Summer Specials

[Dennis Reinhart]

Summer is here so we thought we would offer a summer special for the club.

Here is what I would like to do for the club on the Xcal 2

I will offer a 100.00 trade in with your old Xcal 1 and 75.00 for the Blue 9100.
Xcal 2 are 379.95 with USB cable *
Pro Racer Package software with user manual are 350.00 *
Innovative wide band 02 package are 200.00 *

This is the best package money can buy with this set up you can tune your own car.

Addco front and rear Sway bars are 160.00 each PS
Precision Ind 3000 Stall converters are 715.00 PS
Pro Guards are 50.00 *
Ford Motorsports 410 gears 225.00 PS
Denso Iridium spark plugs 85.00 *
Motorcraft AGSF22C spark plugs 30.00 *
180 degree thermostats 13.00 *
Mezirie water pumps 335.00 PS
Metco control arms 439.95 *
PHP control arms 375.00 *
Autometer oil pressure gauges 60.00 *
Autometer Pillar post dual pods 40.00 *
Autometer Fuel pressure Gauges 250.00*
Dynotech MMDS 500.00 *
EBC brake kits 800.00 PS
KVR stainless steel brake lines 195.00 *
KVR 14" brake kits 1595.00 PS
Steeda Underdive Pulleys 225.00 PS
Art Car level 2 transmission kits 450.00 PS
Vortech air to air SC kits 4595.00 PS
Escort Radar detectors call for pricing.

*FREE SHIPPING*

[GarageMahal]

I do believe this is going to cost me some money.... Thanks Dennis :)

How much is yet to be determined ;)

jta

[magindat]

There goes my next bonus...

You got layaway? J/K!

[DEFYANT]

Well, there he goes again, tryin to get what little money I got left outta my wallet!

You got me last time Dennis, this time the modifier in me is on vacation. I'm broke.

Whats for free?

[SergntMac]

Awesome prices, thanks Dennis!

[Blackened300a]

Any chance of the Cobra Exhaust dropping in price anytime soon?? Or Perhaps the Kooks set-up??

[SergntMac]

Any chance of the Cobra Exhaust dropping in price anytime soon?? Or Perhaps the Kooks set-up?? In the past, higher end stuff sells better in a "ten or more" group buy. If you're ready to raise your hand on either system, go for it?

[MarauderMark]

Will be getting in touch for KVR stainless steel brake lines ..yep:up:

[Blackened300a]

In the past, higher end stuff sells better in a "ten or more" group buy. If you're ready to raise your hand on either system, go for it?

You have no idea how bad I want too. I think I have to toss my extended warranty out if I go with the long tubes but I wonder if I would skate with the cobra set-up.
Anyone have the Dyno figures of the Cobra set-up handy??

[SergntMac]

You have no idea how bad I want too. I think I have to toss my extended warranty out if I go with the long tubes but I wonder if I would skate with the cobra set-up. Anyone have the Dyno figures of the Cobra set-up handy?? I got 30 RWHP/30 RWTQ from adding the DR Cobra kit, along with using OEM tail pipes and "resonator delete" tips from Wes Chain. I don't think DR sells any long tube headers, but he sells the Cobra kit and Kook's "mid length" header kits.

[Hotrauder]

Will be getting in touch for KVR stainless steel brake lines ..yep:up:

Order them now... I ordered and was charged on my credit card on 2/24-06 it is now 10PM on 4/19-06 and still no lines. My last chance to get my brake fluid changed for this weekend at Sebring is tomorrow morning at 8am. Needless to say I am less than a happy camper. Dennis:(

[MarauderMark]

Order them now... I ordered and was charged on my credit card on 2/24-06 it is now 10PM on 4/19-06 and still no lines. My last chance to get my brake fluid changed for this weekend at Sebring is tomorrow morning at 8am. Needless to say I am less than a happy camper. Dennis:(
Call him 904-276-5003:up:

[Blackened300a]

I got 30 RWHP/30 RWTQ from adding the DR Cobra kit, along with using OEM tail pipes and "resonator delete" tips from Wes Chain. I don't think DR sells any long tube headers, but he sells the Cobra kit and Kook's "mid length" header kits.

That 30 HP puts me in the 300HP club and probably a happy camper since its cheaper then the $1800 for the Kooks set-up.
Thanks!!

[HwyCruiser]

Dennis, which Innovative wideband package is that?

[HookedOnCV]

Dennis, which Innovative wideband package is that?

I am guessing that is for the LC-1?
...from Innovate Motorsports website...LC-1 Lambda Cable (Standalone Wideband Controller) with 02 Sensor - P/N: 3769

*Bosch Wideband Sensor Included*

The LC-1 is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1, and includes digital input, output, and 2 programmable analog outputs.

Dennis, please correct me if this isn't it, but that is about the going rate for this item.

Do you have access to the cable that plugs into the XCal2 to bring in the analog 0-5vdc signal from the LC-1 so the A/F can be datalogged? If so, how much more for that? Then its really worth it to help in tuning and verifying your A/F under WOT conditions.

Todd

[Dennis Reinhart]

I am guessing that is for the LC-1?

Dennis, please correct me if this isn't it, but that is about the going rate for this item.

Do you have access to the cable that plugs into the XCal2 to bring in the analog 0-5vdc signal from the LC-1 so the A/F can be datalogged? If so, how much more for that? Then its really worth it to help in tuning and verifying your A/F under WOT conditions.

