September products specials

[Dennis Reinhart]

Well why not you the members, tell me what you would like to see for a September sale and or group buy and I will see what we can do.

:beer:

[kj31067]

lets see a show of hands for a g buy on the php cold air kit!!!!:D

[Dennis Reinhart]

lets see a show of hands for a g buy on the php cold air kit!!!!:D


This unfotunatley will not work, I have to buy ten of these at a time, this is a large pruchase, last time I did this I was left with four of these, so they are here now for 285.00 PS

[kj31067]

cant blame a guy for trying..........:)

[merc]

Metco drive shaft loop

[fastblackmerc]

PHP intake spacer
Cooling mod
Art Carr deep trans pan
SCT MAF

[jawz101]

cobra exhaust

[marauderboi]

how about a discount on tunes maybe

[ghost03]

1. Trans Pan
2. Electric Water Pump

[94_302]

The real oil pressure gauge kit.

[Breadfan]

Metco drive shaft loop

2nd-ed.

...

[Marauderman]

how about a discount on tunes maybe
This sounds like a great idea---for when a large group of MM's will be coming down the I-95 for MVIV------there could be alot who may want to come earlier for a bit of ....uh.....pep.........just my thoughts---I may be even interested to stop and get a bit of ...pep --so to speak .....before going on downward..........Tom

[KillJoy]

Gears.

KillJoy

[Gre8one7]

Gears.

KillJoy

2nd, werent they at $230 a few months back? says $260 now

[SamF]

The real oil pressure gauge kit.

Agreed...with matching voltmeter.

[FordNut]

MARAUDER lettered bumper bibs!

[ROADWARRIORSVT]

Gears
Deep pan
converter

[Raudermaster]

Definately gears or a tune.

[03SILVERSTREAK]

Gears
Deep pan
converter


P I Stallion 3000 TC...

[Blackened300a]

P I Stallion 3000 TC...

I know why he chose this! :D
Right now the summer special price of $700 has been the cheapest I have seen, thats why I jumped on it.

How about a deal on the Control arms, Either the Metco or the PHP.

[DirtyDog]

I could use a couple of new tunes on my chip due to mods and dyno specs.

[03SILVERSTREAK]

I know why he chose this! :D

Paul-Your instinct serves you well :D :D :D ;)

[bigmerc'03]

vortech
air to air

[Dennis Reinhart]

Ok I have looked over all the posts, and here is the list I seemed to have come up with. Some one posted I could use a couple of new tunes on my chip due to mods and dyno specs. If you bought your tuner and or chip from me the update is Free if you have not bought your tuner from me, it will be free with any purchase from here

Vortech air to air kit 4695.00 PS

PI 3000 stall converters 700.00 PS

PHP cold air kits 280.00 PS

PHP control arms 300.00 PS

Metco control arms 435.00 PS

Marauder bumper bibs 19.95 PS

Motorsport 410 Gears 230.00 PS

PHP intake spacers 100.00 PS

Metco Drive shaft loops 45.00 PS

Cobra exhaust system 999.00 PS

Auto Meter oil pressure gauge 68.00 PS

Xcall 2 with USB cable 379.95 FS

SCT Big air maf B2400 with maf adapter and K&N air cleaner free tune 340.00 FS

Mezirie electric water pumps 330.00 PS

Art Car deep transmission pans 165.00 PS

Addco Front or rear sway bars 160.00 EA PS

Pro Guard rear skid plate 45.00 FS

Complete EBC kits 490.00 PS

[ghost03]

sounds like christmas in august......Thats a nice list of products accompanied by some nice prices..Thanks dennis

[sweetair]

Things do look good here. I will have to make a call. Just got the MMX DS and loop installed today.:D :D

[SamF]

Uh oh...that is quite a list! So if I understand it you will provide an updated tune for me if I purchase the PI 3000? I have an Xcal I bought from another member with Alternative Auto tunes. The current tune has a no lock up schedule under 63 mph, and then only in OD...Id like to try a tune with a revised lock up schedule...

This is not good, my bank account is going to suffer, no doubt :)

Sam

[Dennis Reinhart]

Uh oh...that is quite a list! So if I understand it you will provide an updated tune for me if I purchase the PI 3000? I have an Xcal I bought from another member with Alternative Auto tunes. The current tune has a no lock up schedule under 63 mph, and then only in OD...Id like to try a tune with a revised lock up schedule...

