Mmx Drive Shaft Group Buy

[Hotrauder]

Kind of lost at the end of the Addco EBC group buy is an offer from Dennis for MMX Driveshaft group buy for $475 with free shipping for 5 orders or more. Current commitments are:

Defyant
Juno
Hotrauder
Killjoy?

NOTE: SEE DENNIS' POST ON DRIVE SHAFT PERFORMANCE

Anyone else. The 70% safety factor is right about highway speed for anyone with 4.10's whether there is felt vibration or not. Everyone who visits the drag strip or race track should be seriously considering this mod. IMHO Dennis

[KillJoy]

After speakin' with this misses..... I will NOT be able to take part in this group buy :(

Good luck though!

KillJoy

[Dennis Reinhart]

After speakin' with this misses..... I will NOT be able to take part in this group buy :(

Good luck though!

KillJoy


Tell he you will take her on a cruise that will work:beer:

[KillJoy]

Tell he you will take her on a cruise that will work:beer:

Iffin the Baby were not due in 3 1/2 weeks..... I would have already called! :coolman: I really want one...... but.... it's time to start getting my priorities in line. :o

Don't feel too bad for me though.... the SuperCharger install is going well :D

KillJoy

[Rider90]

...neat group buy...http://midwestpanthers.net/hah.jpg

[DEFYANT]

I am in - and then some... :D

[DefyantExWife]

I am in - and then some... :D



http://img.photobucket.com/albums/v682/snexus/tired.gif

[Hotrauder]

Current list

Defyant
Juno
Hotrauder
sweetair?

Who else. We need 5. $475 w/ free ship is a deal. Dennis:beer:

[ghost03]

Count me in as well

[juno]

Count me in as well

Whoopee! Thanks Rob!
Now we need 1 more definite!

[Wires]

475 out the door?

Can a doofus like me install it?

[Dennis Reinhart]

475 out the door?

Can a doofus like me install it?

All you need is lock tight and a 12MM 12 piont socket or open end wrench

[DEFYANT]

All you need is lock tight and a 12MM 12 piont socket or open end wrench

What he said ^^^.

Simple mod.

[Hotrauder]

Latest known count:

Defyant
Juno
Hotrauder
Ghost03

sweetair?
Wires?

Who makes 5? We need 5 for the GB at $475 w/ free shipping. Lets go. Dennis:2thumbs:

[RF Overlord]

Can a doofus like me install it?

Raise back-end of car on ramps or jackstands.
Remove 4 pinion flange bolts.
Slide old D/S from transmission tailshaft.
Slide new D/S into transmission tailshaft.
Re-install pinion flange bolts, using Loctite, and torque to 84 ft/lbs.
Lower car.

[White Knuckles]

You can add me to the list as well. I've had this on my to-do list for a while and I'm a sucker for a group buy:D

[Dennis Reinhart]

COLD :beer: that makes 6

[Wires]

I suppose it's not going to get any cheaper for a while. I've also been considering this for quite some time.

Add me as well, if it's not too late.

[DEFYANT]

We have a winner!

Another GP.

:D :banana:

[Dennis Reinhart]

I suppose it's not going to get any cheaper for a while. I've also been considering this for quite some time.

Add me as well, if it's not too late.

No it will never be any cheaper

[Wires]

Raise back-end of car on ramps or jackstands.
Remove 4 pinion flange bolts.
Slide old D/S from transmission tailshaft.
Slide new D/S into transmission tailshaft.
Re-install pinion flange bolts, using Loctite, and torque to 84 ft/lbs.
Lower car.

Dumb question number one:
When the D/S is slid from the transmission, will transmission fluid start running out?

Some trannys do that, but I'm not educated enough to know if they all do.

[DEFYANT]

Dumb question number one:
When the D/S is slid from the transmission, will transmission fluid start running out?

Some trannys do that, but I'm not educated enough to know if they all do.

