Tranny cooler and pan upgrades

[Eric91Z]

OK, I was thinking of doing the FRPP tranny cooler and pan upgrades this winter or spring. I have looked through some of the old threads on this. I found this part number for the pan: M-7095-4R, but that does not show on the FRP website ( http://www.fordracingparts.com/parts/category.asp?catID=26&catdesc=Automatic%20Transmissi on) and didn't come up on a search on the site.

Anyone know if this is still an available part?

Also, I found this for the tranny cooler: M-7095-SR - is this the correct FRPP tranny cooler to use on our cars?

EDIT: Never mind, I clicked on the M7195-AOD and there was a link in there for the M-7195-4R pan. It shows on there. Wonder why it didn't show up on a search of the site?

[Eric91Z]

Also, will any 8.8 rear end cover/girdle work on our car? So anything out there that would work on an Mustang 8.8 rear would work for ours, right?

[SergntMac]

The FRP 8.8 girdle fits and works on our MMs. It's on the "snug" side with the Addco sway bar in place, but not to worry, it fits.

One word of caution, the girdle will "seep" rear end gear lube. Nothing serious, maybe a drop or two a month, but it will always look wet. It's from the metals used, cast iron and aluminum shrink and expand (from changing temps) at different rates. (Shrug)...Side effect?