PDA

View Full Version : MAF sensior position



SlkMerc
07-11-2006, 07:34 PM
I bought a MM with what appears to be your cai. I had read somewhere that the position of the MAF is important. I am experiencing a rough idle and 14 mph from a basically stock setup. I cleaned the MAF w/ electric contact cleaner and it has not improved. The car runs well other than the mileage and idle, any suggestions?


Thank you,

Donnie

Tucker
07-12-2006, 05:02 AM
MAF position needs to be near stock which I believe to be about 10-11:00 position.
Either way MAF position shouldn't cause a a rough idle, you may want to look at the Idle control valve.

Thanks
Jay

Grifter
07-12-2006, 06:22 AM
You do have a K&N on there, and chances are you havent oiled it personally.. you should clean the sensor on the MAF, it might be contaminated with the air filter oil.