Yes, especially if the car is level. Be prepared for fluid spill. Heres an idea:

:thinker:
Get a deep trans pan and install at the same time. :D

[Wires]

Yes, especially if the car is level. Be prepared for fluid spill. Heres an idea:

:thinker:
Get a deep trans pan and install at the same time. :D

Too late. Dennis already sold me one!:banana:

(It's time to drain the pan and re-fill. I figure draining the pan every year will get enough fluid changed to keep me in good shape)

[Dennis Reinhart]

Ok we have our first confirmed sale, so give Jackie a call

[juno]

And your second confirmed sale!


Ok we have our first confirmed sale, so give Jackie a call

[Stormin Norman]

Well Dennis, it looks like I need to get in on this also. Don't want to have problems on the road trip to Detroit next month.

Norm

[DEFYANT]

Well Dennis, it looks like I need to get in on this also. Don't want to have problems on the road trip to Detroit next month.

Norm

My thoughts exactly! The detroit trip and MV4 in November, trips to the track, and...

I really want to take this car onto a road course. :bigcry: Where my speeds will remain high for long periods.

Besides, nothing good can come from a broken driveshaft. Thats why I also went with a D/S loop.

[Hotrauder]

Good news. Been away all day. Will call Jackie in the morning. This makes a lot of sense especially if you have 4.10s or above, run at the Drag strip and especially if you run road tracks. Sebring was an great experience that convinced me that the Metal Matrix and a Drive Shaft Loop should be on the shopping list. I guess that the X pipe would support the DS but who knows what force might be involved should it decide it wants pogo down the track-could take the exhaust system with it. Thanks for the support for this GB. Dennis:beer:

[DEFYANT]

BTW, my order is in :D

[ghost03]

Hey Dennis do you have the DS loop for sale to go along with the DS

[sweetair]

Dennis I found the thread. Count me in. I am a sucker for a GB as well. Give me the info on where to send the $$$. Thanks........

[Hotrauder]

Dennis I found the thread. Count me in. I am a sucker for a GB as well. Give me the info on where to send the $$$. Thanks........


Bill, call Jackie at Reinhart Automotive- 904-276-5003 today. Give her your card # and it is done. :D Dennis

[Hotrauder]

My call was order #5 so it is a done deal. Jackie will order them today so anyone who wants but has not ordered get on the phone now. 904-276-5003. Dennis:beer:

[Dennis Reinhart]

I will wait till Monday to close this out,thank you for the orders and every one have a good weekend.

[DEFYANT]

I got the DS loop and deep trans pan. Waiting on the DS.

That was some dam fast shipping! :D

[Hotrauder]

I got the DS loop and deep trans pan. Waiting on the DS.

That was some dam fast shipping! :D

Good call, Charlie. I did those before the Sebring adventure. I have no way of knowing if the effect is more than peace of mind but is seems that the more volumn of tranny fluid the cooler it should run. I still have not gotten my secondary cooler installed but perhaps this weekend.:D Dennis

[2003DOHC]

Order placed this A.M,Thank You!!

[Wires]

I will wait till Monday to close this out,thank you for the orders and every one have a good weekend.

Thank goodness. I was tied up all day and didn't get to call!

Note to self: Call Monday!!

[sweetair]

what he ^^^^^^said.

[Dennis Reinhart]

Today is the last day of the GB s0 give Jackie a call, before 5PM, she allready has the list made up, I will hold it till the end of the day before faxing it in, and thank you for your sales.

[Dennis Reinhart]

Well I want to thank all the member the GB it did close today and we sold ten shafts the sheet has been turned in dyntotech, this was fun, and it went very smothly, every one will have there sfafts with in ten days thank all the members for this sale and thank your continued support,

[juno]

Thanks Dennis!

[2003DOHC]

UPS delivered my metal matrix drive shaft today. Thank you for the fast service and great price,now to find the time to do the install.

[sweetair]

Dennis, thanks. I got my DS today as well. Now to get it installed. Not hard but time.:D