PDA

View Full Version : Accufab Single Blade Throttle Body Part#?


BruteForce
01-19-2007, 05:02 PM
Anyone have a part number handy for the Accufab single blade TB that fits with the Trilogy?

:burnout:
KillJoy
01-19-2007, 05:28 PM
the Accufab single blade TB that fits with the Trilogy?


Is it Trilogy specific? Or is it just a MM replacement unit that happens to function well w/ a Trilogy?

KillJoy
BruteForce
01-19-2007, 06:11 PM
Is it Trilogy specific? Or is it just a MM replacement unit that happens to function well w/ a Trilogy?

KillJoy

The single blade won't work with a stock MM without cutting the bar in the opening. It will work with the Trilogy intake as it is wide open.
KillJoy
01-19-2007, 06:34 PM
Bar????

Got a pic?

KillJoy
BruteForce
01-19-2007, 08:47 PM
If you've looked in the end your stock TB, its got two intake holes, yes? If you were to take that TB off your upper intake, the opening(s) on the upper intake would match the TB in that there are two "holes" on the intake that mate with the holes on the TB. By "bar" I meant the piece that is between the two holes. See the image for what I mean. The Accufab single blade TB's blade would hit that bar. The Trilogy intake does not have the twin holes. Its one big oval opening. Hope that helps.
RCSignals
01-21-2007, 06:33 PM
If you use this single blade TB with the Trilogy, is a retune required?
911Racing
02-07-2007, 04:37 AM
I think its a CTB96-98...........................I have one if you're looking. I bought it not knowing I had to cut the bar on the intake. Let me know if you're interested. Keith V.
txmarauder
02-07-2007, 06:33 AM
If you use this single blade TB with the Trilogy, is a retune required?
Not according to Lidio
BruteForce
02-07-2007, 08:56 AM
I think its a CTB96-98...........................I have one if you're looking. I bought it not knowing I had to cut the bar on the intake. Let me know if you're interested. Keith V.


PM sent. :banana2:
fastblackmerc
02-07-2007, 11:01 AM
I think its a CTB96-98...........................I have one if you're looking. I bought it not knowing I had to cut the bar on the intake. Let me know if you're interested. Keith V.

Is the linkage correct?
911Racing
02-09-2007, 02:56 AM
fastblackmerc, Yes everything matched up properly but when the gas pedal was pressed, the blade hit the bar inside the intake. It would have been too much work for me to remove and grind down the bar on the intake. So, I boxed the Accufab and bought a BBK twin blade t/b.
RCSignals
02-10-2007, 01:25 AM
fastblackmerc, Yes everything matched up properly but when the gas pedal was pressed, the blade hit the bar inside the intake. It would have been too much work for me to remove and grind down the bar on the intake. So, I boxed the Accufab and bought a BBK twin blade t/b.

So is CTB96-98 the actual number?