PDA

View Full Version : 98 Cobra cooling fan?


TooManyFords
10-01-2006, 07:47 PM
Can anyone tell me if this fan will work with our wiring harness provided the correct pigtail was located?

It looks to meet my requirements of slimmer than 6 inches and has three wires like ours.

http://www.modularfords.com/forums/modular-engine-parts/4-6-engine-parts-raiator-elec-fan-starter-63499.html#post675226

Otherwise I have to call Griffin and spend more than I really want. (lol)

Thanks in advance.

John
FordNut
10-01-2006, 08:04 PM
You can take the Marauder fan and motor out of its shroud and install it in the shroud in the link. The motors work differently. MM is variable speed, the 'stang is high/low/off.
TooManyFords
10-01-2006, 08:10 PM
How about fitment? I'd hate to spend $125 and then not have it fit the radiator. Besides, is this missing a shroud of some sort or did it work good enough without one?

Anyone ever swap in a thin replacement fan that works off our factory stuff? If so, what is it and where did you get it?
FordNut
10-01-2006, 08:18 PM
It's the same one DR uses with his S/C kits. He fabs a couple of aluminum brackets to attach it to our radiators.
TooManyFords
10-02-2006, 06:27 AM
Then I think this is the same unit that Steve (Killjoy) sent me pictures of for his kit. Unfortunately, this spec'd out at 7 inches in depth so it is not thin enough.

That's ok, saved me $125 for something that would not fit!

Off to Griffin...

John
KillJoy
10-02-2006, 06:40 AM
Yup.....that's what I sent ya!! ;)

It is 7" from the face of the Radiator to the far side of the Power Module Connector Thingie (technical term :) )

KillJoy
RR|Suki
10-02-2006, 07:10 AM
Then I think this is the same unit that Steve (Killjoy) sent me pictures of for his kit. Unfortunately, this spec'd out at 7 inches in depth so it is not thin enough.

That's ok, saved me $125 for something that would not fit!

Off to Griffin...

John

My fans are super super thin... they used 2 of em, see my sig the name. Those might work for you
TooManyFords
10-02-2006, 07:15 AM
My fans are super super thin... they used 2 of em, see my sig the name. Those might work for you

Is there a part number? Are they variable speed and connect to the factory plug? (is this last wish just that, a wish?)

Thanks

john
RR|Suki
10-02-2006, 08:36 AM
Is there a part number? Are they variable speed and connect to the factory plug? (is this last wish just that, a wish?)

Thanks

john

When I go home I'll look to see if I can find a part number, as far as variable speed, I'm really not sure, they keep my car as cool as any other, but again, not sure if they are varibale speed or just hi mid low... but I'll investigate