View Full Version : Metco Control Arms and Watts Linkage
Yamaha
03-29-2007, 11:17 AM
Anybody interested in trying to do a group buy ? I've done the rear sway bar, QA-1 shocks all around, 9.5 inch rear rims and plan to do the Baer GT plus 14 inch brake kit w/SS lines. This would finish off the suspension related mods. Let me know at Sbodnar@corus.jnj.com Thanks, Stan
MM03MOK
03-29-2007, 01:34 PM
Dennis Reinhart of Reinhart Automotive, who is a supporting vendor here, offers both Metco control arms and watts links. Ask Dennis about a group buy. He has a thread going now, looking for suggestions for group buys.
http://www.mercurymarauder.net/forums/showthread.php?p=482567#post48 2567
fairlane347
03-30-2007, 05:46 AM
I am interested too, price?
Or you can get in on my group buy...
http://www.mercurymarauder.net/forums/showthread.php?t=34537
sailsmen
03-30-2007, 06:05 AM
My experience is if you do the Watts Link you also need to do the frt sway or the back end gets real twitchy.
fastblackmerc
03-30-2007, 07:18 AM
IMHO, you should do the Watts link, upper and lower Metcos and front & rear Addco's. Your MM will handle 110% better.
Eric91Z
03-30-2007, 07:26 AM
IMHO, you should do the Watts link, upper and lower Metcos and front & rear Addco's. Your MM will handle 110% better.
This is the route I am going. I have all the parts, just waiting for my trip to Michigan and Lidio and his crew to do the install when I am out there.
Marauder386
03-30-2007, 07:28 AM
This is the setup I have...Addcos @ the front and rear..Metcos, including Watts link top and bottom on the backside...they say the Watts link is for bling, but I did it so the Metcos where a complete system...
:cool:
thePunisher
03-30-2007, 03:50 PM
im in on a metco arm purchase!
RCSignals
03-30-2007, 09:29 PM
But who is the group buy through?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.