Autometer fuel pressure sender adapter?

[Fourth Horseman]

For those that have installed an autometer fuel pressure gauge in their cars I'm wondering which adapter you used between the sender and the schrader valve on the fuel rail. The instructions say to use Autometer part #3275, but when I looked that adapter up on Jeg's it doesn't look like it would work. Is that the correct part? Which part did you use? Thanks for the help!

[O's Fan Rich]

I used #3280 It puts the sender right under the IAC .
But the schrader valve is in a bag right now.

[Fourth Horseman]

I used #3280 It puts the sender right under the IAC .
But the schrader valve is in a bag right now.

Oh, so you removed the shrader valve completely? I was under the impression that the adapter screwed onto the valve.

[Marauderjack]

I had to have one made and will get you one made here if you cannot find one??

It cost me about $5.00 and I can post a photo of mine if you wish??:confused:

Marauderjack:D

[O's Fan Rich]

I had to have one made and will get you one made here if you cannot find one??

It cost me about $5.00 and I can post a photo of mine if you wish??:confused:

Marauderjack:D
Were you able to keep the schrader? I'd like to get it back on the fuel rail.
I'd like that pic if so.

[Fourth Horseman]

I too would like to see a pic if you get a chance. Thanks for the help guys.

[Marauderjack]

NO.....Could not keep the Schrader but the pressure sender works fine!!:bows:

I guess you could put a "tee" in it for the Schrader if you want to keep it.....but why??:confused:

Marauderjack:cool: