maraudernkc
03-12-2007, 07:56 AM
:burnout: Thanks to Tom(MarauderTJA) for making this deal come alive!
I said I would do it when someone ran in the 11's. I had to take my orginal post and revise it about a year ago because I was told by someone (that went to the other side) that my thread was misleading. It was not misleading. You can run in the 11's with our kit. We had several people run 12.2 and 12.3 in warmer weather and using only 8 PSI. You will need our FIT kit, Aftermarket Exhaust, Higher stall speed converter, drag radials, and a good driver.The 11's is not easy but it is a goal that can be reached. If you want to run what Tom ran, dig very deep into your pocket and get a forged motor.
Here is the deal! We will sell F.I.T. Kit #28 for $3999.00
This is a behind the grille mount. Payment needs to be here this week and the kit will ship out this week. This special is good until Tuesday night 12:00 PM CST.
IT IS READY TO SHIP NOW!!!!!!!!!!!!!!!!!!!
www.superchargemyride.com
http://i9.photobucket.com/albums/a86/superchargemyride/PCopenbox.jpg?t=1173710928
Your Kit Includes:
P1SC ProCharger Blower (Satin Finish)
2 Core Intercooler (mounted behind grille.
Blower Pulley 6 Rib (your choice on pulley size/Boost)
Blower Main Bracket
All Tubing, Hoses, & Clamps (Tubing Powder Coated Silver)
ProFlo Surge Valve
ProCharger Blower Oil
255 lph Walboro In Tank Pump
Intake Pump Connector - Plug And Play
Coolant Reservoir
90 mm MAF Lighting
Billet MAF Adaptor
2003 Cobra Injectors 39lb - Motorcraft
External Air Intake Sensor
External Air Intake Connector
Gates Belt 6 Rib
K&N Filter
Modified Coolant Transfer Tube
Intake MAF Mounting Bracket
Rad Fan Mounting Brackets
Power Steering Bracket
3/4 Rubber Cap
5/8 Tee PCV
1" Splice Coolant Tank
3/8 Splice Power Steering
1" Heater Hose Rad to Coolant Tank
3/8 Heater Hose 3ft. Rad to Coolant Tank
Hose Thermostat to Block
5/8 x 9" Transfer Tube Hose
5/8 x 18" PCV Passenger Side
5/8 x 34" PCV Drivers Side
5/8 x 3" PCV Center Section
Autolite Plugs 22C
Wire Ties
Complete Owners Manual w/ Color Photos
All Necessary Bolts, Nuts, Washers, and Clips
Read below for fine print details.
Does not come with a Diablo tuner or chip but does come with a custom Diablo Tune that will be emailed to you. If you want a custom chip, that is $200.00 or if you want a Diablo tuner than that is $350.00. Alot of members already have tuners.
$100.00 refundable deposit on transfer tube
$120.00 Shipping
$600.00 if you want FIT to Install it. Stay free at my house in Kansas City.
3% Surcharge for Paypal (sorry that's what they charge us)
Promotion ends March 13th at 12:00 Midnight CST.
This is the real deal and if you already have a Diablo tuner and you return your transfer tube than you will pay $3999.00 plus $120.00 for shipping.
First member to respond to this thread and say I want kit number #28, well it is yours.
__________________
I said I would do it when someone ran in the 11's. I had to take my orginal post and revise it about a year ago because I was told by someone (that went to the other side) that my thread was misleading. It was not misleading. You can run in the 11's with our kit. We had several people run 12.2 and 12.3 in warmer weather and using only 8 PSI. You will need our FIT kit, Aftermarket Exhaust, Higher stall speed converter, drag radials, and a good driver.The 11's is not easy but it is a goal that can be reached. If you want to run what Tom ran, dig very deep into your pocket and get a forged motor.
Here is the deal! We will sell F.I.T. Kit #28 for $3999.00
This is a behind the grille mount. Payment needs to be here this week and the kit will ship out this week. This special is good until Tuesday night 12:00 PM CST.
IT IS READY TO SHIP NOW!!!!!!!!!!!!!!!!!!!
www.superchargemyride.com
http://i9.photobucket.com/albums/a86/superchargemyride/PCopenbox.jpg?t=1173710928
Your Kit Includes:
P1SC ProCharger Blower (Satin Finish)
2 Core Intercooler (mounted behind grille.
Blower Pulley 6 Rib (your choice on pulley size/Boost)
Blower Main Bracket
All Tubing, Hoses, & Clamps (Tubing Powder Coated Silver)
ProFlo Surge Valve
ProCharger Blower Oil
255 lph Walboro In Tank Pump
Intake Pump Connector - Plug And Play
Coolant Reservoir
90 mm MAF Lighting
Billet MAF Adaptor
2003 Cobra Injectors 39lb - Motorcraft
External Air Intake Sensor
External Air Intake Connector
Gates Belt 6 Rib
K&N Filter
Modified Coolant Transfer Tube
Intake MAF Mounting Bracket
Rad Fan Mounting Brackets
Power Steering Bracket
3/4 Rubber Cap
5/8 Tee PCV
1" Splice Coolant Tank
3/8 Splice Power Steering
1" Heater Hose Rad to Coolant Tank
3/8 Heater Hose 3ft. Rad to Coolant Tank
Hose Thermostat to Block
5/8 x 9" Transfer Tube Hose
5/8 x 18" PCV Passenger Side
5/8 x 34" PCV Drivers Side
5/8 x 3" PCV Center Section
Autolite Plugs 22C
Wire Ties
Complete Owners Manual w/ Color Photos
All Necessary Bolts, Nuts, Washers, and Clips
Read below for fine print details.
Does not come with a Diablo tuner or chip but does come with a custom Diablo Tune that will be emailed to you. If you want a custom chip, that is $200.00 or if you want a Diablo tuner than that is $350.00. Alot of members already have tuners.
$100.00 refundable deposit on transfer tube
$120.00 Shipping
$600.00 if you want FIT to Install it. Stay free at my house in Kansas City.
3% Surcharge for Paypal (sorry that's what they charge us)
Promotion ends March 13th at 12:00 Midnight CST.
This is the real deal and if you already have a Diablo tuner and you return your transfer tube than you will pay $3999.00 plus $120.00 for shipping.
First member to respond to this thread and say I want kit number #28, well it is yours.
__________________