Looking for FPDM wiring harness.

[TooManyFords]

I'm looking for a single to dual FPDM wiring harness. Plug-n-play would be great. Pumps and tank Hat were shipped to my tuner yesterday and I have the second FPDM to be mounted. I was sure I've seen someone selling a harness that allowed adding a second FPDM but I can't find it.

Would be a bonus if it supported the Kenne Bell boost-a-pump too as that will be going in at the same time.

Any leads, let me know!

John

[Zack]

www.rwtd.com
http://www.modularfords.com/forums/2003-2004-mustang-cobra/rwtd-dual-fpdm-wiring-harness-available-68474.html?highlight=dual+fpdm

[TooManyFords]

Thanks! That is EXACTLY what i was looking for. I've forwarded the link to Corey to get it done.

John

[Zack]

Does he have the car?

[Zack]

And you wont be needing the BAP

[TooManyFords]

No, he's modifying the tank Hat and adding the focus pumps with dual -6AN bulkhead fittings so that when I do drive over we can drop it in and be ready to tune. The boost-a-pump and second FPDM are in the trunk waiting to be plugged in.

John

[TooManyFords]

And you wont be needing the BAP

If I don't then I'll sell it.

John

[Zack]

You definitely dont need twin FPDM's with Focus pumps

[TooManyFords]

Building for the future. Do it once and then I can upgrade to bigger pumps later. Besides, if I run out of fuel with the Focus pumps I bet he'll have a pair of bigger one on hand.

john

[Zack]

Building for the future. Do it once and then I can upgrade to bigger pumps later. Besides, if I run out of fuel with the Focus pumps I bet he'll have a pair of bigger one on hand.

john

Ha! Hes a GM guy.

Make sure you run 8 or 10ga wire from the Battery back to a relay that powers the BAP.

[TooManyFords]

Make sure you run 8 or 10ga wire from the Battery back to a relay that powers the BAP.

Thanks for the tip!

John