My new dead pedal design

[BigCars4Ever]

Here are some pics of my finished product. The pedal is made of laser cut 0.1" aluminum plate with a heavy brush finish. The base is laser cut 0.1" galvanized plate while the rod is cold formed 9/16" steel. The plate sits under the carpet and bolts behind the plastic harness holder. It sits at the same angle as the gas pedal at a hight of about 1/4 throttle when the pedals are all the way back. It feels very solid and very balanced. I made one to replace my prototype and one for my wifes 2000 GM. That leaves three up for grabs. Anyone interested? You can see the prototype installed in my car in the photo gallery.

[KillJoy]

Yes. How much!

KillJoy

[glassman99]

That looks great!

[BigCars4Ever]

I think $45 plus shipping would be fair for what I have into them.

[RoyLPita]

see post #23 of this thread for mine: http://www.mercurymarauder.net/forums/showthread.php?t=21073&highlight=dead+pedal

[BigCars4Ever]

What holds it in place??

[RoyLPita]

The grip tape is all the way around so it holds in just fine on the carpet. I had to fabricate a hook for it when it was in my rubber floored '95 CVPI.

[sabtaj1]

very nice. You should add a piece of bar to support the bottom. Kinda complete the whole circle for the people that stand on it. Or not, either way it looks great. I would definately be interested.

[Hotrauder]

I think $45 plus shipping would be fair for what I have into them.

Big, You have a PM. sign me up. thanks Dennis:beer:

[BigCars4Ever]

very nice. You should add a piece of bar to support the bottom. Kinda complete the whole circle for the people that stand on it. Or not, either way it looks great. I would definately be interested.
The design is very strong the way it is. Plus you can remove the floormat with no problems. I think you would be suprised how hard it is to bend 9/16" steel rod.

[sabtaj1]

count me in. I want it yesterday!!!

[BigCars4Ever]

count me in. I want it yesterday!!!
PM me your zip and you get the last of the three.:)

[natedog1284]

Damn! Guess I missed the boat on this one. Too bad, it looks like a really nice piece. Anyone know if Zack and Mac are still planning on making any? I really want a dead pedal! :help:

[SergntMac]

Anyone know if Zack and Mac are still planning on making any? I really want a dead pedal! :help: I know, and the answer is no. No dead pedal from Zack and Mac, likewise no control arms. No one wanted to invest in the real deal and that's cool, but you're on your own.

So am I.

So...How much, and where do I send my money?

[BigCars4Ever]

I have enough rod stock left to put together 6 more but I would need firm commitments from those six because the laser cutting wasn't cheap. It also would take a week to get the parts cause the place I use is pretty backed up.

[RR|Suki]

I have enough rod stock left to put together 6 more but I would need firm commitments from those six because the laser cutting wasn't cheap. It also would take a week to get the parts cause the place I use is pretty backed up.

do you take pay pal? cuz I'd be in firm even if I have to send snail mail

[natedog1284]

do you take pay pal? cuz I'd be in firm even if I have to send snail mail

Likewise here. Paypal is easiest for me, but I can send regular mail too. Put me down as a firm commitment! :D

[BigCars4Ever]

That's three. If I can get one more I'll order the 6 more.

[rayjay]

Count me in, I'll scrap my mustang dead pedal project.

[BigCars4Ever]

Check out my photo gallery. I showed the steps to install. Start with DPINSTALL1 and go in order. Be sure to read the comments at the bottom.

[jimlam56]

I'm in please.
Thanks, Jim

[jimlam56]

I know, and the answer is no. No dead pedal from Zack and Mac, likewise no control arms. No one wanted to invest in the real deal and that's cool, but you're on your own.

So am I.

So...How much, and where do I send my money?

I'm surprised to hear about the demise of the control arm GB in this thread?

[chaplir]

If you are getting six count me in too!!!

[LCSO34]

PM Sent :D

[HookedOnCV]

I've been looking for something like this for a while now...PM sent!!!

Todd

[BigCars4Ever]

Here's the list based on the response time between the thread and PM's RR|Suki, Natedog1284, Justme, rayjay, jimlam and chaplir. I tried to be as fair as possible. I will look into getting some stock to make more beyond this next six but I would like to wait to see how the first batch is recieved.

[natedog1284]

Awesome! Just let us know how much money you want and when, then consider it sent! :D

[jimlam56]

Awesome! Just let us know how much money you want and when, then consider it sent! :D
Also awaiting payment instructions.
Thanks, Jim

[Matt Johnson]

Here's the list based on the response time between the thread and PM's RR|Suki, Natedog1284, Justme, rayjay, jimlam and chaplir. I tried to be as fair as possible. I will look into getting some stock to make more beyond this next six but I would like to wait to see how the first batch is recieved.

Keep me on the list for future orders. I'm in - so much cooler looking than the KB pedal.

[Hotrauder]

My BigCars4Ever DP arrived this afternoon on the Brown Truck. This puppy is BUILT:bows: . No sweat that this is strong enough, Even BigDogJim can stand on this one, with both feet! This is a great design. If you have been looking for a DP this is it. Thanks Ron. Dennis:)

[Vortech347]

I'm game. Whats your paypal address. When will the next batch be ready?

[sabtaj1]

still waitin for mine to show up. Got my puppy sittin in the window waitin for the brown sleigh!

[jimlam56]

Here's the list based on the response time between the thread and PM's RR|Suki, Natedog1284, Justme, rayjay, jimlam and chaplir. I tried to be as fair as possible. I will look into getting some stock to make more beyond this next six but I would like to wait to see how the first batch is recieved.

Bigcars:
Please PM me with payment insructions.
Thanks, Jim

[sabtaj1]

YAAA BABY! Ups just left my house. Got the pedal and man this thing is pretty and stout. Cant wait to put it in. Thank you very much. I highly recomend this pedal its worth every penny.

[BigCars4Ever]

It's going to be at least another week before I have everything to put the next six together. I'm not a production house so it takes a little while before I can spool up. When I'm closer I will pm back payment instructions to the six mentioned above then figure out if and when I could have more done. Bear with me.

[sabtaj1]

well I just installed my floating dead pedal. let me tell ya this was very easy. Took me like 5 min. and it is awsome. Looks very good. almost factory once installed. These things are gonna sell like hotcakes. Better get your BCE dead pedal when they are ready!!!!

[sweetair]

Does the emergency brake engage fully with it in place? I have a KB dead pedal. I love it, but my emergency brake doesn't engage fully. When engaged, shifter in N ona hill, it rolls. Not good, but I like my pedal. This one looke quite interesting. I like it.