Todd

It is the LC1 and the cable is frr that you need to conect to the Xcal 2

[GarageMahal]

I do believe this is going to cost me some money.... Thanks Dennis :)

How much is yet to be determined ;)

jta


I just placed my (long overdue) order for the Pro Guard, new plugs, and a working oil pressure guage. Thanks again for taking care of us Dennis!

jta

[Blackened300a]

Hey Dennis
Are the Summer specials still going on??
If so, Expect a phone call from me tomorrow, or a cerdit card order tonight for a 3000 stall TC, Im making the plunge

[Dennis Reinhart]

Hey Dennis
Are the Summer specials still going on??
If so, Expect a phone call from me tomorrow, or a cerdit card order tonight for a 3000 stall TC, Im making the plunge

Yep still going call Jackie tomorrow

[Marauder.45]

Hey Dennis
Are the Summer specials still going on??
If so, Expect a phone call from me tomorrow, or a cerdit card order tonight for a 3000 stall TC, Im making the plunge

Well it's about time.:beer:

Go 3500, I think Dennis will reccommend the same.

I am super happy with the 3500 he sent me.

[Hotrauder]

Do you have a price for Dual Mode mufflers? thanks dennis

[Blackened300a]

Well it's about time.:beer:

Go 3500, I think Dennis will reccommend the same.

I am super happy with the 3500 he sent me.

Yeah then its more $$ for a tranny cooler. My car is a daily driver so I think the 3000 will be best for my needs.

[Dennis Reinhart]

We just recieved three sets of Ford Motorsport 4:10 gears and one set of Metco controll arms, we should have 10 more proguards this week.

[Dennis Reinhart]

Summer is here so we thought we would offer a summer special for the club.

Here is what I would like to do for the club on the Xcal 2

I will offer a 100.00 trade in with your old Xcal 1 and 75.00 for the Blue 9100.
Xcal 2 are 379.95 with USB cable *
Pro Racer Package software with user manual are 350.00 *
Innovative wide band 02 package are 200.00 *

This is the best package money can buy with this set up you can tune your own car.

Addco front and rear Sway bars are 160.00 each PS
Precision Ind 3000 Stall converters are 715.00 PS
Pro Guards are 50.00 *
Ford Motorsports 410 gears 225.00 PS
Denso Iridium spark plugs 85.00 *
Motorcraft AGSF22C spark plugs 30.00 *
180 degree thermostats 13.00 *
Mezirie water pumps 335.00 PS
Metco control arms 439.95 *
PHP control arms 375.00 *
Autometer oil pressure gauges 60.00 *
Autometer Pillar post dual pods 40.00 *
Autometer Fuel pressure Gauges 250.00*
Dynotech MMDS 500.00 *
EBC brake kits 800.00 PS
KVR stainless steel brake lines 195.00 *
KVR 14" brake kits 1595.00 PS
Steeda Underdive Pulleys 225.00 PS
Art Car level 2 transmission kits 450.00 PS
Vortech air to air SC kits 4595.00 PS
Escort Radar detectors call for pricing.

*FREE SHIPPING*

I want to thank every one for there orders, we will continue the sale till Saturday. I will honor internet orders placed till Tuesday, this is a great deal to save on parts and shipping, I want to wish all of you a safe and happy Memorial day weekend.

[00 Aggie]

Are the denso's pre-gapped?

[Dennis Reinhart]

Are the denso's pre-gapped?


Yes they are

[00 Aggie]

Thanks! I'll call tomorrow for some densos, pro guard, and addcos!

[ctrlraven]

Mr. Reinhart any chance I can order a summer special Xcal2 still? Had to wait till I got paid again, had to fork out money for new rear tires the other week ago when I was orginally planning on ordering a Xcal2 unit. Let me know and I will gladly place my order today because I need to correct my speedo (235/50 all around now).

Chris

[Dennis Reinhart]

Mr. Reinhart any chance I can order a summer special Xcal2 still? Had to wait till I got paid again, had to fork out money for new rear tires the other week ago when I was orginally planning on ordering a Xcal2 unit. Let me know and I will gladly place my order today because I need to correct my speedo (235/50 all around now).

Chris

Give Jackie a call

[ctrlraven]

Give Jackie a call Thanks DR! Just got off the phone with Jackie and placed the order for the Xcal 2 unit.

Chris

[hbarrett]

I ordered the rear sway bar and it has arrived OK. I was too late for the Summer special, but close enough anyway. Now I just need to make the time to get it installed. Thank you Dennis.[quote=Dennis Reinhart]Summer is here so we thought we would offer a summer special for the club.

[natedog1284]

I ordered the rear sway bar and it has arrived OK. I was too late for the Summer special, but close enough anyway. Now I just need to make the time to get it installed. Thank you Dennis

When did it end? I would've ordered sooner had I known....oh well. :depress:

[KillJoy]

Sway Bars and Rear Control Arms take about an hour each. All 3 took me about 3.5 Hrs w/ a lunch, and going slowly.

KillJoy

[hbarrett]

I'm sure that it will take me longer!
Sway Bars and Rear Control Arms take about an hour each. All 3 took me about 3.5 Hrs w/ a lunch, and going slowly.

KillJoy