PDA

View Full Version : Pan Gasket



TheDonk
04-02-2006, 02:29 AM
For those of you that have dropped the pan, have you replaced the
gasket or been able to reuse the old one?
Mike

grampaws
04-02-2006, 02:58 AM
Rule is always change gaskets...
the rubber style gaskets can be re-used
and in most instances you will not have
a problem...:)

RF Overlord
04-02-2006, 04:36 AM
The transmission pan gasket on the 4R70W is designed to be re-useable...it even says so right on the pan itself. It should be good for at least a half-dozen uses...

TheDonk
04-02-2006, 04:49 AM
Thanks so much for the replies.

Krytin
04-02-2006, 06:10 PM
The transmission pan gasket on the 4R70W is designed to be re-useable...it even says so right on the pan itself. It should be good for at least a half-dozen uses...
I've reused mine four times now - the last time when I installed the B&M cast aluminum pan. No leaks, no runs, no errors!