[BK_GrandMarquis]

Does the emergency brake engage fully with it in place? I have a KB dead pedal. I love it, but my emergency brake doesn't engage fully. When engaged, shifter in N ona hill, it rolls. Not good, but I like my pedal. This one looke quite interesting. I like it.

Looking at a picture in his gallery, it looks like it's further away from the e-brake than the Kenny Brown one.

http://www.mercurymarauder.net/showcase/files/3/3/1/4/newdeadpedal2.jpg

[sabtaj1]

Has plenty of room!!! be sure to look at his install pics before tryin to install. and its cake from there. and its not flimsy.

[Vortech347]

Sweet I can't wait.

[jimlam56]

It's going to be at least another week before I have everything to put the next six together. I'm not a production house so it takes a little while before I can spool up. When I'm closer I will pm back payment instructions to the six mentioned above then figure out if and when I could have more done. Bear with me.
No problem sir, just didn't want to be left out!:D

[magindat]

Does the emergency brake engage fully with it in place? I have a KB dead pedal. I love it, but my emergency brake doesn't engage fully. When engaged, shifter in N ona hill, it rolls. Not good, but I like my pedal. This one looke quite interesting. I like it.
Loosen the top bolt going thru the trim panel. Remove the bottom bolt. Add 4 washers to shim the bottom bolt out to clear the ebrake pedal. Tighten both back up.

Wish I would have known about this pedal earlier.

Nice work BC4E.

[sweetair]

Loosen the top bolt going thru the trim panel. Remove the bottom bolt. Add 4 washers to shim the bottom bolt out to clear the ebrake pedal. Tighten both back up.

Wish I would have known about this pedal earlier.

Nice work BC4E.This is close to what I did. The emergency brake does not hit the KB pedal, it hits the metal support piece. Really trying to not hijack this thread. I'm still trying to gigure out how to adjust the cable to engage sooner, if possible. Or push the pedal farther back?? That problem does not exist with this one. I bought one for my dad's Marquis and same problem. He had me take it out.

[BigCars4Ever]

I expect the laser cut parts this week for the next 6. Hopefully I will have them done by 21'st. I will keep everyone posted.

[Hotrauder]

I finally found 20 minutes when we weren't coming from or going to the hospital to install my new BC4E dead pedal. I told you that the thing is stout enough for the Space shuttle, well the install is easy enough for a newby dummy just like me. I found I did not have to trim the plastic to get a very secure install. It took all of 20 minutes, including time to find my tool box and a mat for the knees; start to finish. The fit is perfect for me. I am 6'1" and shrinking:D and I like to be close to my work in the cockpit so for reference for others I tried every seat position achievable and the angle is perfect no matter where I put the seat. I think it will work for everyone except perhaps Billy Barty and maybe Elvis(his license is expired). Strong, comfortable, easy to install and just what I needed for a brace at Sebring. Thanks Ron for a perfect solution and great service. You guys who are having to wait or have not yet signed up...it is the best $45.00 I have spend on any of my cars. Dennis NOTE: I have not been compensated other than by my complete satisfaction with my purchase. Ron, I want to know first about any other ideas you have for the Marauder. thanks Dennis:beer:

[jimlam56]

"it is the best $45.00 I have spend on any of my cars"


Coming from you Dennis, considering what you've done to your MM, that speaks volumes!
Glad I got my reservation in for the second wave, and yes I'll wait patiently...:D

[Hotrauder]

Jim, you will not be disappointed. Ron has done his homework on this great dead pedal. It looks great in the car, too. It goes nicely with the Dynopro pedals and Marauder sills and the function is first class. It is even more than I had hoped. Dennis:2thumbs:

[LCSO34]

Please keep me in mind if you make more or someone decides otherwise. Thanks

[BigCars4Ever]

The next six will be delayed a little longer. Some replacement parts I need for by bending machine wont be here untill next week. Sorry for the delay. I did put together a pdf file for installation. I can email it to anyone that would like to see it. It's too large to post at 304kB.

[Vortech347]

shoman96@aol.com

Hook it up!

[sweetair]

keep us posted when the next run is being made.

[SMOKE]

I'll jump in for the 12 - 18 piece run (looks like it's trending that way).

Been getting jerked around by a Canadian KB reseller, as recently as 2 weeks ago (claimed the "found" more stock, haven't heard a word since). Need a dead pedal.

Also sent PM of my intentions.

Thanks!

[BigCars4Ever]

It looks like there's enough interest to do another run. I'm still waiting on some replacement parts for my rod bender. While I'm waiting I'll look into ordering more rod stock. Please be patient I'm just a guy with a garage and some tools and little spare time.

[shakes_26]

I jsut installed this Dead Pedsal from BC4E, yeah its been collecting dust in the garage for two weeks at least!

I painted the thing, except the actual foot surface, even though its mostly hidden under the carpet.

My first thought lookign at it was ooooh too high up and to the right. I got in and tried it out..... I was wrong. Perfect. I'm 6'2" 250#, so I figure pretty average for this crew :), I leaned on this thing, I mean hard.

I felt some flex, so I leaned some more to figure out what was going on...it was the seat back flexing, not the dead pedal..... I'd say this product wins the fat guy seal of approval!!!

BC4E,

I took a little more off the plastic piece than you showed in the destructions, seemed to fit better. And I added a second 10mm nut to hold the bracket better. All told witha little test fit and rooting for a 10mm nut, 30 minute job. Sweet. :cool:

[BigCars4Ever]

I'm glad everyone has liked it so far. I guess not every car is the same so I can understand that you may have needed to trim a little more. Still waiting for some replacement equipment parts before I can make the next batch.

[natedog1284]

I'm glad everyone has liked it so far. I guess not every car is the same so I can understand that you may have needed to trim a little more. Still waiting for some replacement equipment parts before I can make the next batch.

Waiting patiently, sir. As long as I have my foot in the door, I'm happy; you're the last game in town. Thanks again!

[BigCars4Ever]

I will have the next 6 done this weekend. I hope this doen't sound greedy but I need to up the price to $50. I did not anticipate the wear and tear on my equipment and never thought to include expendables like mig wire and gas. I just can't justifiy all this work and losing money too. If this changes you decision to buy let me know. If not I will do a final run after this for the members who didn't get in on the first buy. Thanks, Ron

[rayjay]

I will have the next 6 done this weekend. I hope this doen't sound greedy but I need to up the price to $50. I did not anticipate the wear and tear on my equipment and never thought to include expendables like mig wire and gas. I just can't justifiy all this work and losing money too. If this changes you decision to buy let me know. If not I will do a final run after this for the members who didn't get in on the first buy. Thanks, Ron

I'm still in.

