wchain
08-08-2006, 01:45 PM
With the indefinite hiatus of the 3.5" Delete Tips, I thought I would cross post here....
Heres some photos of the 4" prototype (the packing inside will not be there and the tips will be LONGER, 26")
The rolled edge is 15 degrees vs 30 on the stock MM, but he's checking to see if their machinery can be rolled steeper. I had to put my bib on when I got these in :drool:
Please excuse the dirty Marauder.
He'll make them if we can get runs of 10, so once I get 10 or more, we can do a batch, then if another 10 comes up, we can do another run.
Price will be around $250, and of course, I will cover ground shipping within the Continental US. Canada, AK and HI, I'll split shipping with y'all. MENINBLK has also expressed interest in a whistler version of these too, I'll be contacting Bubb Rubb to see about getting some made....
http://images16.fotki.com/v300/photos/4/41821/142907/IMG_0144-vi.jpg
Again, this is just a prototype tip. The packing/resonator material will not be inside it.
http://images1.fotki.com/v314/photos/4/41821/142907/IMG_0145-vi.jpg
http://images15.fotki.com/v263/photos/4/41821/142907/IMG_0146-vi.jpg
This pic shows the angle a little better. Actual tip length will be 26" like
The factory tip.
http://images17.fotki.com/v308/photos/4/41821/142907/MM4INCH-vi.jpg
I wasnt holding the tip even with the other one, but you can see the rolled angle differences.
Chime in if youre interested!
Wes
Heres some photos of the 4" prototype (the packing inside will not be there and the tips will be LONGER, 26")
The rolled edge is 15 degrees vs 30 on the stock MM, but he's checking to see if their machinery can be rolled steeper. I had to put my bib on when I got these in :drool:
Please excuse the dirty Marauder.
He'll make them if we can get runs of 10, so once I get 10 or more, we can do a batch, then if another 10 comes up, we can do another run.
Price will be around $250, and of course, I will cover ground shipping within the Continental US. Canada, AK and HI, I'll split shipping with y'all. MENINBLK has also expressed interest in a whistler version of these too, I'll be contacting Bubb Rubb to see about getting some made....
http://images16.fotki.com/v300/photos/4/41821/142907/IMG_0144-vi.jpg
Again, this is just a prototype tip. The packing/resonator material will not be inside it.
http://images1.fotki.com/v314/photos/4/41821/142907/IMG_0145-vi.jpg
http://images15.fotki.com/v263/photos/4/41821/142907/IMG_0146-vi.jpg
This pic shows the angle a little better. Actual tip length will be 26" like
The factory tip.
http://images17.fotki.com/v308/photos/4/41821/142907/MM4INCH-vi.jpg
I wasnt holding the tip even with the other one, but you can see the rolled angle differences.
Chime in if youre interested!
Wes