Turbocharged Crown Vic

[NTHE10s]

The title says it all. The last few mouths i have been doing research and taking some fun rides in turbocharged mustangs. what a feeling... so a mouth ago i started building this setup with my two brothers.
some info on the car 2v built motor,4r70w built trany,and many other things.
here are some pic's of the first stages
before:http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236190_6.jpgAfter:http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236190_35_full.jpg


turbo is a GTS76mm:D i well update when all is finished.

juno: i had to lower the radiator 2inch and cut the header support and the hood to fit the piping.

[Power Surge]

The 76GTS is a killer turbo. I had that unit on my Lightning, and made 805/830 to the wheels.

[Mopar Boy]

That looks pretty cool. :pimp:

Does the heat from the turbo bother the accessories or serpentine belt?<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

[RoyLPita]

The 76GTS is a killer turbo. I had that unit on my Lightning, and made 805/830 to the wheels.

With that much power, what did that do in 1/4 mile???

[juno]

Thanks 11's!

A 76?? Get 'r done and tuned man!!!! I want to see those numbers!!

Is that an 03+? Just curious as I want to see how you run the exhaust piping around the crossmember. I am not thrilled with the PTK kit method, but it gets there.

[Rider90]

What qualifies as a "Built Motor?" Can you give us some specs - we live off this stuff. Looks very nice :coolman:

[supa_carrot]

Looks good. Any idea when that beast will finished, and what kind of power you expect her to put down? If I were you, I'd find some way to hide that piping behind the grille so you can maintain that ultimate sleeper look, just me though.

[jimlam56]

I'm looking forward to more details.

[KillJoy]

Looks good. Any idea when that beast will finished, and what kind of power you expect her to put down? If I were you, I'd find some way to hide that piping behind the grille so you can maintain that ultimate sleeper look, just me though.


Black Spray Paint ;)

:up:

KillJoy

[superford3]

now that is sex on wheels my freinds

[NTHE10s]

Looks good. Any idea when that beast will finished, and what kind of power you expect her to put down? If I were you, I'd find some way to hide that piping behind the grille so you can maintain that ultimate sleeper look, just me though.

i am shooting for 800rwhp w/20psi and some race gas.
yeah i was thinking the same thing so i built a cover w/lexan(Black)
i doubt i will use it, that blow off is just too sexy

[NTHE10s]

What qualifies as a "Built Motor?" Can you give us some specs - we live off this stuff. Looks very nice :coolman:
built motor = D.S.S Superpro mod long block forged internals(Crank/rods/piston/and crank cradle),stage 2 crower cams,piston are 19cc

Thank you everybody for the compliments.

[Power Surge]

i am shooting for 800rwhp w/20psi and some race gas.
yeah i was thinking the same thing so i built a cover w/lexan(Black)
i doubt i will use it, that blow off is just too sexy

You may need a little more to reach 800rwhp. I made 805rwhp with a 5.4, ported 2v heads, cams, and the 76GTS at 25 psi on C16.

[JMan]

Cool! I think I have an article in MM & FF from last year with your car in it. The article detailed your "Sleeper". I think the title was Copping an Attitude! 11's weren't fast enough for you apparently? Dude, you're creating a monster! Don't you live in Florida, also? You need to make a couple of appearances at MM functions down here. I'm sure everyone will want to see that car (especially me, I'm partial to silver Vics). You've put a lot of work into it!

Keep on truckin',

J

[grampaws]

That is sweet!! Two thumbs up:banana:

[Motorhead350]

I remember reading that article too! Glad you know your on here. Stop by for a meet sometime and sign my magizine. :)

[NTHE10s]

Thanks 11's!

A 76?? Get 'r done and tuned man!!!! I want to see those numbers!!

Is that an 03+? Just curious as I want to see how you run the exhaust piping around the crossmember. I am not thrilled with the PTK kit method, but it gets there.

it is a 2000 and I had to cut the crossmember to run the piping. to run 4" like PTK ran their 2 1/2 i would have 2" of clearnce. With the power i am looking for 4 inch was as small as i could go for the exhuast so i fabed the crossmember so i could kind of go under it :D

[Justin00Stang]

What are you doing for a maf....

[stryker]

:cool: I am anxious to see that Turbo Panther finished plus pics of that beast and if possible video of that Panther running.


STRYKER. :burnout:

[NTHE10s]

Justin00Stang, I am using a Pro-m blow through

Stryker, i am putting together a start to finish wright up about it when it is finished.
BTW Thanks again guys

[Justin00Stang]

I think you should consider the 05+ maf in blow through, in a 3" or 3.5" tube depending on power level. Then you can use a mafia to get the range back.

