HID's on Locoski's/PaCammer marauder....

[Loco1234]

Pix will be attached or linked soon just getting everything ready...

This past weekend we did alot of engine longblock work and work on the HIDs for out 04 DTR.

It's pretty dusty from sitting in a shop all winter but the motor is getting finished and the vehicle is nearing complete... so heres the HID install pic by pic...

I am gonna provide a link to Photbucket due to the size and ammount of the photos.... There are 90 photos and all all 8.2 megapixel.... u do the math...

http://s120.photobucket.com/albums/o191/Loco4321/HID%20install/

all of photos are done uploading....

This is a link to my previous thread for reference purposes....
http://www.mercurymarauder.net/forums/showthread.php?t=32791&highlight=hid


....and YES I know it DUSTY.... LOL it's been in hop all winter without an engine... sorry... it will shine by Carisle I promise... :)
please let me know if this link works... this is my first time linking an entire albumn... LOL :beer:

[larryo340]

Your link worked fine for me and my cable modem. Install looks pretty straight foward. Do you have any pics with the lights on?

[MarauderMark]

What happened to the motor?

[pacammer]

During some very heavy rains and flooding I sucked in water while traveling on a local interstate highway and had a hydro lock. Cracked the top edge off fo the piston in #7 cylinder. I did a total engine rebuild.

Gary

[Loco1234]

Ya I will start a thread tomarrow with pix of New longblock Engine...
Since that is the state the engine now is in...

There are however some very detailed pix of the T-trim Vortec being installed and mount to engine...
And alot of the intake and oil pan internals ....

[Loco1234]

private msg I got from a member... this infrormation disccussed can and will be helpful....

----------------------------------------------------------------
I viewed your photos with great interest since I to am doing a HID install.
Got the fogs done with minimal problem but the 9007 Hi/Lo kit has thrown me a curve.
I have noticed that on your install you had to change the location of some of the pins in the headlight plug.
What was the purpose of this change?
The reason that I ask is because my install is now comeplete but I find that my Hi beams are on when the Lo beams should be on and vise versa.
Will changing the location of the pins in the headlight plug cure this prblem?
thanks in advance for your answer.
--------------------------------------------------------------------

I had same issuse... lol
ya we chsnged the pins at the plug connector to correct this issuse... now are tests showed it works fine.... I would change the pins in the plug going to the light though and leave the actul hesdlig ht housing aslone except for when u need to feed wires out of it like we did....
---------------------------------------------------------------------

So i'm guessing that the green and blue wires need to be reversed, is that correct?
-------------------------------------------------------------------

you are correct...
leave black wire alone....
switch 1 & 3 the blue and green wires...

__________________