[HookedOnCV]

I will have the next 6 done this weekend. I hope this doen't sound greedy but I need to up the price to $50. I did not anticipate the wear and tear on my equipment and never thought to include expendables like mig wire and gas. I just can't justifiy all this work and losing money too. If this changes you decision to buy let me know. If not I will do a final run after this for the members who didn't get in on the first buy. Thanks, Ron


I'm still interested in this too! I can't wait to get one in my hands!!! $50 is more than reasonable for a heavy duty, well designed product like this. Please make sure that I'm on the list for the next run. I just barely missed getting in on the first batch. :(

Todd

[Matt Johnson]

Ron, I'm in! I sent you an e-mail, too. Let me know...

[jimlam56]

I'm still interested in this too! I can't wait to get one in my hands!!! $50 is more than reasonable for a heavy duty, well designed product like this. Please make sure that I'm on the list for the next run. I just barely missed getting in on the first batch. :(

Todd


Me too!
Thanks, Jim

[hdwrench]

i would like one if there are still some available

[BigCars4Ever]

Well the second batch of DP's are done and I'm ready to do a few more. I have on the list LCS034, HookedOnCV, Matt Johnson, NitrousSSC, Sweetair, JWMclane, and Hdwrench. Have I missed anyone?

[Matt Johnson]

Thanks! I just sent you an e-mail regarding payment/shipping, etc.

Can't wait to get it.

MJ

[jimlam56]

Just got mine from the man in brown.
All I can say is WOW!
Great construction, great value.
Thanks you sir!

[LCSO34]

WoooooHOOOOOOOO! Im still in!:D

[sweetair]

Well the second batch of DP's are done and I'm ready to do a few more. I have on the list LCS034, HookedOnCV, Matt Johnson, NitrousSSC, Sweetair, JWMclane, and Hdwrench. Have I missed anyone?Sent you a PM earlier today. Let me know the info. Thanks.......

[hdwrench]

just checkin back in for an update :)

[BigCars4Ever]

Work is killing me! We are just finishing up our RoHS (Reduction of Hazardous Substances) effort and I have been slammed with extra work. I will get the next group of DP's ready but it may take a little longer. Sorry everyone but please be patient.

[Hotrauder]

I have been test driving my BC4E dead pedal for exactly one month, now. It took me 2 seconds to get used to it, and if it disappeared now I would not be able to drive my car. I love it, though I have to admit that I hadn't even thought about it at all for about 3 and a half weeks till yesterday when I realized once again that it was there. Oh, by the way the dead pedal has enjoyed the spirited driving. Dennis.:beer: I have not, unfortunately; been compensated for this except by the excellence of my $45.00 investment. I may have been the first to order. I am not usually that smart. Dennis:D

[jimlam56]

I concur Dennis.
Not only for spirited driving, but comfort on a long drive!:banana:

Heckuva value for the money, thanks again Big!

[Architect]

Does the emergency brake engage fully with it in place? I have a KB dead pedal. I love it, but my emergency brake doesn't engage fully. When engaged, shifter in N ona hill, it rolls. Not good, but I like my pedal. This one looke quite interesting. I like it.

I did two things with my KB dead pedal...added two more holes with welded nuts (just like original set) closer to floor board...about 3/4"...so the pedal braket mounts closer to the floor board...hope that makes sense...
I also asked my dealer to tighten the emergency brake setting during one of my service visits...:D
Architect

[natedog1284]

I finally got to open mine this weekend. WOW, you guys weren't kidding about the construction. We're talkin some heavy duty stuff here. Now I just can't wait to put it in! :D Thanks again Ron, I couldn't be happier!

[SMOKE]

Just checking back in. Glad to see I made the list. BC4E take care of business and concentrate on this project when you can. Sounds like good things come to those who wait!

Best Regards,

[BigCars4Ever]

Got the next set of parts on order from the laser cutter. I should have the next group done in a couple of weeks.

[rayjay]

Received and installed mine today. Worth every penny! BC4E is the MAN!

[sweetair]

I did two things with my KB dead pedal...added two more holes with welded nuts (just like original set) closer to floor board...about 3/4"...so the pedal braket mounts closer to the floor board...hope that makes sense...
I also asked my dealer to tighten the emergency brake setting during one of my service visits...:D
ArchitectI am assuming you had the same issue as me. I also take it that the problem is now gone?? Sounds like a great fix......

[BigCars4Ever]

OK everyone. I know it's been a while but I have 11 more done. I have been busier than a one legged man in an ass kicking contest. To make life a little easier I am just going to set a flat rate for shipping. Mostly cause the UPS estimater has been low on every one I have shipped so far. So $62 includes UPS ground shipping to anywhere in the continental US. If you want to pay by credit card through paypal please add $3 cause that's what I get charged by pay pal for credit card transfers. Please PM me and I will reply with my paypal account and I can email the install instructions as a pdf. Sorry for the change in the rules but I just need to simplify this. Thanks, Ron

[jimlam56]

Anyone that doesn't have a dead pedal, and wants one needs to jump on this.
I can attest to the quality and functionality of these dead pedals.
Don't know for sure, but I doubt Ron is gonna just keep cranking these out, so get em while there are some available!

[LCSO34]

PM Sent Thanks

[prettyrico]

Exactly what does a 'dead pedal' do?

[fastblackmerc]

Exactly what does a 'dead pedal' do?
Do a search and you'll find an answer.

From SgtMac's latest post: "A dead pedal is many things to many people, but it's original intent on the Marauder was to give shorter folks some "floor" for their left foot. Kenny Brown is about 5'8" tall.

I'm 5'9", wear a 9-10 size shoe (depending on shoe style), and I can't touch the floor when seated in my favorite driving position. With a dead pedal in place, I can brace myself in the seat with my left foot, while my right is free to brake or accelerate.

I am sure I am exerting much down force of the pedal, so, it's got to be strong and securely mounted, and this frees my upper body to control the car without getting thrown around in the twisties/hard cornering.

You guys over 6'/size 13, could prolly care less...LOL!"

[Dragcity]

Could you please send me install instructions. I may be interested in getting one. Just want to see what I have to cut, drill, bend or break to install it.


Thanks

[jimlam56]

Could you please send me install instructions. I may be interested in getting one. Just want to see what I have to cut, drill, bend or break to install it.


Thanks

Joe, look at BigCars4ever's gallery.
You will see install pics there.

[Dragcity]

Alright, Send one along for me.....Please.....

[SMOKE]

Order sent and payment sent. Thanks for all your hard work BC4E...I know I'm gonna love this...

JWM

[BigCars4Ever]

Last call for dead pedals. I have a few left. If there's no takers I will post on Ebay for kicks but I wanted to offer them here first one last time.

[SMOKE]

Got the pedal installed this weekend. SUPER SWEET!!!