[Zack]

Justin00Stang, I am using a Pro-m blow through

Stryker, i am putting together a start to finish wright up about it when it is finished.
BTW Thanks again guys


I think you should consider the 05+ maf in blow through, in a 3" or 3.5" tube depending on power level. Then you can use a mafia to get the range back.

You should listen to Justin, he knows hit *****.

[NTHE10s]

i went with the 3" it seems to do good just waiting for the piping to get back from coated to get her dialed in.

[Dennis Reinhart]

I think you should consider the 05+ maf in blow through, in a 3" or 3.5" tube depending on power level. Then you can use a mafia to get the range back.

We now carry all of this in stock

[Raudermaster]

Looks sweet. Can't wait to see it done. Member on CVN had a TT setup. I believe it lasted him 2 days.

[Drock96Marquis]

Looks sweet. Can't wait to see it done. Member on CVN had a TT setup. I believe it lasted him 2 days.
Lol - let's just say it didn't last very long :D

He was running a remote mount setup, the boost tubes blew off, turbos over-spun and 'died'
He was using straight cut smooth exhaust tubing with worm-gear hose clamps iirc. Not enough bite for the PSI he was pushing.

[NTHE10s]

Hey guy's i don't have not been able to touch my car sence my last post but this weekend is all about the car. Work has been insane with moves.

Anyway i am selling everything that came off the car for the superchager set up. If you are looking for a complete kit i got it. you will just need a tune and some new hose clamps. EVERYTHING For 3500.00
Contact me at 561-602-6103 Name is Rich:eek:

[KillJoy]

Hey guy's i don't have not been able to touch my car sence my last post but this weekend is all about the car. Work has been insane with moves.

Anyway i am selling everything that came off the car for the superchager set up. If you are looking for a complete kit i got it. you will just need a tune and some new hose clamps. EVERYTHING For 3500.00
Contact me at 561-602-6103 Name is Rich:eek:

What S/C was it? What all is inclided? What is still needed?

KillJoy

[NTHE10s]

Supercharger was for 99-04 Mustang Gt. Everything else will fit 00-04 CV and GM if you have pre pi heads you will have to change the pully back to the 3.33 that comes with the kit. If you have the pi heads you will be safe as long as you get the car tuned after installed.
http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236190_22.jpghttp://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236190_23.jpg
http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236190_24.jpg

[MarauderTJA]

Real nice job. Would love to see it in person as well as see it run. Join us at the Bradenton track on April 9th 5-9 PM.

[NTHE10s]

Thank you, i would like to make it but i will be testing:burnout: the new found power at one of my private testing grounds.

[Peter]

Amazing! Hope you have fun with it:beer: :burnout:

[NTHE10s]

Enjoy:cool:

http://www.youtube.com/watch?v=6P8c3UZZ8nk

[offroadkarter]

Enjoy:cool:

http://www.youtube.com/watch?v=6P8c3UZZ8nk

I saw that video before, holy crap that car is awesome! Cant wait to see it smokin the tires :D

[2,4shofast]

Very nice set up, that thing is a beast!:eek:

[Raudermaster]

Wow man finally glad it's all done! Great job on it, can't wait to see some dyno runs.

[OneBADLsE]

Hehehe....niceeeeeeeeeeeeeee

[Black_Noise]

wow.......

[Motorhead350]

Wow welcome back. Glad you hear you have more plans for this beast. Keep us updated!

[NTHE10s]

Wow welcome back. Glad you hear you have more plans for this beast. Keep us updated!
The only plan now is to DRIVE the sheet out of her....:burn:.

[watchurstep]

any new videos of this car? How is it running now and would you recommend others doing the same thing?

[OneBADLsE]

We now carry all of this in stock


shameless plug :rolleyes:

[JVJ]

The title says it all. The last few mouths i have been doing research and taking some fun rides in turbocharged mustangs. what a feeling... so a mouth ago i started building this setup with my two brothers.
some info on the car 2v built motor,4r70w built trany,and many other things.
here are some pic's of the first stages
before:http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236190_6.jpgAfter:http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236190_35_full.jpg


turbo is a GTS76mm:D i well update when all is finished.

juno: i had to lower the radiator 2inch and cut the header support and the hood to fit the piping.

That looks down right MEAN and beautiful!!! Was all of the parts and labor, timely and expensive to do? I like the set up and the idea.

[dreydin]

/tag for later!