Thumb Screws for Coil Covers

[MercModifier]

I know they were offered some time ago, not sure if they are still available.

Go to this link:
http://www.grainger.com/Grainger/wwg/viewCatalogPDF.shtml?browserCo mpatable=true&adobeCompatable=true&toolbar=false
and type in page 2346.

Im sure they have what we need and everyone has a Grainger close by! :beer:

[Sully008]

Have you checked with Wes (wchain)? I know he had them listed on his website
http://www.innovativeinterceptors.com/carcare.html (near the bottom).

[MM2004]

I got mine from Wes! :D

Top notch...

Mike

[fastblackmerc]

Our coil cover bolts are metric... no? If so the metric knurled thumb screws are on page 2345 and there are metric winged bolts on page 2347.

[Krytin]

How about these from McMaster - Carr:

[offroadkarter]

How about these from McMaster - Carr:



I dont trust theyre products after ive seen how crappy the mc master carr ball joints for the yerf dog GX150 are, but how can you screw up thumb screws :confused:

[CRUZTAKER]

Go and support our vendor Wes.

This item is tried and true, just like the ones Mac once offered here.

[Zack]

Go and support our vendor Wes.

This item is tried and true, just like the ones Mac once offered here.

Yes, they come from the same place.

[Krytin]

but how can you screw up thumb screws :confused:
You can't, they work. Made of SS w/brushed finished heads they look good and cost less than $9.00.

[RR|Suki]

Lazarus mode on this thread, since no one seems to sell these anymore, what was were the dimensions of the ones sold before? Mainly interested in what the thread size and pitch is :D

[MM03MOK]

Wes offered them and we have a set on Blackbird. Wes?

[SID210SA]

I dont think he carries them anymore.....

[RR|Suki]

Wes offered them and we have a set on Blackbird. Wes?

I went to Wes first, but he has stopped selling them. I found some on McMaster-Carr, but there are a numbr of thread sizes and thread pitch and I'm no good at measuring those kinds of things

[MCAT]

my guess with out looking would be M6x1.0 on the thread size

[Krytin]

When I get back home next w/e I'll let you know what PN I got from McMaster.

[RR|Suki]

When I get back home next w/e I'll let you know what PN I got from McMaster.


Sweet thanks man

[RR|Suki]

bump! bump! :D

[Krytin]

McMaster-Carr listing below:



63165K92
Metric Type 303 SS Knurled-Rim Knob M6 X 19 mm Threaded Stud, 19 mm Diameter
In stock
Quantity
Each 1-9 $9.16
Each 10 or more $7.67

[RR|Suki]

sweet you da man :beer:

[Embassy]

McMaster-Carr listing below:



63165K92
Metric Type 303 SS Knurled-Rim Knob M6 X 19 mm Threaded Stud, 19 mm Diameter
In stock
Quantity
Each 1-9 $9.16
Each 10 or more $7.67

It's hard to see from the attached pic in the earlier post. So, do these thumbscrews have a brushed aluminum finish or are they brass like others I've seen?

Thanks.

[Krytin]

They are 100% SS - top of head is brushed.

[Embassy]

They are 100% SS - top of head is brushed.

Perfect. Thanks. :beer:

[MM2004]

Perfect. Thanks. :beer:

Power of the I-net..

Type
Knobs
Mounting Type
Threaded Stud
Knob Type
Round
Construction
Two-Piece Construction
Round Knob Style
Round With Knurled Rim Style #1
System of Measurement
Metric
Metric Thread Size
M6
Metric Thread Pitch
1 mm
Knob Material
Stainless Steel
Metal Type
Type 303 Stainless Steel
Metal Finish Type
Plain
Stud Material
Stainless Steel
Stud Finish Type
300 Series Stainless Steel, Type 303 Stainless Steel
Head Width/Diameter
19 mm
Shank Width
13 mm
Head Thickness
6 mm
Shank Thickness
10 mm
Stud Length
19 mm
Set Screw Type
Without Set Screw

[Embassy]

They are 100% SS - top of head is brushed.

Just ordered a set to go with the new coil covers.

Thanks.

[TiTo35]

The ones Wes sold...are no more correct? But the ones he was selling came custom correct? Does this other company offer custom covers?

[Embassy]

The ones Wes sold...are no more correct? But the ones he was selling came custom correct? Does this other company offer custom covers?

AFAIK, McMaster-Carr doesn't offer covers. I just wanted their stainless steel thumb screws.

I sourced the covers elsewhere.

[TiTo35]

I sourced the covers from elsewhere.

Where? :poke: