PDA

View Full Version : Pics Please ASAP


STLR FN
03-13-2006, 09:48 AM
Does someone have pics of the '99-'01 & '03/'04 Cobra manifolds? I'm working on a lead to get a set dirt cheap.
Warpath
03-14-2006, 05:40 PM
You shouldn't have too much of a problem finding some on the mustang boards. www.corral.net is the one I go to most.
Warpath
03-14-2006, 05:43 PM
BTW, make sure that you ask whether the 99 intake is a "fixed" intake. The 99s were recalled for low power and part of the recall was replacing the intake with a less restrictive intake. The first ones were extrude honed. The later ones were "acid core" or something to that effect. The acid core thingy made the walls smoother.
STLR FN
03-14-2006, 06:18 PM
Should've been more specific, I need pics of Exhaust Manifolds. Particularly those of the '03/'04 years.

Thanks
Warpath
03-15-2006, 09:55 AM
Oh. Why would you want those? Aftermarket one are better.
KillJoy
03-15-2006, 10:14 AM
Oh. Why would you want those? Aftermarket one are better.

They are Manifolds that some use for aftermarket MM exhausts.

KillJoy
O's Fan Rich
03-15-2006, 10:18 AM
Does someone have pics of the '99-'01 & '03/'04 Cobra manifolds? I'm working on a lead to get a set dirt cheap.
I tried to take some before I put them on, but my digital camera died!
Sorry..
O's Fan Rich
03-15-2006, 10:30 AM
Does someone have pics of the '99-'01 & '03/'04 Cobra manifolds? I'm working on a lead to get a set dirt cheap.
You know what? I'll swipe #2 son's camera and head up to the shop... I'll get shots of them on the car though, and some of the stockers off the car if that helps?
O's Fan Rich
03-15-2006, 01:08 PM
Does someone have pics of the '99-'01 & '03/'04 Cobra manifolds? I'm working on a lead to get a set dirt cheap.
Ok here's what I got...
O's Fan Rich
03-15-2006, 01:09 PM
and a couple more
Let me know when you're done so I can delete them.
STLR FN
03-15-2006, 01:34 PM
Thanks Rich. These are what I won for $41. They don't look like yours.

http://i1.ebayimg.com/01/i/06/71/ec/b4_1.JPG

http://i3.ebayimg.com/01/i/06/77/17/57_1.JPG
O's Fan Rich
03-15-2006, 01:42 PM
Thanks Rich. These are what I won for $41. They don't look like yours.

http://i1.ebayimg.com/01/i/06/71/ec/b4_1.JPG

http://i3.ebayimg.com/01/i/06/77/17/57_1.JPG
Heck, for all I know you's are right and mine are wrong!!
I bought mine from a guy in Jersey off the modular ford forum. 04 Cobra... so he says.
rayjay
03-15-2006, 01:45 PM
Thanks Rich. These are what I won for $41. They don't look like yours.

http://i1.ebayimg.com/01/i/06/71/ec/b4_1.JPG

http://i3.ebayimg.com/01/i/06/77/17/57_1.JPG

Those are the manifolds used in the DR Cobra Exhaust. Clean those up, send them off to JetHot and you're good to go.
RoyLPita
03-15-2006, 01:51 PM
These look like Mach One manifolds. Same??
O's Fan Rich
03-15-2006, 01:56 PM
The ones I have off the car shots of are thestockers, so if that's what your comparing them to, they should be different!

Here is a pic of the drivers side on the car. I miss labeled it as the pass side...

And I'll add the pass side from underneath as best as I could get it
STLR FN
03-15-2006, 02:01 PM
Heck, for all I know you's are right and mine are wrong!!
I bought mine from a guy in Jersey off the modular ford forum. 04 Cobra... so he says. Mine says they're from an '03 Cobra. They look a lot like my truck manifolds. I'll look for a part number when they get here and go from there. Worst case i throw them back up on e-bay. Yours look more like FRPP headers.
O's Fan Rich
03-15-2006, 02:03 PM
Mine says they're from an '03 Cobra. They look a lot like my truck manifolds. I'll look for a part number when they get here and go from there. Worst case i throw them back up on e-bay. Yours look more like FRPP headers.
Check my new pics... you may be cool.
I wish I'd have been able to snag some shots while both sets were off the car!
STLR FN
03-15-2006, 02:22 PM
Roy don't know we'll see.
Rich and Rayjay if younz are correct and these are actually the one's used in DR's exhaust kit. Wooohooo 41 bucks for a pair of $270 manifolds. :D
rayjay
03-15-2006, 02:27 PM
Roy don't know we'll see.
Rich and Rayjay if younz are correct and these are actually the one's used in DR's exhaust kit. Wooohooo 41 bucks for a pair of $270 manifolds. :D

Those are it, in the "raw".
STLR FN
03-15-2006, 02:31 PM
Thanks rayjay.

And yes I'm up to no good. :D

Got confirmation from the seller that hey are indeed from an '03 Cobra. He took em off a wrecked Cobra and is putting long tubes on his motor.
KillJoy
03-15-2006, 02:43 PM
Roy don't know we'll see.
Rich and Rayjay if younz are correct and these are actually the one's used in DR's exhaust kit. Wooohooo 41 bucks for a pair of $270 manifolds. :D

I believe DR's come coated, and that the EGR Tube has been modified in some way. That explains the additional cost.

I do not own DRs setup, so I am speaking only from hear-say. The above could be completely incorrect.:cool:

KillJoy
STLR FN
03-15-2006, 02:45 PM
I believe DR's come coated, and that the EGR Tube has been modified in some way. That explains the additional cost.

I do not own DRs setup, so I am speaking only from hear-say. The above could be completely incorrect.:cool:

KillJoy

Yeah DR's are ceramic coated and yes the EGR tube has to be extended 4" but some have said that Ford sells the longer EGR tube. I just need to get a part number.