Baer Brakes

[glassman99]

Got mine coming. Baer has b/o Marauder brakes for at least 4 weeks. Gotta whoa this beast down! Also got the DR sway bar coming, going to put them on at he same time. Then it's a road trip to Blood Mountain to check them out. Maybe put on some Creedance?

[TAF]

Alright...you MUST make the trip to the next breakfast to show off those brakes...I'm jealous already.

[glassman99]

Probably won't have them in time for the next but the one thereafter you bet!

[JamesHecker]

Originally posted by glassman99
Got mine coming. Baer has b/o Marauder brakes for at least 4 weeks. Gotta whoa this beast down! Also got the DR sway bar coming, going to put them on at he same time. Then it's a road trip to Blood Mountain to check them out. Maybe put on some Creedance?

You getting rotors and calipers for the front and rotors only for the back?

[glassman99]

Cross drilled front and rear rotors, the front being two-piece, with red calipers for the front only. I realize the back won't do much but did it to match the front.

[darebren]

where did you get the sway bar? Dennis Reinhart? does he have front and rear? have you considered the Eiback springs too?

[glassman99]

The sway bar is from Dennis. I have not received it yet, Dennis said it will take about a week. Only the rear bar at this time is available.

[Fourth Horseman]

Does Baer make a replacement caliper for the rear? I'm just curious if you opted to pass on it or if they aren't available.

[darebren]

can you get the eradi plus 1 rotor for the rear (larger but still uses stock calipers)? Also, are you using the stock rear calipers? last i heard no one has any replacements.

[JamesHecker]

Last I checked with Baer, there was no rear caliper available.

[SergntMac]

There is another thread open right now where the topic has turned to consideration of brakes.

Before I sold my first MM, the BaerClaw kit was next on my list for mods. Back when I shopped the kit, Baer at first said they didn't have anything, but pieced it all together from their inventory since most of our brake components are shared with HP Mustangs and CV/PI. However, since then I believe they have given the MM it's own kit number.

Baer can sell you everything you need, or, want, their inventory is about the largest on the web, and Baer is the most affordable in HP brake systems. You can get calipers in powder coat colors, or polished, and for the rear too. You can get rotors slotted or cross drilled, or both. You can get rotors "zinc washed" at an extra charge, which addresses natural rusting. You'll also get quite a choice in pads, even Kevlar is available. If you order new calipers, order two sets of pads, keep one set on hand for speedy repairs.

Bolt it all together and you'll have one kick azz set of hooks, and quite stylish too. Anticipate 1500. for the "Full Monty," install should be a breeze at any local brake shop. Call or visit www.Baer.com for the most recent 411?

[jgc61sr2002]

Originally posted by darebren
where did you get the sway bar? Dennis Reinhart? does he have front and rear? have you considered the Eiback springs too? Dennis stated in a previous thread that "the front sway bar is sufficient".