This is not good, my bank account is going to suffer, no doubt :)

Sam


I never charge customers for a updated file if they by the XCall from me, I do charge if the Xcall was bought from some one other than me, if you buy the PI converter I will send you a updated file if its needed for free

[SamF]

I never charge customers for a updated file if they by the XCall from me, I do charge if the Xcall was bought from some one other than me, if you buy the PI converter I will send you a updated file if its needed for free

The hook is in! Looks like I'll have at least one more upgrade this season :help: LOL

SF

[Raudermaster]

The Cobra exhaust doesn't come with header's does it?

[KillJoy]

The Cobra exhaust doesn't come with header's does it?

Nope. It includes Cobra Manifolds that have been coated, and X-Pipe w/ Cats and other necessary pieces parts.

KillJoy

[HwyCruiser]

Dennis, do you carry any of the wideband O2 systems, i.e. Innovative standalone XD-16 gauge kit or DynoJet Commander?

[Dennis Reinhart]

Dennis, do you carry any of the wideband O2 systems, i.e. Innovative standalone XD-16 gauge kit or DynoJet Commander?

Yes I have three in stock it works with the Xcall 2 call me tomorrw I will add this on the web site, also ADCCO should be shipping front sway bars this week

[Dennis Reinhart]

We have five of the PHP cold air kits in stock, this is the best CAK sold so give Jackie a call will get them out.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1148502313-DSC00106.JPG

[Blackmobile]

I never charge customers for a updated file if they by the XCall from me, I do charge if the Xcall was bought from some one other than me, if you buy the PI converter I will send you a updated file if its needed for free

Suppose Someone got an Xcal from someone else who got it from you, that has your tune on it but it's not speciffic to my car?

Ed

[Dennis Reinhart]

Suppose Someone got an Xcal from someone else who got it from you, that has your tune on it but it's not speciffic to my car?

Ed

Well if some one else bought the tuner and did not return there vehicle back to stock the tuner is locked to there car, and the tuner has to go back to SCT to be unlocked and they charge 150.00. Then normally the tune is 100.00 this is what most SCT dealers charge, there are some that charge more, I charge 100.00 again I am fair. as I said for the person that bought the PI converter I will send him a file for free.

[Blackmobile]

Well if some one else bought the tuner and did not return there vehicle back to stock the tuner is locked to there car, and the tuner has to go back to SCT to be unlocked and they charge 150.00. Then normally the tune is 100.00 this is what most SCT dealers charge, there are some that charge more, I charge 100.00 again I am fair.

Yes, the person I got the Xcal from did return their vehicle back to stock before giving it to me. So we assumed your base tune was still on it, and since his mods were close to what mine were at that time we figured it wouldn't be a problem.
His mods:
were PHP cold air intake
Kooks exhaust system
410 gears
180 stat

Mine:
K&N cold air intake
DR cobra exhaust system with Flowmasters
PHP spacer
180 stat
355 gears, 410's soon to come

[Dennis Reinhart]

Yes, the person I got the Xcal from did return their vehicle back to stock before giving it to me. So we assumed your base tune was still on it, and since his mods were close to what mine were at that time we figured it wouldn't be a problem.
His mods:
were PHP cold air intake
Kooks exhaust system
410 gears
180 stat

Mine:
K&N cold air intake
DR cobra exhaust system with Flowmasters
PHP spacer
180 stat
355 gears, 410's soon to come


Try it and see what happens and call me if I can help

[Blackmobile]

Thanks Dennis :bows: for the for the September specials.

I just ordered the Metco Drive shaft loop and it will come in handy
when I get around to ordering a S/C kit in the near future. With the peer preasure I get from my fellow SSM members, I won't be able to hold out too much longer.;)

Thanks
Ed

[Svashtar]

Ok I have looked over all the posts, and here is the list I seemed to have come up with. Some one posted I could use a couple of new tunes on my chip due to mods and dyno specs. If you bought your tuner and or chip from me the update is Free if you have not bought your tuner from me, it will be free with any purchase from here

Vortech air to air kit 4695.00 PS

PI 3000 stall converters 700.00 PS

PHP cold air kits 280.00 FS

PHP control arms 300.00 PS

Metco control arms 435.00 FS

Marauder bumper bibs checking on order

Motorsport 410 Gears 230.00 PS

PHP intake spacers 100.00 PS

Metco Drive shaft loops 45.00 FS

Cobra exhaust system 999.00 PS

Auto Meter oil pressure gauge 58.00 FS

Xcall 2 with USB cable 379.95 FS

SCT Big air maf B2400 with maf adapter and K&N air cleaner free tune 340.00 FS

Mezirie electric water pumps 330.00 PS

Art Car deep transmission pans 165.00 PS

Pro Guard rear skid plate 45.00 FS

Complete EBC kits 460.00 PS

EBC Kits? I have most of this other stuff from you Dennis, (except for your exhaust which I want to buy but can't have installed here. :mad:) but this one does not ring a bell. Brakes mod?