It sits right where you need it, stout as hell, looks killer and doesn't interfere with the interior trim (no cutting except for on the wire harness behind the kick panel) or floormat.

I don't think I could live without it now.

BC4E, thanks for all your hard work. Very much appreciated on this end.:)

JWM

[BigCars4Ever]

How funny, I just noticed your location in Middletown Ct. I went to Highschool at Xavier High but I lived in North Branford. I miss the scenery but not the winters.

[SMOKE]

Gotcha....don't really care for the winter's myself (but like having all 4 seasons). Wouldn't mind seeing a little snow today though, it's over 90 with some monster humidity kicking right now...

[HotrodMerc]

Last call for dead pedals. I have a few left. If there's no takers I will post on Ebay for kicks but I wanted to offer them here first one last time.
BC4E, just noticed this thread for the first time tonight. If you have any dp's left i will take one. Or if they are gone sign me up for next run if you do any more.
If you have them please pm me and i will put a check in the mail. Thanks!

[Dragcity]

I finally installed mine. Nice. Piece of cake to do. I had only one nut holding the plastic wiring harness on the two supplied studs. Good thing I saved the nut I found under the seat when I got the car. It was the same size, different color, but same size......

I think I need to adjust the pitch just a bit. Any ideas ????? I will give it a couple days, but I think I need to increase the angle about 3-5 degrees.

Why didn't the Marauder come with this already?????

Nice job Ron....! :beer:

[BigCars4Ever]

I finally installed mine. Nice. Piece of cake to do. I had only one nut holding the plastic wiring harness on the two supplied studs. Good thing I saved the nut I found under the seat when I got the car. It was the same size, different color, but same size......

I think I need to adjust the pitch just a bit. Any ideas ????? I will give it a couple days, but I think I need to increase the angle about 3-5 degrees.

Why didn't the Marauder come with this already?????

Nice job Ron....! :beer:
More steep or flatter?

[sweetair]

I just installed mine last night. It was a breeze. Now I can't wait to drive it. Thanks Ron........

[Dragcity]

More steep or flatter?

Just a bit more steep. I am driving 160 miles daily this week. I am fidgeting around with my seat to get the right fit w/o having to shim the top......

I suspect I could get a couple Stainless Steel washers and put them under the rest to raise the top, while leaving the bottom where it is.....? I imagine 1/4 inch would do.

Maybe even a rubber cover to bolt to the aluminum rest. Could be extended too.

A modded mod ??????

I prolly just have to get used to it. The one in my Jag is what I am used to.... Need to stop driving the Jag !

[BigCars4Ever]

Last one has been sold. If there is any interest in more I will once again entertain building some but it needs to be 5 or more so I can meet my min laser cut lot. Thanks to everyone that has supported this. It was a lot of fun!

[carguy1ok]

How much and will you send it to an APO military overseas address? It wil not be any more pain other than a customs form and I will pay shipping.
Thanks, Jason Russi

[carguy1ok]

Please make more and sell me one! My ankle is killing me from having my foot sagging around or kne bent so I can have my foot flat all the time, this can make my life a lot easier.
Thanks in advance! (looks really nice, good work!)
Jason Russi

[snowbird]

Well,

Count me in the waiting line ! I will send a money order when you're ready to PM me your instruction.

[BigCars4Ever]

Let me check to see if I have materials left to make a few more. The C1018 rod is a special order and I can only get 20' legnths.

[Grifter]

put me in that line as well. I would like one.

[jdando]

put me in that line as well. I would like one.

Luke, this is a quality piece of work. I have one installed and love it.

jeremy

[Grifter]

awesome

the left foot just feels unloved sitting there in the void of the footwell..

[shami02]

R U still making these? Price and guess-ta-ment shipping and turn around time for the order? Post or PM when you have the time TNKX!

Have a good wekend.....:beer:

[jimlam56]

Luke, this is a quality piece of work. I have one installed and love it.

jeremy


X2!
I've met the inventor; he's a standup guy!:D
Jim

[SMOKE]

I got mine last year! I love it!

The first day I drove my MM home to CT from LI, NY was the first extended trip I'd taken besides a test drive. I remember, not to far into my trip, that my left foot was hype-extended and wished for a DP right then and there. Looked up KB, but we all know the state of that affair.

When BC4E came along w/ his solution, and the reviews he got....I was sold.

Solid piece, no-hassle install and immediate satisfaction....

Looks like if we keep posting this up there may be another round for another group??

Best of luck...these homegrown solutions are a neat benefit to this site...

JWM

[djbruce26]

:curiosity piqued:

When might these be available again?
(Please respond via PM, thanks)
</please>

[BigCars4Ever]

I think I have enough rod stock to make 3-4 more. I will check with the laser cutter this week. I'll keep you posted. Thanks.

[Starman]

If you wouldn't mind, this P71 driver would like to have one. :D

[2003godshead]

Go ahead and put me on a list, I'll wait.

[BigCars4Ever]

I ordered 5 more sets of laser cut parts. They should be done in a week and I'll need a week to assemble them. I'll keep everyone posted. Thanks.

[Grifter]

Thanks!
Who is on the list for this run?

[Cliff Kavanaugh]

I would like to buy one of your dead pedals. Cliff kavanaugh

[SMOKE]

Yea!:banana2:

Magic to all those with the skill to provide to the collective (for rewards you define)...

Nice developing MM.net purchase yet AGAIN...

:bump:

Sorry if this round keeps you too busy BC4E!

Signed,
Satisfied Customer

[snowbird]

Great news. Thanks ! :)

[drgnrdr33]

I'm interested too. PM or reply here if you are making more.... Thanks!

[Green96]

I am in. Please PM me when you are ready to make more and tell me how to pay.

Thanks

[GEMs Marauder]

I want one

[GEMs Marauder]

PM me if I can get one of that dead pedal

[BigCars4Ever]

After a short run in with the flu I finally managed to finsih this run of dead pedals. I have 6 altogether but there ended up bieng many more requests. I am looking at geting more rod stock so everyone gets one but i need to see where we all stand. The price is $65. That includes shipping to the continental US. Paypal is fine but so is check or money order. I am going to offer these in the order requested. I will post the list here and pm the first six persons onthe list. If any of the original six back out I will continue to work down the list. If you are not one of the original six please let me know if you still want one and if there is still enough interest I will get more material. Please keep in mind that this is a not-for-profit endeavour for me but I do enjoy supporting the community. Thanks

1 carguy1ok
2 snowbird
3 Grifter
4 shami02
5 toomanyfords
6 djbruce26

and the alternates
starman
2003godshead
CliffKavanaugh
drynrdr33
green96
GemsMarauder

[Dragcity]

The one you made for me in presently covered in Black Leather. Looks really nice. Now all I need is black screw heads, and it will be invisible....

