install?

About 10 minutes. Helps if you have an extra set of hands to hold the upper intake up while you place the spacer.
Dragcity
02-16-2006, 12:30 PM
Anybody have pictures of the spacer ? I am interested to know if it clears the hood liner after install.

Does it come with gaskets?

I was hoping for an eight inch spacer with Ethelene Glycol jacket and cooling fins around it. !!!
O's Fan Rich
02-16-2006, 12:53 PM
I have it installed, clearance is not an issue. It's only1/4 inch or so thick.

http://secure-order-area.net/paulshp/cgi-bin/webstorecgi/webstore.cgi?page=Marauder&type=categories
Since this is Dennis's thread, order it from him!!!
Blackened300a
03-04-2006, 06:17 PM
How hard is the install?

Its not hard to install at all, Wait til the engine is Cold
Then unbolt the bolts around the lid and the 2 bolts that hold on the EGR. Lift the lid, Slide the spacer on top of the OEM gasket and carefully torque the bolts down to I believe 12 ft lbs but Dont quote me on that.
Spray a little starting fluid around the lid to make sure you arent sucking in any air and you are good to go,

I had a mixed reaction to my install. I dont think it did much for me until I had my car tuned. Then it put out what seems to be about 10 RWHP