PDA

View Full Version : 2003 Mercury GMLS Brake light



stryker
08-31-2006, 08:21 AM
:type: Hello Marauderers here I am with my first inconvenient or fail in my almost new "M" Panther when i'm driving and sometimes suddently step the brake pedal the "brake" light goes on for a little while and then goes off ¿ What can cause this happens ? answers will be well recieved Marauderers. :wave:



STRYKER.

RoyLPita
08-31-2006, 08:26 AM
Low fluid in the master cylinder. Keep us posted.

stryker
08-31-2006, 08:45 AM
:banana2: Ok ROYLPITA Mang I will work on that right now and I let you know the results. :up:


STRYKER.

rvaldez1
08-31-2006, 09:29 AM
Low fluid in the master cylinder. Keep us posted.
Ditto, this happened in my 97' CVPI.

magindat
08-31-2006, 09:31 AM
After topping off, you may want to bleed the brakes and top off again to be sure there's no air in the lines.

Seeing you are from PR, you may want to bleed through the old fluid and replace it. Brake fluid collects moisture and becomes less effective. With humidity in southern area, you may want to perform this exercise at some time.

jgc61sr2002
08-31-2006, 09:24 PM
Faulty brake light switch.

stryker
09-01-2006, 02:55 PM
Low fluid in the master cylinder. Keep us posted.:banana2: Problen solved ROYLPITA Mang it was a little low in the brke fluid bottle I filled with a little amount of Prestone brake fluid and ! Wa'la ! but soon I will change the old fliud for a Valvoline fresh fluid new I have buy two pints of that fluid. thank you all for the quicker response and help. :2thumbs:


STRYKER.