PDA

View Full Version : VA, MD, or DC machine shop....


Big House
03-16-2006, 07:41 PM
Help!!!! The beautiful wheels I just bought don't fit. Problem...the center bore is to small. I need to know the name and location of a machine shop that cam measure and bore out the center of these beauties. Any help would greatly be appreciated.

House
Joe Walsh
03-16-2006, 09:25 PM
William,
You might want to call these guys...they straighten, weld, machine and repair aluminum rims.
I've seen their work and it is good.
They should be able to 'open up' the center hole.

Ye Olde Wheel and Welding Shop
Elkridge, Md.
(410) 796-8400
BAD MERC
03-16-2006, 09:33 PM
I would bet that almost any machine shop can make your wheels hubcentric. That is a pretty small undertaking when compared to some of the other things done in a shop.
ctrlraven
03-17-2006, 10:06 AM
William,
You might want to call these guys...they straighten, weld, machine and repair aluminum rims.
I've seen their work and it is good.
They should be able to 'open up' the center hole.

Ye Olde Wheel and Welding Shop
Elkridge, Md.
(410) 796-8400 Yeah they are a good shop, their right up the street from my shop. If I ever needed wheel repair I would go to these guys.