[Grifter]

BC4E, replied to your PM.
Dragcity, what size/style bolts do you need? we have a little selection of black bolts here at work. Mostly Allen head, Metric thread, in various head styles, round allen, countersunk, domed, and a few hex head..

[Dragcity]

They are definitely countersunk. Size, I dont know. Just a machine screw with neoprene sleeved nut.

Thanks for the offer Gifter....

[Grifter]

BC4E just finished up my dead pedal, so i wont have it in hand for a while, but when i do, i can try to match up some black bolts for it and let you know.

[Dragcity]

Sweet, And I can send you a peice of Black, Grey, Red or any other color leather you want....

The silver pedal was irritating me, so I glued some scrap leather on it.

[Raudermaster]

Count me in for one.

[BigCars4Ever]

They are definitely countersunk. Size, I dont know. Just a machine screw with neoprene sleeved nut.

Thanks for the offer Gifter....
They are 1/2 inch 8-32 flat SS flat heads but on the new run I went with a 6 - 32 because I wouldn't have to ream all the bracket holes wich was time consuming.

[djbruce26]

So I just installed mine... I'll make a post on Crownvic.net, MercuryMarauder.net and on Motortopia.com about my installation of it and my thoughts. Tomorrow I'm going to be travelling about 500 miles, mostly highway/cruising so we'll see how great it works. As of right now it's extremely comfortable.... I'm gonna go take a test drive.

[shami02]

:beer:

Just got mine and installed it... I had just put on the new rotors and pads I got for Christmas (courtesy of Dennis Reinhart’s shop) from my wife. The dead pedal was a great asset in keeping my big old behind in the seat while breaking in the new binders... Just a side note (remember to each mod’er his own) I repainted all of the silver painted surfaces flat black...The shiny pedal surface of coarse I left alone but I wanted to camouflage the remaining parts, short of like a hovering third pedal. Big Grin! Thankx again Ron!<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

[bamnq6]

If you plan on making any more of these fanatastic looking and beefy pedals, please consider me as a purchasee (is that a word??).

Thanks much, and excellent design work!:up:

Also: PM sent

[Luch]

This seems like the hot ticket from all the positive response...ready to order!!

Chris

[SpruceGreen'03]

Put me on the list for one too.


FYI;

You can buy smaller lengths of 1018 steel online from:

www.mcmastercarr.com (http://www.mcmastercarr.com)

I have done business with these folks for several years, and they provide excellent service.

No sure if it will be any cheaper to buy the shorter lengths, but worth looking into.

[kayzap]

I need two. One for the Maureder and another for the '04 CVLX Sport.

PM me and I'll send the loot.

[TooManyFords]

Ok, I found the pictures in the gallery, but how do I get the plastic trip piece off without breaking anything?

Is there a special trick to this?

Thanks

john

[TooManyFords]

Nevermind! Just pulled a little harder and POP! Got the plastic trim out and it was a 10 minute install. I took it out for a cruise and I have to say that this has to be the second most enjoyable mod.

What everyone else said. +1

John

[BigCars4Ever]

I bent up the bar stock. 15 alltogether and boy am I sore! Not used to this manual labor. Still waiting for the laser cut parts. He is running way behind. It may still be another couple of weeks. Sorry for the delay.

[SpruceGreen'03]

I would like to purchase one, if it's not too late.

[GEMs Marauder]

When can I get one of the dead pedal?

[kayzap]

Don't forget to save me two. I'm not worrying how long it takes. From all I've heard they are worth the time it will take.

[larryo340]

I would like to be added to the list if not too late!!:bows:

[marales]

If I can still get one, Im intrested.

[officerp]

Add me to the list too! Thanks.

[SpruceGreen'03]

Bigcars4ever;

Any chance you can let us know where we stand with respect to getting one of your dead pedals?

I have expressed interest twice in this thread, and still do not see any information posted about who is getting in on your next batch.

Thanks !!!!!!!!!!!!!

[BigCars4Ever]

Bigcars4ever;

Any chance you can let us know where we stand with respect to getting one of your dead pedals?

I have expressed interest twice in this thread, and still do not see any information posted about who is getting in on your next batch.

Thanks !!!!!!!!!!!!!

I finaly got word that the laser cut parts are done. I'll work on the list this weekend and let everyone know where they are in line. Don't worry, if you missed this cut I'll do another one. I have plenty of rod stock now.
Thanks everyone for bieng patient.

[SpruceGreen'03]

Awesome !

Thank you very much !

[Lgaruti]

Please put me on the list for one!

[knine]

Me three. :D :D :D

[Raudermaster]

BC4E, don't forget I asked for one a few pages back. ;)

[1stMerc]

Don't forget about me. I want one.

[BigCars4Ever]

OK Here is the list. As fair as I can make it.
Luch
Starman
2003godshead
CliffKavanaugh
drynrdv33
Green96
GemsMarauder
1stMerc
USAFSniper
Raudermaster
Bamnq6
SpruceGreen03
Kayzap (x2)
I still have a about a week left to finish. I have a lot of new responsibility at work so time is tight. I hope this weekend to have them done.
Everyone not on the list chime in again so I can figure out how many more are needed.
Thanks....Ron

[Lgaruti]

Ron, Please add me to the list. Tnx, Larry

[knine]

KNINE, add again KNINE. :bows: Hooray, I have 2 panthers. Thanks, again.


OK Here is the list. As fair as I can make it.
Luch
Starman
2003godshead
CliffKavanaugh
drynrdv33
Green96
GemsMarauder
1stMerc
USAFSniper
Raudermaster
Bamnq6
SpruceGreen03
Kayzap (x2)
I still have a about a week left to finish. I have a lot of new responsibility at work so time is tight. I hope this weekend to have them done.
Everyone not on the list chime in again so I can figure out how many more are needed.
Thanks....Ron

[officerp]

I'm still interested! Thanks.

[Blackened300a]

OK count me in for one.

[Luch]

I am interested...please sign me up! If you can PM me you mailing address I can get that part of it going for payment.

Chris

[BigCars4Ever]

I am interested...please sign me up! If you can PM me you mailing address I can get that part of it going for payment.

Chris

Check the list...you were #1!

[shakes_26]

Hey Ron,

still have your dead pedal installed, it was a god send..especially around the track at Sebring...about the only thing that kept me from getting tossed around!

Folks, this is a deal and I think its built like a brick outhouse. I hope no one comes along and tries to undercut you.

[snowbird]

^^^^^ What he said ^^^^^

I installed mine a little while ago and it is truly a perfect fit mod, no hassle, no drilling using factory studs. Strongly built, factory part fit and motorcycle aftermarket part finish. The works !!