Thanks,

Norm

[SergntMac]

EBC Kits? I have most of this other stuff from you Dennis, (except for your exhaust which I want to buy but can't have installed here. :mad:) but this one does not ring a bell. Brakes mod? Thanks, Norm This was a tough one, try...

http://www.mercurymarauder.net/forums/showthread.php?t=24337&highlight=ebc+brakes

I don't understand, why can't you get the Cobra exhaust?

[Svashtar]

This was a tough one, try...

http://www.mercurymarauder.net/forums/showthread.php?t=24337&highlight=ebc+brakes

I don't understand, why can't you get the Cobra exhaust?
Thanks Mac. I actually responded to that thread in Feb! I'm getting senile. But lost my job shortly thereafter and missed the GB and have been severely broke since then. I am definitely going to get this mod, just will have to pay a bit more now.

Back in late '04 I called Dennis with 4K burning a hole in my pocket from the sale of my old truck. I essentially bought one of just about everything he had at the time. I asked for the complete exhaust package, but rather than do the easy thing and sell it to me, Dennis did the ethical thing and volunteered the information that there was no way I would pass the smog out here with it on, and any shop that installed it would be fined.

I wanted the whole system, with the Cobra manifolds, X pipe and high flow cats, etc. With the cats on it now the engine is breathing though a straw.

I settled for delete tips from Wes. I thought about getting new Ford or other performance mufflers, but it will make zero difference on the car performance-wise so why bother.

If you know of any CA compliant exhaust which will let it pass smog and still add HP then I would be interested. But as long as I have to keep these crappy cats, nothing is really going to make an improvement IMO.

Thanks,

Norm

[SergntMac]

I understand now, Norm, thanks. I wasn't aware that the DR Cobra exhaust is not C.A.R.B. compliant. Best wishes for a solution, hope things turn around for you soon.

[ik04]

I am thinking about a Front and rear sway bar and control arms package deal. I want 'em all and keep running into timing and funding problems.

Those problems won't exist in November, so bring 'em all! I want to install them while at MV4, so I can test drive the car and feel the difference...

...While having fun, that is!

Kevin

[CRUZTAKER]

2nd, werent they at $230 a few months back? says $260 now

4:10 FMS gears are $160 retail.

[CRUZTAKER]

Is it too late for braided brake lines?
Perhaps a little cheaper this time around...:hide:

[Dennis Reinhart]

4:10 FMS gears are $160 retail.

Well you buy a hundred of them and sell them for that. I am not summit racing. I can not buy in vast quantities. I can not get those at that price and by the time I did and have them shipped and a normal mark up you are at the price as advertised.

[Tallboy]

Is it too late for braided brake lines?
Perhaps a little cheaper this time around...:hide:

I'm with Barry on this.

[Pauses while hell freezes over :P ]

A good price on the stainless brake lines and I'm in. With Barry, of course. :D

[Dennis Reinhart]

I'm with Barry on this.

[Pauses while hell freezes over :P ]

A good price on the stainless brake lines and I'm in. With Barry, of course. :D

I could do SS lines but again to disscount them you have to sell more than two sets, so if we get five confirmed I will sell them for 190.00 PS

[CRUZTAKER]

[Pauses while hell freezes over]

It was 57 degrees this morning...I knew something was up. :P

And Dennis, I knew you couldn't beat that price on gears...that was my point.;)

[jabo731]

Discount on Brakes Dennis, I need brakes in the worst way.

[Tallboy]

I could do SS lines but again to disscount them you have to sell more than two sets, so if we get five confirmed I will sell them for 190.00 PS

Is that price for front and rear?

[SergntMac]

Is that price for front and rear?Better be, I paid 225 a set of four, no GB...

[Tallboy]

Better be, I paid 225 a set of four, no GB...

Well, if it's $190.00 for front and rears, I'm in, and I think Barry will be, too.

