rear height

[MdnightMarauder]

Hey guys! I just recently adjusted my rear suspension height. First I jacked it all the way up for a minute, and that looks pretty old school. Then I lowered it all the way down. Looks really mean like that. I like it. And I think it handles alot better than at the stock setting. What is your guys opinion of the rear setting? It will look even better when I get front springs.

[SlkMerc]

If so, how was that done and will it hurt the baby's bags?

[kj31067]

http://www.mercurymarauder.net/forums/showthread.php?t=25071



thanks Bunny!!!!!!!!!!!!!!!!!!!!!!!!! !!!

by the way, start out at between factory( half-way) and full tilt to the right......its pretty much right on (imho)
full tilt to the right looks and rides like every boat i put air-shocks on in my younger days and there were a few..( ''says here in the instructions she'll hold 150 psi.. ****, lets put in 140 to start and see how she looks.......sweeeet'').... have fun!!!

[Drock96Marquis]

Iwill it hurt the baby's bags?



It will not damage the air springs at all. It will effect headlamp alignment so adjust accordingly. Pinon angle as well, but the difference is moot, however.

[Rider90]

Here are some pics of mine slammed. It turned out I was about 1/2" from the bump stops, so it didn't ride too well.

http://midwestpanthers.net/d1.jpg
http://midwestpanthers.net/d2.jpg

But it handled great.

[Marauderjack]

Looks like mine when the #@&*%#@ AIR SUSPENSION was going goofy.....Ride was horrible!!!:mad2:

Currently working (cross fingers) and 29" at the wheel well lip!!:beer:

Ride is mucho bettero......AND METCOS FEEL MUCH BETTER AS WELL!!:bows:

Marauderjack:D

[MdnightMarauder]

Here are some pics of mine slammed. It turned out I was about 1/2" from the bump stops, so it didn't ride too well.

http://midwestpanthers.net/d1.jpg
http://midwestpanthers.net/d2.jpg

But it handled great.

Hey Jason what setting do you have yours set at? I have mine all the way to they left, but not sure if I want to bump it up a bit. I love how it looks though.

[KillJoy]

I have mine 1/4 way left of center.

I like is a lot :D

I know Kenny Brown lowered the rear of his cars, not sure how much though. I think he also cut the bump stops.

KillJoy

[BizTerp]

How do I find the ride height sensors? Does anyone have photos of what they look like and where they're located?

[fastblackmerc]

How do I find the ride height sensors? Does anyone have photos of what they look like and where they're located?

:shake: Dude.... start reading the posts..... click on the link in post #3 of this thread.

[BizTerp]

I did read the posts, but I missed the link. Thanks for pointing out. Seems pretty straight forward.

[bob6364]

I guess the big words are frightening so heres a picture.... :D
http://i159.photobucket.com/albums/t153/bob6364/Marauder/227059636-M.jpg

[BizTerp]

Awesome. Thanks!