Free local delivery is possible if you can produce a canadian passport and find an excuse to go to Orlando, which I did !! ;)

[BigCars4Ever]

With the exception of Starman everyone on the original list has been pm'd. The new list is as follows:
local boy
finster101
larryo340
marales
officerp
lgaruti
blackened300a
That's 7 but I only have parts for another 5 comming in. Don't worry though I have a plan. I will allow a week for the people on the first list to respond. If no one cancels then I will order 5 more sets and have a few for back up.

[1stMerc]

With the exception of Starman everyone on the original list has been pm'd. The new list is as follows:
local boy
finster101
larryo340
marales
officerp
lgaruti
blackened300a
That's 7 but I only have parts for another 5 comming in. Don't worry though I have a plan. I will allow a week for the people on the first list to respond. If no one cancels then I will order 5 more sets and have a few for back up.

I just sent you a reply to the pm.

[SpruceGreen'03]

Payment sent, PM sent !

[jimlam56]

Hey Ron,

still have your dead pedal installed, it was a god send..especially around the track at Sebring...about the only thing that kept me from getting tossed around!

Folks, this is a deal and I think its built like a brick outhouse. I hope no one comes along and tries to undercut you.

I'm with you Marc on ALL points...
One of the best mods I've done.
I think about it every time I drive the car.

[Raudermaster]

Thanks Ron! You da man. I'm waiting to get mine in the mail and I will install it this weekend. I got the directions too.

[larryo340]

<TABLE cellSpacing=0 cellPadding=6 width="100%" border=0><TBODY><TR><TD class=alt2 style="BORDER-RIGHT: 1px inset; BORDER-TOP: 1px inset; BORDER-LEFT: 1px inset; BORDER-BOTTOM: 1px inset">Originally Posted by BigCars4Ever http://www.mercurymarauder.net/forums/images/buttons/viewpost.gif (http://www.mercurymarauder.net/forums/showthread.php?p=493295#post49 3295)
With the exception of Starman everyone on the original list has been pm'd. The new list is as follows:
local boy
finster101
larryo340
marales
officerp
lgaruti
blackened300a
That's 7 but I only have parts for another 5 comming in. Don't worry though I have a plan. I will allow a week for the people on the first list to respond. If no one cancels then I will order 5 more sets and have a few for back up.


</TD></TR></TBODY></TABLE>
Yep, still want it. I will be away this weekend, be back Monday to answer any PM's
(two friends in Hot Rods' pump gas drags in Memphis)

[officerp]

Hi,no PM received,but I still want one! Could you Pm with price and payment info? Thanks,Kevin

[Local Boy]

Still interested. PM sent. Mahalo

[SpruceGreen'03]

Received mine today - Looks Great !!!

Will post some before and after pictures when I get a chance to install it.

http://members.tccoa.com/steve1995/foot-rest.jpg

[1stMerc]

Mine came today.
Going to be a busy week, new rear tires, Zack control arms, Big Cars dead pedal, oil change and unfortunately the dreaded windsheild wiper issue.

[BigCars4Ever]

Wow, That was fast! I'm sure you'll like it once it's in.

Two people have not responded to my PM's
CliffKavanaugh and
drgndr33

Please guys respond if you do or do not want these. This way I can move down the list. I'll wait till Friday to hear from you.

Since there is more interest than dead pedals I will do another run. Unfortunately due to travel plans they would not be done for 5 weeks. I'll check back in when I get back to see how many still want one.

Thanks,
Ron

[kayzap]

Received mine today - Looks Great !!!

Will post some before and after pictures when I get a chance to install it.

http://members.tccoa.com/steve1995/foot-rest.jpg

Do me a faver and post during install pictures too please. Thanks.

[kayzap]

Got mine today. As you can see from the picture above they appear to be high quality. Those pics don't lie. These are very well made. NASA quality.

[1stMerc]

http://www.mercurymarauder.net/showcase/files/3/3/2/7/DeadPedal.JPG

Ron, hope you don't mine but had to do something with the pedal from the other guys. It's been sitting aroun for a year and a half.

[Local Boy]

Thanks Ron, PM sent

[BigCars4Ever]

http://www.mercurymarauder.net/showcase/files/3/3/2/7/DeadPedal.JPG

Ron, hope you don't mine but had to do something with the pedal from the other guys. It's been sitting aroun for a year and a half.
No problem, Creativity is appreciated. If you really wanted I could make one with the mounts closer together. Just a thought.

[Raudermaster]

Installed mine today Ron! Took me about 30 minutes to do it, and it looks great, I can't wait to try it out. Thanks!
http://www.gigafiles.co.uk/files/828/BC4E%20001.jpg

[1stMerc]

http://www.mercurymarauder.net/showcase/files/3/3/2/7/DeadPedal0.JPG


Installed today, took about 30 minutes. Only backed car up for a washing, but foot fell so naturally to pedal, like it had been in there all along. Don't know how many measure twice cut once you went through, but you nailed it. Full test tomorrow.

Thanks again Ron for making the run.

[Raudermaster]

OhOhOhO all shiny pedal, show off. :D

[SpruceGreen'03]

Here are some shots of my installation:

Installs easy - looks great - and foot position feels just right.

Thanks to Ron for providing an awesome product


Before picture:

http://members.tccoa.com/steve1995/FR-1.jpg


sill plate, door seal, kick panel and carpet repositioned:

http://members.tccoa.com/steve1995/FR-3.jpg



Harness bracket trimmed per instructions:

http://members.tccoa.com/steve1995/FR-2.jpg


Foot rest in position before buttoning things back up:

http://members.tccoa.com/steve1995/FR-4.jpg


"Finished" photo

http://members.tccoa.com/steve1995/FR-5.jpg


Picture showing where I made a 4" long notch in carpet to clear foot rest bar.

http://members.tccoa.com/steve1995/FR-6.jpg

[1stMerc]

Nice. I like that carpet notch idea. That light flint looks good.

[larryo340]

I just installed my dead pedal and I don't think it could have been easier. The quality of the pedal is second to none. My foot goes right to the pedal like it has been there all along
Yep it did fit exactly the same in my '98 MGM

Highly reccommend to buy this one !!

[usafsniper]

For anyone who's done this, what's correct socket size to remove the bracket nuts?

Thanks.

[SpruceGreen'03]

10mm deep socket

[usafsniper]

Thank you.
10mm deep socket

[finster101]

Did mine today, took 15 minutes. Fits like a charm. Since we seem to have an oddball, short run car it is really good that we have such talented people as we do among us. Thanks Ron!

[BigCars4Ever]

I got the ok to use the equipment in the shop at my new place of employment. So...Do I have any takers on another run?

[Grifter]

If your on the fence about these... Get it! It is SO worth it. The build quality is fantastic and it makes the car much more confortable to drive.

[knine]

Got mine, they're GREAT. Thanks.

[larryo340]

amazing quality dead pedal, it's what the car needed!:banana2:

[Aren Jay]

Dead pedal is something I will not be getting. Part of the reason for getting the Marauder was being able to stretch my legs while in the car. Couldn't do it since my 86 Mustang but I can now.

[larryo340]

Dead pedal is something I will not be getting. Part of the reason for getting the Marauder was being able to stretch my legs while in the car. Couldn't do it since my 86 Mustang but I can now.
Unless you have very large feet there is still plenty of room.

[Aren Jay]

I would say my 13 shoes are not that big but you should see my winter boots.

[AzMarauder]

I got the ok to use the equipment in the shop at my new place of employment. So...Do I have any takers on another run?

Yes sir.... I would be very interested....

[BigCars4Ever]

That's 1... anyone else? I need a min of 5 for the laser cut parts.

[Zack]

I have 20 brackets made up to sell my own, but I want one of yours instead.
Count me in for one!

[GrazniM]

I'll take one

[Local Boy]

Just wanted to say... Thanks Ron...Mine are perfect...ALOHA

[BigCars4Ever]

I have 20 brackets made up to sell my own, but I want one of yours instead.
Count me in for one!
Zack, Comming from you that is the ultimate compliment. I count three so far. I'll put in the order to the laser cutter and have a couple of spares. It'll take about two weeks. I'll post once I am close.

[knine]

I was showing mine off last night, you should be hearing from GEEMAN real soon.

[BK_GrandMarquis]

I'll take one. :D

Why I need another one? Beats me but I rather have one and not need it than need it and not have one. LOL. ;)

[kayzap]

My two are in and they are the tops! What a well designed quality piece.

[monefive]

Zack, Comming from you that is the ultimate compliment. I count three so far. I'll put in the order to the laser cutter and have a couple of spares. It'll take about two weeks. I'll post once I am close.


Are you getting close? I'll take one too please! :)

[KillJoy]

My new DP arrived last night. Looks be a pretty solid unit. It SHOULD be getting installed this weekend.

Thanks for a quality product!

:up:

KillJoy

[sweetair]

My new DP arrived last night. Looks be a pretty solid unit. It SHOULD be getting installed this weekend.

Thanks for a quality product!

:up:

KillJoyI have had mine for well over a year. Even got one for my dads GM. Great product. Better than the Kenny Brown one I bought. My e-brake could not be activated fully with the KB pedal. This one is top notch................Thanks again...........:beer:

[GrazniM]

Big, I just put mine in - absolutely incredible work on that DP; it feels awesome - rock solid and at a perfect angle, like it was made just for me. :D

If you do another run at some point and anyone was on the fence about this I strongly recommend not thinking - just get one. Thanks again!

[fastcar]

Everyone is having so much fun, I want to, also :banana:

Seriously, please count me in. I'm sick of going around corners balls out, and feeling like I'm going to fall out of my car. (It solves this problem, right?)

fastcar:burnout:

[knine]

........and HOW !! got them in both my panthers ! SWEET !!

[RCSignals]

is there another run going on now?

[larryo340]

:banana2: perfect in quality and function

[BigCars4Ever]

Another run will happen soon. Towards the end of the month most likely.

[rlbforum]

Another run will happen soon. Towards the end of the month most likely.

Any runs coming up? Really need one. :D

[KillJoy]

Ok....got the DP installed.

Why on Earth did the car NOT come with one of these?!?!?!?

:up:

VERY NICE! KillJoy Recommended!

:D

KillJoy

[fastcar]

I'm jealous. Can't wait to order mine!

fastcar:burnout:

[BigCars4Ever]

I got the materials but my back is acting up again and I'm afraid to try and bend the stock. May wind up in the er again. I'll shoot for this weekend to bed up the rod stock. In about two weeks I should have this done.

[jimlam56]

I got the materials but my back is acting up again and I'm afraid to try and bend the stock. May wind up in the er again. I'll shoot for this weekend to bed up the rod stock. In about two weeks I should have this done.


Ron, forget about the DPs until you feel better.
I'll be in the area next week, anything I can do to help?
Jim

[rlbforum]

I got the materials but my back is acting up again and I'm afraid to try and bend the stock. May wind up in the er again. I'll shoot for this weekend to bed up the rod stock. In about two weeks I should have this done.


Don't push it. Take care of yourself first. When you are ready, shoot me a PM and let me know. I will take one.

[BigCars4Ever]

I've been hanging on my inversion table every morning and night. That usually sets me straight again. I'll be ok by Sat. Jim, thanks for the offer but there is a definate learning curve in bending these things and once they're bent there's no going back. With the bench bender I use this is more art than science. I have a box full of "learning" that I may turn into a piece of art one day.

[BigCars4Ever]

I got the rod stock cut and bent this weekend. My back is feeling pretty good still. Sucks getting old! Anyways here is the list I have for persons who have asked for dead pedals. If your not on the list pm me please. I will most likely make some extra this run anyways.

monefive
ts-pa
tomd
VicsEvilBrother
SilverSurfer03
BeamMeUp
jsvic
fastcar
rcsignals
rlbforum

I think that's everyone I heard from. I'll be ordering the laser cut parts this week. Thanks BC4E

[G-Tac]

If it's not too late, count me in.

[ts-pa]

Do you take paypal payments? Count me in for one dead pedal!

[BK_GrandMarquis]

Me too!!! ;)

[BigCars4Ever]

I should have these done this weekend!

[BigCars4Ever]

(In a whisper) I see dead pedals.
They are done. If you are on this list....
monefive
ts-pa
tomd
VicsEvilBrother
SilverSurfer03
BeamMeUp
jsvic
fastcar
rcsignals
rlbforum
BK GrandMarquis
G-Tac
dalucifer
Then you recieved a PM with instructions.
If not then it's not too late. This time I made a few extra. Let me know.
Thanks everyone.

[Hotrauder]

Ron, sorry to learn of your health problems. I want you to know that I recommend your dead pedal to everyone. I was one of the first and will fight anyone to keep it. Nothing else is even close. Dennis:beer:

[BigCars4Ever]

Dennis, Thanks a lot. I do have a lot of fun making these. I've been feeling pretty good latley. I just have to keep using my inversion table and doing my stretching.

[Richy04]

BC4E,

Let me know if you have any left or if you are making more.. I am interested... Tnx Richy

[rayjay]

I was in the 1st or 2nd go round. Mines been in for 15 months, went through last winter, and still looks new. Great product!