I think these lines will finish off my Baer kit nicely.

What say ye, Dennis? Do I start a group buy thread?

[Shora]

Well, if it's $190.00 for front and rears, I'm in, and I think Barry will be, too.

I think these lines will finish off my Baer kit nicely.

What say ye, Dennis? Do I start a group buy thread?

Can anyone explain to me exactly how the these lines help improve braking? More flow? More pressure? I know that ya'll won't be paying those prices just to pimp your brakes.

[Tallboy]

Can anyone explain to me exactly how the these lines help improve braking? More flow? More pressure? I know that ya'll won't be paying those prices just to pimp your brakes.

They don't "flex" anywhere near as much as the stock lines do, improving pedal feel dramatically.

My only concession to bling thus far is my SS Inserts...:beatnik:

[Shora]

They don't "flex" anywhere near as much as the stock lines do, improving pedal feel dramatically.

My only concession to bling thus far is my SS Inserts...:beatnik:

Thanks for explaining how the brake lines work.

BTW don't you have Shakes Underbody Valet Lights? Aren't those at least somewhat bling or are you really afraid of stepping in a puddle and consider them a safety mod for your clean shoes?;)

[Tallboy]

Thanks for explaining how the brake lines work.

BTW don't you have Shakes Underbody Valet Lights? Aren't those at least somewhat bling or are you really afraid of stepping in a puddle and consider them a safety mod for your clean shoes?;)

Damn. You got me...:lol:

[sweetair]

I would go on the SS brake line kit, There is 4 I think. One more and yahoo, we got them.

[Dennis Reinhart]

Well here we are in September where did the summer go, thanks for all the purchases, we are shipping all product out. So if you need any thing give Jackie a call.

[Glenn]

Dennis:

How about a price for the front Addco sway bars?

Glenn

[Dennis Reinhart]

Dennis:

How about a price for the front Addco sway bars?

Glenn

I can do that the fronts are now just coming off back order 160 ea PS

[Dennis Reinhart]

Well so far we sold 2 EBC kits and three Xcalls yesterday thanks for sales give Jackie a call

[Dennis Reinhart]

Starting today only, through the end of September with a minimum purchase of 400.00 or more, I will include a free pro guard and the customer pays for the shipping, this does not apply to previously placed September orders.

[eric jones]

I'd be interested in the Reinhart Tune

[Bill Lalk]

I also need a tuner.

[ctrlraven]

Putting my Art Carr deep tranny pan order in today.

Edit- Just placed my order and should have it early next week woohoo

[Dennis Reinhart]

Thanks for the order, October is just around the corner so we will be closing the September sales out, get your orders in before Oct 1.

[69mach1]

Dennis,
What's your September special on the stainless steel inserts for the rear bumper? , shipping cost to Poway, Ca 92064?
I would like a set.
Thanks, Jon aka 69mach1 :burnout:

[ezratty]

I like the twin gauges idea

[Dennis Reinhart]

Today is Thursday we are approaching the end of the month. I am leaving Florida next Thursday for the event of the year at the Seymour October feast, so now is the time to place your orders, if you want me to bring product home with me, give Jackie a call. For the rest of the month I will drop all shipping charges on every thing but the EBC kits, for any purchase over 300.00 I will include a FREE Pro guard,

:beer: :beer: :beer:

[Big House]

Darn...I wait until the last day of the month to read this...I was looking to pick-up the sway bars, both front and rear. If I can still get them at the sales price I will be calling Monday to place my order.

[Dennis Reinhart]

Two more days are left so if you want to take advantage of the best sale we have had in awhile get your orders in today

[Dennis Reinhart]

We are down to the wire, tomorrow is the last day for the best sale we have ever had, so get your orders in by the end of the day, if you snooze you loose on this one.

[Dennis Reinhart]

Today is the last day for the September sale. So I wanted to thank all the members that have taken advantage of this, and thank you all for your orders, I am packing my car up today and headed to one of the best events of the year, the Seymour October feast. I am looking forward to meeting all of you.

[magindat]

Today is the last day for the September sale. So I wanted to thank all the members that have taken advantage of this, and thank you all for your orders, I am packing my car up today and headed to one of the best events of the year, the Seymour October feast. I am looking forward to meeting all of you.

Thank YOU, Dennis. Can't wait to see ya on the 16th!

[alarmguy]

Dennis, thanks for the great prices. See you in Seymour.