PDA

View Full Version : Clear corners???


gmtech
03-03-2007, 06:34 PM
has anyone removed amber part of corner light?..can it be done anyone w/ pics?...saw on ebay today clear corner for crown vic but found nothing for MM
Drock96Marquis
03-03-2007, 06:44 PM
It can be done. You will need to put the light in the oven for a short time to soften the seal, and then seperate the lens from the housing. A few guys on CVN have done this to black out their headlamps and corners.
After it is apart, you can remove the amber and reseal the corner using clear RTV silicone.



Many break one on their first attempt - you may want to pickup a set of the aftermarket MM corners which have recently appeared to try this on.
gmtech
03-03-2007, 06:48 PM
thx for info ..might try it ;really dont like amber in all that black
Embassy
03-22-2008, 03:39 PM
Bumping this thread to inquire if there have been any aftermarket, clear corners made for the Marauders.

I searched on the web and have found zilch so far.

Thanks.
Raudermaster
03-22-2008, 07:10 PM
Nope, just the stock ones.
hot-rauder
03-22-2008, 08:20 PM
i remember someone saying something about removing them before but i dont think i would like it....

removing the amber is also illegal. you must have a reflective strip on the car, hence why many little imports and tuners just have a walnut sized reflector on the side.
Aren Jay
03-23-2008, 06:53 PM
The Crown Vic ones do not fit or have a screw and no where to screw it, or some such thing.

If the yellow bugs you why not tint the yellow to blue or black or some such thing. Or better yet put an amber stripe down the side of your Marauder.
Marauder
03-24-2008, 10:21 AM
Just paint them like I did.
http://i2.photobucket.com/albums/y46/diablo1200/DSC_6735.jpg
http://i2.photobucket.com/albums/y46/diablo1200/DSC_6330.jpg

Still shows some of the amber but it blends into the car a bit better.
Bobmiddle
03-25-2008, 09:52 AM
This is just an idea but if you can take them apart and remove the amber strip. Then you can take them apart and use night shade paint on the amber reflecter and re instal. This will keep it legal but alow it to be less noticeable and blend in with the darker cars.
hot-rauder
03-25-2008, 06:31 PM
This is just an idea but if you can take them apart and remove the amber strip. Then you can take them apart and use night shade paint on the amber reflecter and re instal. This will keep it legal but alow it to be less noticeable and blend in with the darker cars.


niteshading it will make it no longer reflective..... NOT LEGAL
2,4shofast
03-26-2008, 06:27 PM
Niteshades does NOT affect the reflection.;)