merc
11-02-2006, 05:17 PM
The “On the rack” series lives on beyond the original poster. In the last couple of weeks the politics of this website was tested and members were given an opportunity to respond. I don’t create this tread to open up a can of worms. My intention is add value to this site by posting useful information. Todd Fisher (TAF) is one of my closest friends, on or off this site. He has solved several difficult problems for me without compensation. This site has been very helpful with gathering information; let's not debate the past. Without my friends on this site I would be completely lost.
Below is a set of pictures that show my modified drive loop and new exhaust extensions. I had problems after the drive loop was installed because the left rear O2 sensor transmitted vibrations to the seat bolts and at times was very concerning. Relocating the sensor fixed all the problems.
http://www.mercurymarauder.net/showcase/files/2/3/8/Ontherack.jpg
Look closely and you will be able to see the X-pipe has uneven length O2 sensors. This is not a problem unless you are installing a drive loop.
http://www.mercurymarauder.net/showcase/files/2/3/8/modifieddriveloop.jpg
http://www.mercurymarauder.net/showcase/files/2/3/8/RelocatedO2.jpg
Brian, the master at his trade.
http://www.mercurymarauder.net/showcase/files/2/3/8/tigexhaustpipe_256297.jpg
The new pipes
http://www.mercurymarauder.net/showcase/files/2/3/8/Newtubes.jpg
old exhaust
http://www.mercurymarauder.net/showcase/files/2/3/8/oldexhaust.jpg
I am ready for the new Wideband meter
http://www.mercurymarauder.net/showcase/files/2/3/8/widebandready_909530.jpg
This is the type of work every Marauder onwer would be proud of.
PS: I saw a 658 rwhp marauder on the dyno today. No, it's not Marty's car, but it will be at SSHS6 Saturday.
Below is a set of pictures that show my modified drive loop and new exhaust extensions. I had problems after the drive loop was installed because the left rear O2 sensor transmitted vibrations to the seat bolts and at times was very concerning. Relocating the sensor fixed all the problems.
http://www.mercurymarauder.net/showcase/files/2/3/8/Ontherack.jpg
Look closely and you will be able to see the X-pipe has uneven length O2 sensors. This is not a problem unless you are installing a drive loop.
http://www.mercurymarauder.net/showcase/files/2/3/8/modifieddriveloop.jpg
http://www.mercurymarauder.net/showcase/files/2/3/8/RelocatedO2.jpg
Brian, the master at his trade.
http://www.mercurymarauder.net/showcase/files/2/3/8/tigexhaustpipe_256297.jpg
The new pipes
http://www.mercurymarauder.net/showcase/files/2/3/8/Newtubes.jpg
old exhaust
http://www.mercurymarauder.net/showcase/files/2/3/8/oldexhaust.jpg
I am ready for the new Wideband meter
http://www.mercurymarauder.net/showcase/files/2/3/8/widebandready_909530.jpg
This is the type of work every Marauder onwer would be proud of.
PS: I saw a 658 rwhp marauder on the dyno today. No, it's not Marty's car, but it will be at SSHS6 Saturday.