The teflon and ceramic coated pistons are back!!! PIX included

[Loco1234]

here is a shoot of all of the pistons...
http://i120.photobucket.com/albums/o191/Loco4321/PICTURE-037-1.jpg

heres a close up of the pistons ceramic coating....
http://i120.photobucket.com/albums/o191/Loco4321/PICTURE-049-1.jpg

This is a close up shoot showing the teflon coating.
http://i120.photobucket.com/albums/o191/Loco4321/PICTURE-046.jpg

[alarmguy]

ooohh....pretty

[ctrlraven]

Their....so....beautiful :drool:

[merc]

back from where ?

[Raudermaster]

Those are perrrrty. Are you throwin those in the MM? Are you goin to supercharge it?

[Loco1234]

I just got them back from the ceramic/teflon coater....

My Marauder is already supercharged...
it is running on 10PSI from a vortec....

My new setup is gonna include a built bottom end. bored out to 5.0L

It will also be upgraded to a T-trim supercharger running at 16psi.

I have many many other performance mods aswell....


before my need motor upgrade/supercharger upgrade I got these dyno #'s:
RWHP: 425
RWTQ: 427ft/lbs

I had the motor purposely tuned for high torque #'s not high horsepower...\

I running the stock gear ratio for better running at the track and not the strip....

[FordNut]

Nice job. Those look so familiar...

[Loco1234]

ya don't they...lol
thanx for the help....

[superford3]

those sure are pretty

[marauderthis]

Tuned? Are you using a different cam setup to get more low end torque?



My Marauder is already supercharged...
it is running on 10PSI from a vortec....

My new setup is gonna include a built bottom end. bored out to 5.0L

It will also be upgraded to a T-trim supercharger running at 16psi.

I have many many other performance mods aswell....


before my need motor upgrade/supercharger upgrade I got these dyno #'s:
RWHP: 425
RWTQ: 427ft/lbs

I had the motor purposely tuned for high torque #'s not high horsepower...\

I running the stock gear ratio for better running at the track and not the strip....[/QUOTE]

[Jeronimojc]

That's an old post, but good question. Check out his setup in the Marauder Centri Pulley / Boost Combo Thread, post #54. It shows stock cams. It sounds like he is making even more power today. Great setup.

http://mercurymarauder.net/forums/showthread.php?t=94180&page=4


Sent from my iPhone using Tapatalk