PDA

View Full Version : FIT #3 Kit for sale...



TooManyFords
03-12-2006, 09:16 PM
As many of you have read here, last October I had the unfortunate experience of grenading my block in Wisconsin. The good news is that I have it up and running and couldn't be happier. During the down-time while having a block built by Modular Mustang Racing, I decided to go a different route, the beat of my own drum if you will.

To that end, my new blower will be here by the end of the month and the reality is, that I will sell Kit #3 here. This is the fully polished P-1SC with everything except the in-tank fuel pump and the tune. I've already spoken with Greg and he has everything you need to complete this kit for installation.

This is the exact same kit that Tom (MarauderTJA) has on his car. With the Diablo tune from Scott, you really can't go wrong. Options from Greg include the larger stock pulley to bring the boost down to the default 8-9 psi if you choose. Mine comes with the 12psi pulley.

If you are interested or have any questions, please let me or Greg know.

Cheers!

john

TooManyFords
03-12-2006, 09:19 PM
Oops! Forgot to mention price...

$4000 OBO is what I'm looking for.

Thanks

John

Hotrauder
03-12-2006, 09:27 PM
Good luck John. Dennis:beer:

MarauderMarc
03-13-2006, 01:40 AM
With a sale of 4495, I think you need to lower it a bit. 3500?

Breadfan
03-13-2006, 05:38 AM
Well if it makes a difference his is polished - that adds to the cost

TooManyFords
03-13-2006, 06:23 AM
... And the smaller pulley for more boost, and I think I got another upgrade in there as well. But like I said, it is OBO.

Cheers!

john

TooManyFords
03-13-2006, 06:24 AM
With a sale of 4495, I think you need to lower it a bit. 3500?

Is this an "offer"?

snowbird
03-13-2006, 08:56 AM
.....

To that end, my new blower will be here by the end of the month ....

john
John,

If i can ask, what will be the new blower model ?

TooManyFords
03-13-2006, 09:01 AM
I am building my own "kit" using a polished GMC 6-71 with a pair of 1000 cfm four-barrel throttle bodies on top and the big 3.5" Gilmer belt drive in front.

Cheers!

John

Rider90
03-13-2006, 09:39 AM
I am building my own "kit" using a polished GMC 6-71 with a pair of 1000 cfm four-barrel throttle bodies on top and the big 3.5" Gilmer belt drive in front.

Cheers!

John
How dare you tease without pictures :P

MarauderMark
03-13-2006, 09:42 AM
How dare you tease without pictures :P
Ahh Yea i wanna see.:coolman:

TooManyFords
03-13-2006, 09:44 AM
I'll start a new thread when the parts begin. This thread is about selling an awesome ProCharger kit from F.I.T.! I've got about 140 miles on the new motor with this on it and it is running sweet, absolutely flawless.

I've only got about 10,000 miles on this unit and I just gave it the third oil change (every 5000 instead of the standard 6000).

I must be getting better at it because it only took me about 2 hours to get everything in place. This really is an easy kit to install too.

Cheers!

john

TooManyFords
03-13-2006, 09:45 AM
Geez guys, my Avatar is the blower case!

DEFYANT
03-13-2006, 09:50 AM
Geez guys, my Avatar is the blower case!

I knew dat!

Will you retain the 4.6 DOHC and will you..... ah, nevamind. I can wait.

TooManyFords
03-13-2006, 11:05 AM
Pending PayPal, it is SOLD!

I would like to thank everyone for playing. We have some lovely parting gifts.

Greg, you will be contacted privately.

Again, thanks everyone!

John

MarauderTJA
03-13-2006, 11:24 AM
I am building my own "kit" using a polished GMC 6-71 with a pair of 1000 cfm four-barrel throttle bodies on top and the big 3.5" Gilmer belt drive in front.

Cheers!

John

You know there is a point of being Sick with blowers:rolleyes:

Man oh man John.....Can't wait to see how this monster looks in your engine bay....as well as your hood change...Best of luck my friend..

maraudernkc
03-13-2006, 11:53 AM
Going, gone!!!!!!!!!

John, can you come sell for me?

TooManyFords
03-13-2006, 12:22 PM
Greg, make me an offer!

Tom, you can never too SICK with a big assed blower. You let me if you do, ok?

wheeeeeeeeeeeeeee, Buh-WAAAAAAAAAAAAAAAAAH!

Everyone else, the links to the rebuild and new blower setup ARE HERE (http://john.frieltek.com/toomanyfords/marauder/engine2006).

Cheers!

John

HwyCruiser
03-13-2006, 04:30 PM
Holy smokes, that went quick. I hope the new owner of kit #3 finds it as enjoyable as I do. ;)

DL04
03-13-2006, 04:34 PM
Sure did go quick,I should of made an offer when I got home from work this morning,just woke up and its gone-you snooze you lose. I guess I'll just have to win the raffle!

snowbird
03-13-2006, 08:33 PM
Pending PayPal, it is SOLD!

I would like to thank everyone for playing. We have some lovely parting gifts.

Greg, you will be contacted privately.

Again, thanks everyone!

John


Hey Congrats on your quick sale and your new wild wild project ! The buyer will be happy. The Fit is very easy to install and very effective.

With that big thing sticking out of the hood, you might want to look at those big school bus convex mirrors .... :) you know, for parking !

HwyCruiser
03-13-2006, 09:39 PM
Whoever purchased John's kit with the 3.60" / 12 psi pulley, don't feel like it would be a bad idea to try a bigger pulley first off to see if it's enough for you. Just get with Greg and he'll hook you up.

With a 3.80" pulley and a chin-mounted intercooler I'm seeing 8-9 psi at 6000 rpm, and along with the other mods my car has it definately puts me back into my seat. I've heard that the P1-SC's sweet spot is around 10 psi anyway, and a 3.70" pulley will get you right in it.