I need a custom part... Anyone?

[TooManyFords]

For my monster build-up, I need a custom coolant crossover tube between the two heads. It can look exactly like the factory one but I need it to not stick out forward any farther than the current serpentine pulley system. Ideally it should also be BELOW the level of the upper/lower intake line.

If anyone wants to tackle this custom tube, please speak up!

Thanks

John

[TooManyFords]

Also, if anyone has access to the different types of tubes used by different 4.6 motors and one of them would work for me, let me know!

Thanks

John

[TooManyFords]

:bump:

Ok, not finding a custom one, does anyone have an old original water crossover tube that goes between the heads? You know, the one with the coolant fill cap. If you have a spare one just taking up space and want to contribute to the custom S/C kit, now's your chance!

PM me if you have one and I'll give you my address.

Thanks in advance!

john

[RoyLPita]

:bump:

Ok, not finding a custom one, does anyone have an old original water crossover tube that goes between the heads? You know, the one with the coolant fill cap. If you have a spare one just taking up space and want to contribute to the custom S/C kit, now's your chance!

PM me if you have one and I'll give you my address.

Thanks in advance!

john

Talk to anyone here who has installed a Trilogy kit. Hope this helps.