Marauder Tune, Dyno Results.

[Vortech347]

So I finally had a chance to go get my Marauder dyno'd...

With an SCT microchips 1724 tune on it the car did 235rwhp, 252rw-tq on a corrected dynojet.

With a DR tune slightly modified by data logging Via X-cal2 to get max spark without the knock sensor picking up anything and A/F leaned out at max to achieve a 12.5 A/F the car did 247rwhp and 260rwtq on a LOADED mustang dyno UNCORRECTED!!! keep in mind the correction factor here is a big deal because our air density is usually around 7000-8000ft.

My buddy ran is 03 Mach 1 5-speed with an X-pipe, SLP catback, RTWD livewire tune, and K&N filter. He did 252rwhp, 270rwqt.

My car K&N Cone on the MAF, and tune. THATS IT!!!

I'm extremely happy with the results!!! Keep up the good work Dennis!

[Dennis Reinhart]

Thank you Matt, we try to do the best, and its customers like you that keep us going, not every car has the same results and its just not always in the tune, some cars just make more power and some cars do not. The next project car is now at the shop, this is a N/A motor with 10/1 pistons good rods, fox lake heads and and hoping about 350 RWHP N/A I will post pics later on.

[MENINBLK]

Isn't a 12.5 A/F just a tad bit too lean ?

[Dennis Reinhart]

Isn't a 12.5 A/F just a tad bit too lean ?

Not for a N/A car

[whd507]

I'm loving my x-cal tune, thanks Dennis! I may start playing with the software just for grins, but the installed 3.55 tune is great!

now I want to dyno it...

[Vortech347]

My wife will be racing the Merc tonight at the drag strip since her Cobra is down (busted 1/2 shaft) so I'll let you know how it does. Last time at the track it had 3.55's and the Microtuner tune on it. I believe it ran 15.9's (remember we're at 8000-10000ft air density) Its not nice to N/A cars.

I'll post the results tonight.