[knine]

I've had mine in both my panthers for a few months now..........I LOVE 'EM. Can't see being without them. :2thumbs::2thumbs:

[Jimimac43]

How do I order and pay for one of these? Shipping to Ruskin Fl. Thanks Vince.

[RacingRob]

BigCars4Ever
You have a PM.
Thanks,

RR

[BigCars4Ever]

To everyone that has paid so far. I won't be able to ship those out until Sat morning due to time demands at work. They are packed and ready and will definitly go Sat. Sorry for the delay. They will go out 2 day priority so everyone should have them by Tuesday. Again sorry for the delay.

[ts-pa]

Your taking too long, I want my money back.

Just kidding, looking forward to getting them next week!

Here (http://pasig.myphotoalbum.com/view_photo.php?set_albumName=a lbum08&id=IMG_0287) is a pic of Rayjay's dead pedal from BC4E.

[jsvic]

Received and installed today. This thing looks bulletproof. It'll probably outlive my good old P71 :beatnik:
No more awkward foot position... Thanks again!

[RacingRob]

Got mine yesterday, will install today.
I picked up some rubber grommets at my local hardware store.
Stuck them in the holes on the dead pedal . Kind of gives it a bit more finished look.
Nice looking part!

RR

[BigCars4Ever]

Got mine yesterday, will install today.
I picked up some rubber grommets at my local hardware store.
Stuck them in the holes on the dead pedal . Kind of gives it a bit more finished look.
Nice looking part!

RR

I like that idea!

[ts-pa]

Got mine yesterday. Thanks! I'll install this weekend if the weather cooperates.

[RacingRob]

Installed mine today.
One BIG problem............

It makes the brake and gas pedals look like crap! ;)
Who sells the aluminum pedals?
Thanks,

RR

[blkwidowmerc]

I think $45 plus shipping would be fair for what I have into them.
what is the purpose of this type pedal

[dalucifer]

I am still waiting for mine..It will go in on sunday if i get it this week...:)

[knine]

what is the purpose of this type pedal
Read thru from the begining of this thread. You'll pick up all kinds of good info. :)

[ts-pa]

what is the purpose of this type pedal

It is a high performance boost pedal, keeps you planted in your seat when you nail the gas pedal! ;)

Kidding aside, your left foot sort of dangles or is positoned odd without the dead pedal. It simply gives your left foot a comfortable place to rest.
I have found that my left knee and ankle gets sore on long trips from an odd sitting position. I tend to plant my foot sideways on the floor, holding my knee against the door. Odd, yes, but it beats sliding around in the seat.

[fastcar]

what is the purpose of this type pedal

All roadrace cars have them. When you nail wicked off ramps, don't you feel like you need one? I feel like I'm going to slide out of the car!

Just got mine today. Looks great. But I have no installation instructions, and no mounting hardware...

I'll have to search around and see what everyone else is doing...

fastcar:burnout:

[BK_GrandMarquis]

All roadrace cars have them. When you nail wicked off ramps, don't you feel like you need one? I feel like I'm going to slide out of the car!

Just got mine today. Looks great. But I have no installation instructions, and no mounting hardware...

I'll have to search around and see what everyone else is doing...

fastcar:burnout:

Contact BigCars4Ever. He was going to email everyone the instructions. ;)

[fastcar]

Thanks GM,

I never got the instructions, but figured it out myself. It's easy for an expert, but I think a novice could have some trouble with the clips holding the kickpanel in, and a couple other issues.

For someone with experience, pretty simple. There is always the fear of breaking a plastic part, when wrestling with these things, though :eek:

I lost one of the white bottons that the panel slides into. I had to pull it out to put it on the panel, then install the panel, but it popped out of the door jam, and I could never find it again:shake:

fastcar:burnout:

[fastcar]

Firstly, kudos for a quality, robust, well fitting item. The holes line up, and it slides right in place.

Having said that, I would be interested in a LIGHTWEIGHT version of this pedal. Version 2.0. It could easily be made of aluminum sheet stock. Even if it was engineered in a manner that required cutting the carpet, I wouldn't care. Or, it could be made in a similar manner to this one, with Aluminum sheet and bar stock. Look, on a boat like this, I'll take every pound I can in savings...

Positioning: I'm taking the car out to evaluate the pedal now. My initial impression just sitting in the driveway is that it's a bit high for me. I'm 5' 11" with a 31" inseam, and like my seat way back, with the steering column way down. I'm most comfortable like that. In this position, the pedal is too high, and my foot's pad (the part that makes contact with the ground, below the toes) just makes it on the very bottom edge of the pedal. While resting my foot on the pedal, I actually see half of the pedal ABOVE my foot, where it serves no fuction.

I think BigCars4Ever designed it like this, maybe, so we wouldn't have to cut the carpet. That's why it's so high, and why he used really heavy steel bar stock - so he could cantilever the pedal way over the rug. I just don't like the weight, and I'm not yet sure it goes down far enough...

Again, the fit and finish are top notch, and it is robust. For someone who sits close to the dash, and doesn't care about shaving weight, it could be perfect.

I'm going to test it out for a few days, and see if It grows on me. I'll report. Looking forward to some hard right handers :D

Thanks, BigCars.

fastcar:burnout:

[larryo340]

I too am 5' 11" with a 32" inseam,and drive with the seat all the way back, but not with the steering wheel in my lap (I can't take quick turns fast with it low). I find the pedal in perfect position. I can keep my foot flat on it when I take hard turns. I also can understand your concern with weight reduction, but seriously about a pound in a heavyweight car is never going to be noticed in anyway shape or form. If you are gutting the car and making a race only then ok. Heck the best way for me to make my car lighter is to lose weight.;)
Long story short the pedal is GREAT, and I wouldn't change a thing.

[dalucifer]

just got mine.. I am very HAPPY

[rayjay]

Your taking too long, I want my money back.

Just kidding, looking forward to getting them next week!

Here (http://pasig.myphotoalbum.com/view_photo.php?set_albumName=a lbum08&id=IMG_0287) is a pic of Rayjay's dead pedal from BC4E.

Jeesh Tom, if I'd known you were going to publish this pic I would have cleaned the floor. :D

[ts-pa]

Just so that everyone knows; I think I may have found the only thing dirty on Ray's car when I took this pic, sorry to let the dirty secret out!:eek:

[Jimimac43]

Ok, let me try this again. 45.00 + how much for shipping to 33573 Ruskin Fl. Thanks Vince

[BigCars4Ever]

Sorry Vince but $45 was 2 years ago. My costs have gone up and now I need to charge $55. 2-3 day shipping to anywhere in the US is $15. I still have you on the list. PM me if your still interested. Thanks, Ron