PDA

View Full Version : Addco and EBC group buy


Dennis Reinhart
06-28-2006, 06:50 AM
As I have said Addco has all new management and they are stiving for fast courteous delivery of there products, so I would like to offer a group buy on Adcco front and rear sway bars at 155.00 each and the complete front and rear EBC brake kit and pads without the SS brake lines.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1138118056-completekit.jpg
fastblackmerc
06-28-2006, 07:22 AM
Now that a good deal on the Addco's.... :banana2:
KillJoy
06-28-2006, 07:58 AM
Good deal on the Sways. Those along w/ the Rear CA's make the car an entirely different animal.

KillJoy
Marauder_Santa
06-28-2006, 08:11 AM
How much for the brake kit?
MarauderTJA
06-28-2006, 09:59 AM
Dennis, I am interested in a front Addco sway bar. Let me know when everything is ready and I'll give you my credit card number.
Dennis Reinhart
06-28-2006, 11:40 AM
The EBC kit is 499.95 PS the Addco front and rear bars are 155.00 each PS

:beer: :beer:
SergntMac
06-28-2006, 03:41 PM
This is a great deal on both kits, thank you Dennis!
Dennis Reinhart
06-29-2006, 10:06 AM
I have one complete EBC kit here to ship and four more are on the way, we also have two sets of Cobra high flow exhaust for 1000.00 plus shipping, and one PI 3000 stall converter. I hope every one has a great 4th of July
Dennis Reinhart
06-29-2006, 10:27 AM
On a side note here are some older pictures of the transmissoin cooler we sold with the stainless steel lines.

http://web.iwebcenters.com/reinhartautomotive/images/MVC-191S.jpg



http://web.iwebcenters.com/reinhartautomotive/images/MVC-192S.jpg (http://web.iwebcenters.com/reinhartautomotive/images/MVC-192S.jpg)
DEFYANT
06-29-2006, 09:33 PM
Howzabout a GP on MMX driveshafts? :poke:
Dennis Reinhart
06-30-2006, 08:16 AM
Howzabout a GP on MMX driveshafts? :poke:

Ok its a done deal 475.00 FREE shipping five or more
DEFYANT
07-01-2006, 06:38 PM
Ok its a done deal 475.00 FREE shipping five or more

:bump:

Anyone interested? I'd take one. There has got to be 4 others out there who noticed the vibration at high speeds with 4:10s... :confused:
Dennis Reinhart
07-06-2006, 08:34 AM
We sold two EBC kits yesterday, and one today and several proguards so if you need any thing give Jackie a call
HotRodKristina
07-07-2006, 12:52 PM
I'm interested in an Addco rear bar!
KillJoy
07-07-2006, 12:59 PM
DOH! Man Dennis...... you just wantin' to MAX OUT my CC?? :D

That Exhaust, and now the Drive Shaft are looking VERY tempting.....

Now.....how to explain to the Misses :hmmm:

KillJoy
Breadfan
07-07-2006, 01:18 PM
Do you need anything else with the ADDCO's, i.e. new busings, end links, etc.?
Glenn
07-08-2006, 11:41 AM
Dennis:

I will take a Front SB. I will call Jackie Monday morning.

Glenn
jimlam56
07-08-2006, 11:48 AM
Do you need anything else with the ADDCO's, i.e. new busings, end links, etc.?

Nope, everything's included.
Dennis Reinhart
07-10-2006, 06:12 AM
What I am doing is trying to source another company to make the Stainless steel lines that is why the EBC is less expensive we have EBC kits ready to sell.
HotRodKristina
07-12-2006, 09:39 AM
How much is a rear bar shipped to 92630?
DEFYANT
07-14-2006, 07:09 AM
Ok its a done deal 475.00 FREE shipping five or more

:bump: again. Anybody....
juno
07-25-2006, 04:32 AM
Put me down for a drive shaft Dennis, how many does that make?
Hotrauder
07-25-2006, 06:06 AM
Dennis, Put me down for a drive shaft, please.

Defyant
Juno
Hotrauder
Killjoy?

Anyone else...we need to get this done. 4.10s need this mod badly the 70% factor is at highway grandma speed. :( Dennis
Glenn
07-25-2006, 06:21 PM
FYI: I talked to ADDCO this week and no bars for 6 weeks. They got a bad lot of steel in that caused the bars to break in QC. Can't believe they do not have an alternative steel supplier - 6 weeks!!!

Glenn
Dennis Reinhart
07-25-2006, 07:01 PM
FYI: I talked to ADDCO this week and no bars for 6 weeks. They got a bad lot of steel in that caused the bars to break in QC. Can't believe they do not have an alternative steel supplier - 6 weeks!!!

Glenn


Glenn its nice to see that you took the time to check on this, ADDCO has had a complete change of management, this has contributed to some delays, its easy to say they should have another steel supplier, but its not that simple and I am sure many of the other vendors here have been in ADDCO's situation we all depend on our suppliers, I drove 5 hours to Atlanta to have the pipes made for my air to air kit, in a mandrill bend, this man is the best around there is only ONE supplier in the USA that makes 3" aluminum in the tensile strength low enough to take a tight mandrill bend, this shop received three batches of bad metal in six weeks I was about to go nuts, I had to have the pipes made in mild steel. This is not my fault or the company that was bending the pipes, but the company who made the pipe. It is the same with ADDCO they have I am sure a fixed buying contract for a specific metal, and for them to go to another company is just not possible, now the front sway bars are about six weeks away, they should have rears in three weeks. ADDCO is striving to improve all aspects of there business, they have a proven product, so I am patiently waiting on them and so are many of you my customers, I appreciate that.