Questions For Lidio

[Bob Mathis]

Bob Mathis here Lido. I have a couple questions. I have a set of 03 Cobra heads complete. Are the cams good for use in my S/C marauder? Also can you please tell me something about this block, I all so have? The Casting #RF1L2E-6015-BB. The box has a PN 1L27-6010-BA.

Thanks Bob

[Lidio]

Bob Mathis here Lido. I have a couple questions. I have a set of 03 Cobra heads complete. Are the cams good for use in my S/C marauder? Also can you please tell me something about this block, I all so have? The Casting #RF1L2E-6015-BB. The box has a PN 1L27-6010-BA.

Thanks Bob


Bob

The heads and cams from the 03-04 Cobra are the same as the 03-04 Marauder and Mach-1 plus the Aviator. As far as the block goes I cant help on those numbers... Maybe one of the other members will see them and look into it for you. Although, is this new block iron or aluminum?

Thanks

[Bob Mathis]

The block is aluminum and it is new.

Thanks

[MADDOG]

Lido,

I have a Xcalibrator2 that i bought from you. I recently installed my Kooks headers. Is the the 4:10 tune already set for headers? If not, what adjustments should i make with my progamer? Should i adjust my air/fuel ratio?

Current mods installed:
4:10 gears W/STUD GIRDLE
JLT RAM INTAKE
KOOKS HEADERS/BASSANI X-PIPE/SUPER 40'S/DELETE TIPS

[2ndMDRebel]

The Casting #RF1L2E-6015-BB. The box has a PN 1L27-6010-BA.

Thanks Bob

When I go into work tomorrow I'll ask the fellas in the parts dept about those numbers and see if I can come up with anything for you, worth a shot.

*edit* They couldn't find anything on the part or casting #s, odd, they look like valid Ford #s, they tried cross-referencing and checking for superceded #s but nothing came up... sorry.

[Lidio]

Lido,

I have a Xcalibrator2 that i bought from you. I recently installed my Kooks headers. Is the the 4:10 tune already set for headers? If not, what adjustments should i make with my progamer? Should i adjust my air/fuel ratio?

Current mods installed:
4:10 gears W/STUD GIRDLE
JLT RAM INTAKE
KOOKS HEADERS/BASSANI X-PIPE/SUPER 40'S/DELETE TIPS

You really should get the A/F checked now that you've installed headers and probably a 2.5" exhaust of some sort. Believe it or not, the A/F on some cars doesn't go that lean or lean enough to worry about at WOT with a header and exhaust install. But its best to get it looked at.

[testme]

hey with the 4:10 gears does the cut the hp down my friends who deals with mustang told me this is there any truth to that

[MM03MOK]

hey with the 4:10 gears does the cut the hp down my friends who deals with mustang told me this is there any truth to thatNo, nor does it increase the HP. .