PDA

View Full Version : radar detector hard wiring



darebren
04-21-2003, 10:08 AM
anyone found a good 12V switched wire that the radar detector can splice into? Please let me know which wire,what color and where as to help me hard wire a detector. thanks alot for the time saving advice

WolfeBros
04-21-2003, 12:58 PM
There is a red wire with a yellow stripe that goes to both the oil pressure gauge and voltmeter. I would tap off of there. A radar detector does not draw much current so you will be ok. I would make sure and use the in line fuse that comes in the radar detectors hot wire. My standard warning applies here: Remember you are modding a car under warranty. Use care and caution and know what you are doing. Screw up a wiring harness and you will be screwed. They will reject any electrical warranty claim they can and pin it back on you.

mensrea
04-21-2003, 01:29 PM
I had my audio dealer hard wire the radar detector in, cost me 20 bucks and I love it... not to mention that it's now mounted up nice ahd high, out of the line of sight of any LEO that happen to be behind me.