CVPI on the Dyno...

[magindat]

While I was at DR's this weekend for various projects, he had this unmodified PI on the dyno. It got Kooks headers ONLY.
Stock ratings are 250HP and 287T. After 20% driveline loss, this should be about 200HP and 230T. As I recall it ran 220HP and 260T TO THE WHEELS. This equates to about 260HP and 312T at the crank! That's 10HP, but 25T over stock. I love to watch dyno runs!!!! This gave me a taste, since I was next!!
http://www.mercurymarauder.net/showcase/files/3/5/4/8/PIC00078.JPG

[OneBADLsE]

While I was at DR's this weekend for various projects, he had this unmodified PI on the dyno. It got Kooks headers ONLY.
Stock ratings are 250HP and 287T. After 20% driveline loss, this should be about 200HP and 230T. As I recall it ran 220HP and 260T TO THE WHEELS. This equates to about 260HP and 312T at the crank! That's 10HP, but 25T over stock. I love to watch dyno runs!!!! This gave me a taste, since I was next!!
http://www.mercurymarauder.net/showcase/files/3/5/4/8/PIC00078.JPG


The 02' as pictured above was only good for about 239 HP to the crank. Those cars were a bit under rated because i believe mine to put down about the same power (judging by 1/4 mile and 0-60 times)

:burnout: